Instruction/ maintenance manual of the product TME-S370 Alpine
Go to page of 23
EN FR ES 6.5" WV GA T ouc h Scr een Monit or TME-S370 • OWNER'SMANUAL Pleasereadbeforeusingthisequipment. • MODED'EMPLOI V euillezlireavantd'utilisercetappareil. • MANUAL DEOPERACIÓN Leealoantesdeutilizarequipe.
SERIAL NUMBER: INST ALLA TION DA TE: INST ALLA TION TECHNICIAN: PLACE OF PURCHASE: IMPORT ANT Please record the serial number of your unit in the space pro vided belo w and keep it as a permanent record. The serial number plate is located on the bottom of the unit.
1 -EN ENGL I SH Contents Operating Instructions W ARNING W arning ....................................... 2 Caution ........................................ 2 Precautions ................................. 3 Getting Started Location of Controls........
2 -EN DO NOT DISASSEMBLE OR AL TER. Doing so ma y result in an accident, fi re or electric shock. USE ONL Y IN CARS WITH A 12 VOL T NEGA TIVE GROUND. (Check with your dealer if y ou are not sure.) F ailure to do so ma y result in fi re, etc. KEEP SMALL OBJECTS SUCH AS BA TTERIES OUT OF THE REACH OF CHILDREN.
3 -EN PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. F or more se vere stains, please dampen the cloth with water onl y .
4 -EN Location of Controls 1 2 34 5 67 8 1 Remote IR Receiver The IR receiver r eceives the remote IR command from the r emote controller of connected devices. 2 Ambient Light Sensor Changes the LCD backlight and the soft-touch key backlit automatically , when the surrounding brightness changes.
5 -EN Switching the Source 1 T ouch the desired source on Sour ce Select screen. 4 12 3 1 AUX The AUX Input screen is displayed. • The name given as the sour ce name in “Sour ce Name” under AUX Setup Operation on page 12 is displayed. • Refer to the section titled “Auxiliary Device Operation” on page 6 for details.
6 -EN Auxiliary Device Operation If an ALPINE device is connected to AUX, the device is controllable from the unit. This section explains how to operate representative devices. This operation cannot be performed while the vehicle is in motion. In order to displa y A UX input, enable lock-out function.
7 -EN • The selected subtitle language becomes the default setting every time the power is turned on or the disc is r eplaced. If the disc does not include that language, the disc's default language is selected instead. • For some discs, the subtitles will be displayed even when this is set to off.
8 -EN DVB-T Operation (Optional Europe Only) Operable when optional Alpine DVB-T is connected. When DVB-T is selected in "Source Name" under AUX Setup Operation (page 12), the DVB-T is displayed in Source Select screen. Refer to owner's manual of DVB-T for details.
9 -EN TV Operation (Optional) Operable when optional Alpine Analog TV T uner is connected. When TV is selected in "Source Name" under AUX Setup Operation (page 12), the TV is displayed in Source Select screen. Refer to owner's manual of Alpine Analog TV T uner .
10 -EN Display Mode WIDE (Default Setting) / CINEMA / NORMAL WIDE: The monitor displays a normal picture wider to fi t in a wide-scr een monitor by evenly stretching out the pictur e horizontally . CINEMA: The monitor displays a normal picture by stretching out the pictur e vertically .
11 -EN Setup The operation cannot be performed while the vehicle is in motion. In order to operate the setup, enable lock-out function. See page 21 for details. General Setups Y ou can fl exibly customize the unit to suit your own preferences and usage.
12 -EN Adjusting the Minimum Level of Backlight (Dimmer Low Level) Min (0) to Max (16) (Default Setting: Min) If Low is set in “Setting the Brightness of the Backlighting (Dimmer)” (page 11), you can adjust the brightness of the backlighting. This function can be used, for instance, to change the screen brightness while traveling at night.
13 -EN Navigation Setup Operations Adjusts the Navigation display setting. Refer to page 14 for details. Retur ns to the factory default settings of Navigation setup. The message, "Restore default settings?" appears. T ouch "Restore" to go back to the default settings.
14 -EN Camera Display Setup Brightness / Color / Tint / Contrast / Sharpness 4 T ouch [ ▲ ] or [ ▲ ] for the selected item to change its setting. • When ther e ar e no mor e selections to view , the arrow is gray . 5 T ouch [ ] to exit display setup menu.
15 -EN Adjusting Picture Contrast Low (-15) to High (+15) (Default Setting: 0) T ouch [ ▲ ] or [ ▲ ] adjust object contrast on the screen. When it r eaches the minimum or maximum contrast level, the display shows “Low” or “High,” respectively .
16 -EN No picture is pr oduced. • Monitor ’ s mode is not switched to the mode you want to see. Switch to the mode you want to see. Make sur e your input device is connected. Picture is unclear or noisy . • V ehicle’ s battery power is weak. Check the battery power and wiring.
17 -EN Speci fi cations MONITOR SECTION Screen Size 6.5 inch Resolution WV GA Operation System TFT activ e matrix Number of Pictur e Elements 1,152,000 pcs. Effective Number of 99.99% or more Picture Elements Illumination System LED GENERAL Power Requir ement 14.
18 -EN Before installing or connecting the unit, please read the following and pages 2 to 3 of this manual thoroughly for pr oper use. W ARNING MAKE THE CORRECT CONNECTIONS F ailure to make the proper connections may result in fi re or product damage.
19 -EN PRECAUTIONS • Be sure to disconnect the cab le from the (–) battery post before installing your TME-S370. This will reduce any chance of damage to the unit in case of a short-circuit. • Be sure to connect the color coded leads according to the diagram.
20 -EN Connections White/Brown Yellow/Black Orange/White FOOT BRAKE REVERSE ACCESSORY Battery HAND BRAKE Yellow/Blue Yellow/Blue PARKING BRAKE REMOTE OUT White/Pink White/Brown White/Pink M.CONT REMOTE OUT M.CONT Red ACCESSORY Black GND T o the parking brake indicator lead.
21 -EN 1 ACC (+12V) Red Connect to vehicle accessory / ignition 2 GND Black Connect to vehicle ground line 3 REMOTE White/Brown Remote out for contr olling peripherals 4 M-CONT White/Pink “Monitor C.
An important point after buying a device Alpine TME-S370 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alpine TME-S370 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alpine TME-S370 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alpine TME-S370 you will learn all the available features of the product, as well as information on its operation. The information that you get Alpine TME-S370 will certainly help you make a decision on the purchase.
If you already are a holder of Alpine TME-S370, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alpine TME-S370.
However, one of the most important roles played by the user manual is to help in solving problems with Alpine TME-S370. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alpine TME-S370 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
