Instruction/ maintenance manual of the product PL42WC51EC Frigidaire
Go to page of 10
Models PL30WC51EC PL36WC51EC PL42WC51EC ENGLISH.....................................2 FRANÇAIS................................10.
- 2 - READ AND SAVE THESE INSTRUCTIONS WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1 . Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.
- 3 - OPERATION Controls The hood is operated using the (4) push-buttons located at eye-level, on the front edge of the hood. The light switch turns the halogen lamps on and off. The blower on-low / off switch turns the blower on to its lowest running speed.
- 4 - PREPARE THE HOOD Unpack hood and check contents. You should receive: 1 - Hood 1 - Decorative Flue Assembly 1 - Parts Bag containing: 1 - Mounting Bracket 1 - Discharge Collar 1 - Flue Mounting Bracket 8 - Mounting Screws (4,8 x 38mm Pan Head) 4 - Mounting Screws (3,9 x 9,5mm Pan Head) 2 - Mounting Screws (3.
- 5 - INSTALL ELECTRICAL (DUCTED AND NON-DUCTED HOODS) WARNING: Electrical wiring must be done by a qualified person(s) in accor- dance with all applicable codes and standards. This range hood must be properly grounded. Turn off electrical power at service entrance before wir- ing.
- 6 - PREPARE THE HOOD Note: On stainless steel hoods, carefully remove the plastic protective film from all exterior surfaces of the hood and decorative flues, prior to final installation. (DUCTED HOODS ONLY) Install the discharge collar into the duct connector of the range hood.
- 7 - PREPARE THE HOOD (NON - DUCTED HOODS ONLY) Note: The following materials must be purchased separately for non-ducted recirculation installations. • Non - Ducted Recirculation Kit, Model DFKTWC51EC. • 5” diameter metal duct. 1. Discard discharge collar and damper supplied with the hood.
- 8 - INSTALL FILTERS (DUCTED AND NON-DUCTED HOODS) 1. To remove the GREASE filter, push in on the metal latch tab and tilt filter downward to remove. 2. To install the GREASE filter, align rear filter tabs with slots in the hood. Depress the metal latch tab, push filter into position and release.
- 18 - SERVICE PARTS - LISTE PIECES DE RECHANGE MODELS PL30WC51EC - PL36WC51EC - PL42WC51EC KEY No. DESCRIPTION (ENGLISH ) 9 Grease Filter 1 4 Motor Capacitor 1 6 Connection Box Support 1 6 Electrical.
- 19 - SERVICE PARTS - LISTE PIECES DE RECHANGE MODELS PL30WC51EC - PL36WC51EC - PL42WC51EC.
An important point after buying a device Frigidaire PL42WC51EC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frigidaire PL42WC51EC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frigidaire PL42WC51EC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frigidaire PL42WC51EC you will learn all the available features of the product, as well as information on its operation. The information that you get Frigidaire PL42WC51EC will certainly help you make a decision on the purchase.
If you already are a holder of Frigidaire PL42WC51EC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frigidaire PL42WC51EC.
However, one of the most important roles played by the user manual is to help in solving problems with Frigidaire PL42WC51EC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frigidaire PL42WC51EC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center