Instruction/ maintenance manual of the product FFEF3019MB Frigidaire
Go to page of 32
All about the Use & Care of your T ABLE OF CONTENTS www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352 Electric R ange 316902220 Rev B (Jan 2012) Important Safety Instructions ........................... 3 -5 Before Setting Oven Controls .
2 Thank you for choosing Frigidaire . This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance.
3 Read all instructions before using this appliance. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type.
4 IMPORTANT SAFETY INSTRUCTIONS CAUTION • Do not store items of interest to children in the cabinets above a range or on the backguard of the range. Children climbing on the range to reach items could be seriously injured.
5 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP • Know which knob controls each surface heating unit . Place a pan of food on the unit before turning it on, and turn the unit off before removing the pan. • Use proper pan size —This appliance is equipped with one or more surface units of different sizes.
6 Types of oven racks Your range may be equipped with one or more of the oven rack styles illustrated below. BEFORE SETTING OVEN CONTROLS Oven vent location The oven vent is located under the left side of the control panel (See Fig. 1). When the oven is on, warm air passes through this vent.
7 NOTES BEFORE SETTING OVEN CONTROLS About the ceramic glass cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass.
8 BEFORE SETTING SURFACE CONTROLS Flat bottom and str aight sides. Tight fitting lids. W eight of handle does not tilt pan. P an is well balanced. Pan siz es match the amount of food to be prepared and the size of the surface element. Made of a material that conducts heat well.
9 Single radiant surface elements To operate the single radiant element: 1 . Place correctly sized cookware on single radiant surface element. 2 . Push in and turn the surface control knob in either direction (Fig. 2) to the desired setting (Refer to the Suggested radiant surface element settings table Fig.
10 CAUTION Fig. 1 Fig. 2 Symbols on the backguard will help choose which portion of the dual radiant element to set. The symbol indicates a setting for the inner coil only. The symbol indicates a setting for both inner and outer coils. SETTING SURFACE CONTROLS You may switch from either single or dual element setting at any time during cooking.
11 Keep warm (some models) The purpose of the keep warm zone is to keep hot cooked foods at serving temperature. Use the keep warm feature to keep cooked foods for serving such as; vegetables, gravies, casseroles, soups, stews, breads, pastries and oven-safe dinner plates.
12 SETTING SURFACE CONTROLS Home canning Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA (United States Department of Agriculture) website and be sure to read all the information they have available as well as follow their recommendations for home canning procedures.
13 OVEN CONTROL FUNCTIONS READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various keypad functions as described below. Oven control (for models with quick bake) broil keypad— Use to select the variable broil feature.
14 SETTING OVEN CONTROLS Setting the clock When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00" . It is recommended to always set the clock for the correct time of day before using the appliance.
15 Setting the minute timer To set the minute timer: 1 . Press timer on-off keypad. 2 . Press the to increase the minute timer in one minute increments. Press and hold the to increase the time in 10 minute increments. The minute timer may be set for any amount of time from 1 minute to 11 hours and 59 minutes.
16 SETTING OVEN CONTROLS The oven may be programmed to bake at any temperature between 170°F to 550°F (77°C to 287°C). The factory preset automatic bake temperature is 350°F (177°C). To set bake: 1. Press bake . "— — —" appears in the display.
17 When the set bake time runs out: 1. " End " will appear in the display window and the oven will shut-off automatically. 2 . The control will beep 3 times every 60 seconds as a reminder until the clear off keypad is pressed. To change the oven temperature or bake time after baking has started: 1 .
18 SETTING OVEN CONTROLS Quick bake (some models) Quick bake uses a fan to circulate the oven's heat uniformly and continuously around the oven. This improved heat distribution allows for fast, even cooking and browning results. It also provides better baking performance when using two racks at the same time.
19 To set Broil 1 . Arrange the oven rack while oven is still cool. 2. Press broil . " — — "will appear in display. 3 . Press and hold the or until the desired broil setting level appears in the display. Press the for HI broil or the for LO broil.
20 The interior oven light will automatically turn ON when the oven door is opened. Press the light keypad to turn the interior oven light ON and OFF whenever the oven door is closed. The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder.
21 A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth.
22 CLEAN 2 . Press the start time keypad. The " : " in the time of day display will flash. 3 . Press and hold the keypad to scroll to the time to start a delayed self-clean cycle. Release the keypad when the desired start time is displayed. 4 .
23 Surface type Recommendation Cleaning recommendation table CARE & CLEANING • Control panel • Control keypad membrane • Decorative trim (some models) Before cleaning the control panel, turn all controls OFF, activate controls lock (if equipped) and remove any knobs from panel (some models).
24 Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. To maintain the cooktop appearance: • Do not slide anything metal or glass across the cooktop. • Do not use cookware with dirt or dirt build up on bottom; replace with clean cookware before using.
25 Aluminum foil and the cooktop - Use of aluminum foil on a hot cooktop can damage the ceramic glass. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the ceramic cooktop under ANY circumstances. Aluminum utensils and the cooktop - Care must be taken when aluminum pots or pans are used on the cooktop.
26 CARE & CLEANING Fig. 3 To remove oven door: 1 . Open oven door completely (horizontal with floor - See Fig. 1). 2 . Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door to unlock (See Fig.
27 Solutions to common problems • BEFORE YOU CALL Surface element does not heat cookware. • Lightweight or warped pans used. Use only flat, evenly balanced, medium or heavyweight quality cookware. Flat pans heat better than warped pans. Cookware materials and weight of the material affect heating.
28 Problem Solution BEFORE YOU CALL • Solutions to common problems Oven smokes excessively when broiling. • Incorrect setting or food preparation. See Setting broil instructions in "Setting Oven Controls" section. • Make sure oven door is open to broil stop position.
29 Brown streaks or specks on cooktop. • Spillovers are burnt onto ceramic surface. Use a razor blade scraper to remove soil. See "Cooktop Cleaning" and "Cooktop Maintenance" in the Care & Cleaning section. Metal marks on the cooktop.
30 NOTES.
31 This page is left blank intentionally This page is left blank intentionally Canada 1.800.265.8352 Electrolux Canada Corp. 5855 T erry Fox W ay Mississauga, Ontario, Canada L5V 3E4 Y our appliance is covered by a one year limited warrant y .
MAJOR APPLIANCE WARRANTY.
An important point after buying a device Frigidaire FFEF3019MB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frigidaire FFEF3019MB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frigidaire FFEF3019MB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frigidaire FFEF3019MB you will learn all the available features of the product, as well as information on its operation. The information that you get Frigidaire FFEF3019MB will certainly help you make a decision on the purchase.
If you already are a holder of Frigidaire FFEF3019MB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frigidaire FFEF3019MB.
However, one of the most important roles played by the user manual is to help in solving problems with Frigidaire FFEF3019MB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frigidaire FFEF3019MB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
