Instruction/ maintenance manual of the product 5BCR05 Altech Auto Security
Go to page of 8
128-6799A 1 of 8 Y our Alarm and or Remote St art unit has a configurable receiver that allows the transmitter to be programmed to operate the Lock Unlock functions with one transmitter button or with two transmitter buttons (separate Lock/ Unlock). In addition, the receiver also allows driver priority function.
128-6799A 2 of 8 2 THIS P AGE LEFT BLANK INTENTIONALL Y.
128-6799A 3 of 8 programming with the default button configurations for the first four chan- nels will be complete. TO ENTER THE PROGRAM MODE: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, Press and release the valet/program switch three times.
128-6799A 4 of 8 1 1. Within 10 Seconds, Press and hold any unused button(s) of the first transmitter you wish to control Channel 5 output, (Auxiliary Output 2) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 5 output) 12.
128-6799A 5 of 8 3 slots. If in step 3 you identified two transmitters, you will have to fill the additional two slots, etc... 4. Press and hold any unused button or combination of buttons until a long chirp is heard from the siren. Release and press the button or button combination again and again until all remaining slots are full.
128-6799A 6 of 8 To replace the transmitter battery: 1. Slide back the lock tab on the back side of the transmitter case in the direction shown. 2. Slide back the battery case cover in the direction shown. 3. Remove the discharged battery, making note of the location of the + and - contacts shown, and replace with a new type alkaline 1.
128-6799A 7 of 8 Attention: T ransmitter Ordering Department Important: T o help us expedite your order , please print all of the information legibly and mail this form and your payment according to the instructions below .
128-6799A 8 of 8 8 128-6799A © 2005 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788.
An important point after buying a device Altech Auto Security 5BCR05 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altech Auto Security 5BCR05 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altech Auto Security 5BCR05 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altech Auto Security 5BCR05 you will learn all the available features of the product, as well as information on its operation. The information that you get Altech Auto Security 5BCR05 will certainly help you make a decision on the purchase.
If you already are a holder of Altech Auto Security 5BCR05, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altech Auto Security 5BCR05.
However, one of the most important roles played by the user manual is to help in solving problems with Altech Auto Security 5BCR05. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altech Auto Security 5BCR05 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
