Instruction/ maintenance manual of the product FX-5 Freecom
Go to page of 18
Rev. 310 User Manual Rev. 315.
FREECOM FX-5 2 GB Freecom FX-5 USB 2.0 or USB 2.0 + FireWire * USB and FireWire connection to the PC: * Depends on model.
3 GB Table of Contents U SERS MANUAL System Requirements ......................................................................... Page 5 Precautionary Measures and General Notes ..................................... Page 8 C HAPTER 1: Initial operation .
FREECOM FX-5 4 GB Dear user! Welcome to the Freecom FX-5 installation. Before you install the device, we would like to ask you to carefully read the following instructions and take them into consideration, especially, when making changes to your system.
5 GB System Requirements The following hardware and software requirements must be fulfilled to ensure trouble-free operation. To use the Freecom drive, you will need a free: USB/USB-2 port* FireWire / i.
FREECOM FX-5 6 GB - for the FX-5 Combo CD-RW / DVD: Pentium II Processor or higher at least 32 MB RAM at least 40 MB of free hard disk space (Recommended: Pentium II Processor, 64 MB RAM, 800 MB free hard disk space) Windows 98, ME, 2000 or Windows XP To play back DVD Movies, a DVD-Movie decoder is needed.
7 GB Media Formats Media Formats - for the Freecom FX-5 DVD: The Freecom FX-5 reads the following formats: MS-DOS data CDs (High Sierra, Mode 1 & Mode 2 complying with ISO 9660) Data C.
FREECOM FX-5 8 GB Precautionary Measures and General Notes After transport, particularly at low outside temperatures, condensation can form which can lead to a malfunction. For that reason, you should not begin operation until the drive and CDs have reached room temperature.
9 GB 1 C HAPTER 1: Initial Operation - Brief Description 1 . Plug in the connection cable to the FX-5. 2 . Connect the power cable supplied to the designated power connector on the Freecom drive. 3 . Plug the power supply of the Freecom drive into the power outlet.
FREECOM FX-5 10 GB 1 1. 1 Assigning the drive letter After successfully completing the installation of the Freecom FX-5, a new drive letter is assigned automatically (the first available letter after the internal hard drives). This can shift the drive letter of an internal CD-ROM drive (for example, 'D' to 'E').
11 GB 2 C HAPTER 2: Driver Installation Under Windows ME / 2000 / XP a separate Freecom driver is not required. The drivers for Windows ME, Windows 2000 and Windows XP will be installed automatically by the operating system after plugging the Freecom FX-5 into the USB or FireWire port of the computer.
FREECOM FX-5 12 GB 2 6 . The Hardware Wizard finds a "Freecom FX-5". By clicking on "Next" the necessary files will be installed. Afterwards click on "Finish". The "Add New Hardware" Wizard opens again saying a new "USB Mass Storage" Device is found.
13 GB 2 2.2 FireWire version Installation under Windows 98 SE Note: FireWire (IEEE 1394) is only supported by Windows 98 SE (and above). If you are using an older version, you must first update Windows. 1 . The driver database is loaded automatically after you have connected the FireWire cable to the PC.
FREECOM FX-5 14 GB 3 ONLY FX-5 CD-RW AND FX-5 COMBO CD-RW / DVD VERSION C HAPTER 3: The CD Recording Software Installing the CD Recording Software After installing the driver software, your Freecom FX-5 is now able to read CD-ROMs. To record a blank CD, you must first install the writing software (for the mastering or the packet writing procedure).
15 GB 3 3. 3 Preparing to write a CD (PC only) Before creating a CD: 1 . By clicking " Start " - " Programs " - " Accessories" - " System Tools " -" ScanDisk " check your hard disk with the ScanDisk program .
FREECOM FX-5 16 GB 3 3.4.2 The Packet Writing procedure can be used to create CDs without starting a special mastering program. The Packet Writing procedure allows you to use blank CDs in combination with the Universal Disc Format (UDF), simular to an additional hard disk or floppy disk.
17 GB 4 C HAPTER 4: Troubleshooting General problems (depending on the type of connection) If you still have problems getting your Freecom drive to function properly despite having installed it correc.
FREECOM FX-5 18 GB 4 Freecom Internet Service Freecom Technologies have the following service available on the Internet at www.freecom.com Online information about technical problems current p.
An important point after buying a device Freecom FX-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Freecom FX-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Freecom FX-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Freecom FX-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Freecom FX-5 will certainly help you make a decision on the purchase.
If you already are a holder of Freecom FX-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Freecom FX-5.
However, one of the most important roles played by the user manual is to help in solving problems with Freecom FX-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Freecom FX-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
