Instruction/ maintenance manual of the product MRD-M1001 Alpine
Go to page of 24
1 Español Français English R • OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference.
2 Español Français English Introduction: Please read this OWNER'S MANUAL thoroughly to fa- miliarize yourself with each control and function. We at ALPINE hope that your new MRD-M1001 will give you many years of listening enjoyment. In case of problems when installing your MRD-M1001, please contact your authorized ALPINE dealer .
3 Español Français English DO NOT ALLOW CABLES TO BECOME ENT ANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever , brake ped- als, etc.
4 Espa ñ ol Fran ç ais English INST ALLA TION En raison de la sortie de puissance é lev é e du MRD- M1001, une forte chaleur est produite pendant le fonc- tionnement de l'amplificateur . Pour cette raison, l'am- plificateur doit ê tre mont é dans un endroit permettant une bonne ventilation, tel que le coffre.
5 Español Français English 1 Speaker Output T erminals The MRD- M1001 has one set of speaker outputs. Be sure to observe correct speaker output connec- tions and phasing. Connect the positive output to the positive speaker terminal and the negative to negative.
6 Espa ñ ol Fran ç ais English 4 Input level switch Use this switch to match the output level of the head unit. • Adjustment Range : 0.5V-8.0V/0.1V -2.0V 5 Battery Lead (Sold Separately) Be sure to add a fuse as close as possible to the battery ’ s positive (+) terminal.
7 Espa ñ ol Fran ç ais English Cautions on wire lead connections • Use third-party Power cables currently available on the market. • Refer to the description below for the proper proce- dure. If you are in doubt about how to make this connec- tion, consult your dealer .
8 Espa ñ ol Fran ç ais English MOUNTING THE TERMINAL COVER • The product ’ s appearance can be improved by mounting the terminal cover on the main unit after installation. • Mount the terminal cover after the connections have been made and you have checked that operation is normal.
9 Espa ñ ol Fran ç ais English 3. Fastening the door 1) Close the door p . 2) Mount the door p using the two original hexagonal screws q . * Tighten the screws securely so that they do not come loose due to vibrations while the vehicle is moving. NOTES: • Be sure to fasten the door .
10 Espa ñ ol Fran ç ais English T ABLE AND FLOW CHART • There are a total of 10 adjustment modes (refer to the following table). • The modes can be accessed using the / MODE button. • More specific functions can be selected using the ENT , and buttons.
11 Español Français English 9 T ouche (DOWN) 10 T ouche MODE 11 T ouche MODE 12 T ouche ENT 13 T ouche (UP) 14 T ouche DISP 15 Indicateur d ’é tat METHODE DE FONCTIONNEMENT Commutation de l ’ affichage: (1) Appuyez sur la touche « DISP ». Chaque fois que l’on appuie sur cette touche, l’affi- chage change.
12 Espa ñ ol Fran ç ais English S é lectionner le mode d ’ entr é e 1. Appuyez sur la touche / MODE. Appuyez sur la touche ou jusqu ’à ce que « INPUT » soit affich é . 2. Appuyez sur la touche ENT . 3. Appuyez sur la touche ou jusqu ’à ce que « SEL » soit affich é .
13 Espa ñ ol Fran ç ais English R é gler la fr é quence du filtre passe bas 1. Appuyez sur la touche / MODE. Appuyez sur la touche ou jusqu ’à ce que « LPF » soit affich é . 2. Appuyez sur la touche ENT . 3. Appuyez sur la touche ou jusqu ’à ce que « FREQ » soit affich é .
14 Español Français English LEVEL EGALISA TEUR PARAMETRIQUE Activer et d é sactiver l ’é galisateur param é trique 1. Appuyez sur la touche / MODE. Appuyez sur la touche ou jusqu’à ce que « P .EQ » soit affiché. 2. Appuyez sur la touche ENT .
15 Espa ñ ol Fran ç ais English on off ON on off ON ON.OFF ON.OFF 5. Appuyez sur la touche ou pour r é gler le niveau de l ’é galisateur param é trique. • Plage de r é glage: ± 12 dB (par pas de 1 dB) 6. Appuyez sur la touche ENT . MODE DE COMPENSA TION DES GRAVES Activer et d é sactiver la compensation des graves 1.
16 Español Français English AMP 2 ON.dLY 0.2 0.2 0.2 5. Use the or button to adjust the time correction delay time. • Adjustment Range: 0 – 10ms (0.1ms step) 6. Press the ENT button. PHASE MODE Selecting the phase 1. Press the / MODE button. Press the or button until “PHASE” is displayed.
17 Espa ñ ol Fran ç ais English OUTPUT DISABLE MODE T urn the output disable mode on only when adjusting the DSP function. Only the power of DSP circuit is ON and in the current saving state. After adjustment, turn the output disable mode off. T urning the output disable mode on and off 1.
18 Espa ñ ol Fran ç ais English Selecting the memory read mode 1. Press the / MODE button. Press the or button until “ MEMO ” is displayed. 2. Press the ENT button. 3. Press the or button until “ LOAD ” is displayed. 4. Press the ENT button.
19 Español Français English IN CASE OF DIFFICUL TY Indication Cause and Solution • If the display reads as shown at the left when the DISP but- ton is pressed, the amplifier has been shutdown due to exces- sive heat. The amplifier is automatically reset.
20 Espa ñ ol Fran ç ais English ● Single-Speaker System/Syst è me à un seul haut-parleur/Sistema de un s ó lo altavoz ● Parallel-Speaker System/Syst è me à haut-parleur parall è le/Sistema de altavoz paralelo [English] 16 RCA Extension Cable (Sold Separately) 17 Head Unit etc.
21 Espa ñ ol Fran ç ais English ● Amplifier LINK System/Syst è me de LIEN d'amplificateur/Sistema de ACOPLAMIENTO de amplificador [English] 22 Amplifier LINK compatible head unit 23 Amplifie.
22 Español Français English SPECIFICA TIONS Power Output: RMS Continuous Power (at 14.4V , 20Hz to 200Hz) Per channel into 4 ohms ( ≤ 1% THD+N) ................ 500Wx1 Per channel into 2 ohms ( ≤ 1% THD+N) ............. 1,000Wx1 Power Output: RMS Continuous Power (at 12.
23 Español Français English.
24 Español Français English K ukje Pr inting Co ., Ltd 127-2 Gamjeon-dong Sasang-gu Busan K orea Designed by ALPINE J apan Printed in Korea (S) 68-00493Z18-A SERVICE CARE IMPORT ANT NOTICE This Ampl.
An important point after buying a device Alpine MRD-M1001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alpine MRD-M1001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alpine MRD-M1001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alpine MRD-M1001 you will learn all the available features of the product, as well as information on its operation. The information that you get Alpine MRD-M1001 will certainly help you make a decision on the purchase.
If you already are a holder of Alpine MRD-M1001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alpine MRD-M1001.
However, one of the most important roles played by the user manual is to help in solving problems with Alpine MRD-M1001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alpine MRD-M1001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
