Instruction/ maintenance manual of the product FPCCC24 Fujitsu Siemens Computers
Go to page of 8
These instruc tions provide details on using the FPCCC24 Bump Case. This case is designed for use with your T ablet PC. The bump case provides added protection when t ranspor ting, using , or storing the T ablet PC. W e st ron g ly re com men d t ha t yo u rea d t he se instructions prior to using the bump case with you r com pu te r .
2 Figure 1. Bump case - Front DC-In access LAN/Modem Access Air vents Navigation button access IR keyboard port access Speaker access Applicat ion button access USB port access Infrared port access PC Card access Power On/ Suspend/ Resume/ Microphone access Pen holder FPC58-0721-03.
3 Installing the T ablet PC Figure 2. Bump case - Rear T o install your T ablet PC into the bump case, position the case face down as shown in Figure 2.
4 case. Not e that the flap on the left side also op ens for port access, b ut restraining straps prev ent the system from being inserted or remo ved fro m that side. Slide the system into the bump case, with the screen facing the open window . (See Figure 3).
5 Caring for the bump case The bump case is made of rugged mat erials, and is designed to withstand daily use. T reat the case as you w ould a brief- case or purse. Occasionally , the bump case may become soiled. T o clean it, use a clean cloth and warm soap y water to wash the soiled area.
6 FPC58-0721-03.fm Page 6 Thur sday, January 22, 2004 2:01 PM.
7 FPC58-0721-03.fm Page 7 Thur sday, January 22, 2004 2:01 PM.
8 Fujitsu Computer Systems Corporation 1250 E. Arques A venue (M/S 122), Sunnyvale, California 94085 For more information, call 1-877-372-3473 or visit our W eb site at: us.fujitsu. com/computers For technical support call: 1-800-8Fuji tsu (1-800-838-5487) or e-mail us at: 8fujitsu@us.
An important point after buying a device Fujitsu Siemens Computers FPCCC24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu Siemens Computers FPCCC24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu Siemens Computers FPCCC24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu Siemens Computers FPCCC24 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu Siemens Computers FPCCC24 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu Siemens Computers FPCCC24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu Siemens Computers FPCCC24.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu Siemens Computers FPCCC24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu Siemens Computers FPCCC24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
