Instruction/ maintenance manual of the product CD408-8T Altec Lansing
Go to page of 4
CD408-8A CD408-4T CD408-8T CD408-16T CD408-32T 8” Ceiling Speakers SPECIFICA TIONS Frequency Response 82 – 16,000 Hz +/- 5dB Low frequency limit (-10 dB) 66 Hz Power Handling 32 W EIA, 128 W peak Sensitivity (SPL - 1 W 1 m) 98 dB Maximum Output (Peak SPL) 119 dB Magnet Weight 0.
ARCHITECTS & ENGINEERS SPECIFICA TION The loudspeaker shall be an Altec Lansing Professional CD408 series Duplex ® with an 8 inch (200 mm) diameter moisture resistant woofer and a broad dispersion tweeter with heat resistant voice coils.
As we are continually striving to improve Altec Lansing products, specifications are subject to change without notice. 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz One Octave Polar Response Charts 6 dB/Divis.
CD408-SS REV06 TRANSFORMER CHAR T WIRING DIAGRAM CD408 YELLOW 0.5 dB 1.0 dB 8 Ω ORANGE RED BROWN COMMON BLACK/WHITE BLACK LEAD COMMON + - Premium 4 W Premium 8 W Premium 16 W Premium 32 W 70.
An important point after buying a device Altec Lansing CD408-8T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altec Lansing CD408-8T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altec Lansing CD408-8T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altec Lansing CD408-8T you will learn all the available features of the product, as well as information on its operation. The information that you get Altec Lansing CD408-8T will certainly help you make a decision on the purchase.
If you already are a holder of Altec Lansing CD408-8T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altec Lansing CD408-8T.
However, one of the most important roles played by the user manual is to help in solving problems with Altec Lansing CD408-8T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altec Lansing CD408-8T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
