Instruction/ maintenance manual of the product MW12Y3H Friedrich
Go to page of 18
English Español Français MODE D’EMPL OI M ANU AL MW09Y3H MW12Y3H MR09Y3H MR12Y3H CONSERVEZ CE MODE D'EMPLOI POUR RÉFÉRENCE UL TÉRIEUR 9332280005-01.
En-1 CONTENTS SAFETY PRECAUTIONS .................................... En-1 FEA TURES AND FUNCTIONS ........................... En-2 NAME OF P ARTS ................................................ En-3 PREP ARA TION ....................................
En-2 FEA TURES AND FUNCTIONS INVERTER At the start of operation, a large power is used to bring the room quickly to the desired temperature. Afterward, the air conditioner automatically switches to a low power setting for economic and comfortable operation.
En-3 1 a-5 a-6 a-4 a-7 OPERA TION TIMER COIL DRY Fig.3 Fig.4 a-3 Fig.2 a-2 a-1 a-8 a-8 a-9 a-1 a-3 a-12 a-13 a-1 1 a-1 0 a-15 a-14 a-16 a-17 Fig. 5 Fig.
En-4 Fig. 1 Indoor Unit a-1 Operating Control Panel (Fig. 2) a-2 MANUAL AUTO button ● When kept on pressing the MANUAL AUTO button for more than 10 seconds, the forced cooling operation will start. ● The forced cooling operation is used at the time of installation.
En-5 PREP ARA TION CAUTION! ● T ake care to prevent infants from accidentally swallowing batteries. ● When not using the Remote Control Unit for an extended period, remove the batteries to avoid possible leakage and damage to the unit.
En-6 T o Select Mode Operation 1 Press the ST AR T/STOP button (Fig.6 b-9). The indoor unit’ s OPERA TION Indicator Lamp (green) (Fig. 3 a-5) will light. The air conditioner will start operating. 2 Press the MODE button (Fig.6 b-2) to select the desired mode.
En-7 T o Stop Operation Press the ST AR T/STOP button (Fig. 6 b-9). The OPERA TION Indicator Lamp (green) (Fig. 3 a-5) will go out. About AUTO CHANGEOVER Operation AUTO: ● When AUT O CHANGEO VER ope.
En-8 TIMER OPERA TION s Before using the timer function, be sure that the Remote Control Unit is set to the cor rect current time ( ☞ P . 4). T o Use the ON timer or OFF timer 1 Press the ST AR T/STOP button (Fig. 6 b-9) (if the indoor unit is already operating, proceed to step 2).
En-9 SLEEP TIMER OPERA TION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operation is stopped. To Use the SLEEP Timer While the air conditioner is operating or stopped, press the SLEEP button (Fig.
En-10 knob(two places) Right-Left Louvers ADJUSTING THE DIRECTION OF AIR CIRCULA TION V er tical (up-down) direction of airflow is adjusted by pressing the Remote Control Unit’ s SET button. Horizontal (right-lef t) airflow direction is adjusted manually , by moving the Air Flow Direction L ouver s.
En-11 MINIMUM HEA T OPERA TION • The room temperature can be maintained at 50 ° F by pressing the MIN. HEA T button (Fig.6 b-3) so as to prevent the room temperature from falling too far . To use MINIMUM HEAT OPERATION Press the MIN. HEA T button (Fig.
En-12 SWING OPERA TION MANUAL AUTO OPERA TION Use the MANUAL AUTO operation in the event the Remote Control Unit is lost or otherwise unavailable. How T o Use the Main Unit Controls Press the MANUAL AUTO button (Fig. 2 a-2) for three sec- onds on the main unit control panel.
En-13 CLEANING AND CARE ● Before cleaning the indoor unit, be sure to turn it off and disconnect the Power Supply Cord. ● Be sure the Intake Grille (Fig. 1 a-8) is installed securely . ● When removing or replacing the air filters, be sure not to touc h the heat exc hanger , as personal injury may result.
En-14 TROUBLESHOOTING W ARNING! Symptom Doesn ’ t operate immedi- ately: Noise is heard: Smells: Mist or steam is emitted: Airflow is weak or stops: W ater is produced from the outdoor unit: Problem.
En-15 TROUBLESHOOTING Symptom Doesn ’ t operate at all: Poor Cooling performance: The unit operates differently from the Remote Control Unit ’ s setting: See Page — 8 - 9 — 6 5 CHECK ONCE MORE.
En-16 OPERA TING TIPS Dry Mode About 1 4 to 1 15 °F About 64 to 90 °F Outdoor temperature Indoor temperature Cooling Mode About 14 to 1 15 °F About 64 to 90 °F Heating Mode About 5 to 75 °F About.
F riedr ich Air Conditioning Co . 4200 N. Pan Am San Antonio , T exas 78218 USA T el. (210) 357-4400 F ax (210) 357-4490 Visit us at www . friedr ich. com.
An important point after buying a device Friedrich MW12Y3H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Friedrich MW12Y3H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Friedrich MW12Y3H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Friedrich MW12Y3H you will learn all the available features of the product, as well as information on its operation. The information that you get Friedrich MW12Y3H will certainly help you make a decision on the purchase.
If you already are a holder of Friedrich MW12Y3H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Friedrich MW12Y3H.
However, one of the most important roles played by the user manual is to help in solving problems with Friedrich MW12Y3H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Friedrich MW12Y3H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
