Instruction/ maintenance manual of the product Ethernet 2.4 Fujitsu
Go to page of 7
C120-E155-07ENZ2 Installation Guide FUJITSU PCI GigabitEthernet 2.4 for Solaris ™ Operating System This Product is designed, developed and manufactured as c ontemplated for gener al use, including w.
No. Directory Package Name Version Function Contents FJSVgidad.us GigabitEthernet card (PW008GE4/PW0G8GE1/PW008GE5/ PW0G8GE2/PW008QG1), PRIMEPOWER250/450 secondary LAN port addon files FJSVgid.us GigabitEthernet card (PW008GE4/PW0G8GE1/PW008GE5/ PW0G8GE2/PW008QG1) Driver FJSVgidx.
2.2 Printed Documentation (Appended Papers) Not supplied. 3 Operating Environment T o use this software, the following software and hardware requirements must be met. 3.1 Software Environment 1) Basic software prerequisites Before you can use this software, one of the follo wing Ba sic Software products must have been installed on the sys tem .
board installing the Quad GigabitEthernet card (PW008QG1), this patch is needed. 4 110900-12 On Solaris 8 OS, when PCI Hot Plug function is executed to th e Quad GigabitEthernet card (PW008QG1), th is patch is needed.
4 /opt 0.1 - 3.3.2 Work area requirements None. 3.4 Dynamic Disk Resources None. 3.5 Memory Requirements The following table shows the memory required when y ou use this software for th e following operations. No. Memory required (unit:megabytes) Operation 1 9 GigabitEthernet based communication *This value shows required memory pe r a port.
LinkAggregation function can be used in Sola ris 8 OS or later 64 bit mode. The Quad GigabitEthernet card ( PW008QG1) can be used only in Solaris 8 OS or la ter , and with PRIMEPOWER 250/450/650/850/900/1500/2500/HPC2500.
If using PW008GE4/PW0G8GE1/PW008GE5/PW0G8GE2 and usi ng SCS2.3 or later, this operation is not required. And, if using PW008QG1 and using SCS2.5 .1 or later, this operation is not required. # cp /cdrom/cdrom0/FJSVgid_2.4/fjgi_s.dat /opt/FJSVcsl/etc/scsidata/fjgi_s.
An important point after buying a device Fujitsu Ethernet 2.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu Ethernet 2.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu Ethernet 2.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu Ethernet 2.4 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu Ethernet 2.4 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu Ethernet 2.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu Ethernet 2.4.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu Ethernet 2.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu Ethernet 2.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
