Instruction/ maintenance manual of the product ACS45.2 Altec Lansing
Go to page of 4
© 2000 Altec Lansing Technologies, Inc., Milford, PA 18337 800-ALTEC-88 • www.altecmm.com Specifications Frequency Response 35Hz – 20kHz Input Impedance 10k Ohms Satellites Driver (per satellite) One 3 inch magnetically shielded full range Power 6 Watts per satellite (12 Watts total) Subwoofer Drivers One 6.
Introduction Welcome to the extraordinary world of Altec Lansing Multimedia high fidelity sound. The patented Altec Lansing Multimedia Computer Speaker System provides the best computer audio possible.
ACS45.2 Setup Instructions Do not put the power plug into an AC outlet before all connections are made. For easy insertion of the DIN connector, notice that the arrow must face up. Use of Controls (See Figure 2) • Subwoofer Volume Control (Bass Level): With the subwoofer in the desired location, the volume control is used to mix the ACS45.
Figure 3 levelof the subwoofer with the satellite speakers. Mixing is usually done by playing a wide variety of music and speech and adjusting the control until a natural sound is obtained. (See Figure 3) • On/Off Switch: The unit is turned on/off by pressing both the up/down volume controls simultaneously.
An important point after buying a device Altec Lansing ACS45.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altec Lansing ACS45.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altec Lansing ACS45.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altec Lansing ACS45.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Altec Lansing ACS45.2 will certainly help you make a decision on the purchase.
If you already are a holder of Altec Lansing ACS45.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altec Lansing ACS45.2.
However, one of the most important roles played by the user manual is to help in solving problems with Altec Lansing ACS45.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altec Lansing ACS45.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
