Instruction/ maintenance manual of the product FWT449GF Frigidaire
Go to page of 2
10. Start the washer by closing the door and Start the washer by closing the door and Start the washer by closing the door and Start the washer by closing the door and Start the washer by closing the door and pulling out the cycle selector knob. pulling out the cycle selector knob.
Note: If the signal is turned to the OFF position, it will not sound at the end of the cycle. EXTRA RINSE EXTRA RINSE EXTRA RINSE EXTRA RINSE EXTRA RINSE - Use Extra Rinse when additional rinsing is desired to remove excess dirt and detergent from heavily soiled loads.
An important point after buying a device Frigidaire FWT449GF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frigidaire FWT449GF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frigidaire FWT449GF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frigidaire FWT449GF you will learn all the available features of the product, as well as information on its operation. The information that you get Frigidaire FWT449GF will certainly help you make a decision on the purchase.
If you already are a holder of Frigidaire FWT449GF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frigidaire FWT449GF.
However, one of the most important roles played by the user manual is to help in solving problems with Frigidaire FWT449GF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frigidaire FWT449GF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
