Instruction/ maintenance manual of the product FPCCR05 Fujitsu
Go to page of 8
The charge-only cradle is designed for a desktop , counte r top , or wall-mounted installation wher e a quick co nnection to a DC power sour ce is needed. The T ablet PC can be placed in the charge-only cradle and used while external DC power is supplied t o the cradle.
2 Installing the System in the Cradle T o install the T ablet PC in the charge-only cradle, y ou must first attach a D C adapter to the system ’ s DC por t. Attac hing the DC Adapter 1. Hold your syst em so that the left side (when viewed in portr ait mode) with the DC-in por t is facing you (Figure 1) .
3 V erify ing Batter y Size Determine whether your T ablet PC has a standard main battery or an optional high-ca pacity main battery installed. ■ If y our T ablet PC has a high-capacit y main battery installed, remo ve the spac er (F igure 2) th at is locat ed inside the cradle on the right.
4 Installi ng the T ablet PC in the Charge-Onl y Cradle 1. Place the cradle on the flat, stable location in which it will be used . 2. After v er ifying that the spacer is co nfigured correctly and the DC adapte r is attached t o the DC-in port, hold the system in landscape mode, with the b uttons arranged ac ross the top (Fig ure 3) .
5 Figure 4. DC-In Port on Cradle Remo ving the T ablet PC from the Ch arge-Only Cradle W hile holding the base of the cradle w ith one hand, gently pull the T ablet PC out of the crad le. Mounting the Crad le on a W all The charge-only cradle is designed so that it can be easily mounted to a wall.
6 Figure 5. Separ ating the Cradle 2. Once disengaged, store the base section in a safe place for future use. 3. The back of the cradle section has four holes for wall- mounting and six holes for reattaching the base section.
7 4. Attach four scr ews (sheet metal, #14 panhead, zinc- plated reco mmended, or equivalent) to the wall as shown in Figure 7. The screw heads should extend fr om the wall appro ximately 0.
8 Fujitsu Computer Systems Corporation 1250 E. Arques A venue (M/S 122) Sunnyvale, CA 94085 For more information, visit our W eb site at: us.fujitsu.com/ computers For technical support call: 1-800-8Fujit su (1-800-838 -5487) or e-mail us at: 8fujitsu@us.
An important point after buying a device Fujitsu FPCCR05 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu FPCCR05 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu FPCCR05 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu FPCCR05 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu FPCCR05 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu FPCCR05, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu FPCCR05.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu FPCCR05. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu FPCCR05 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center