Instruction/ maintenance manual of the product FFPD100 Franke Consumer Products
Go to page of 8
FFP D 100 SERIES Swivelling spout faucet with spray head Installation guide.
2 ENGLISH P AR TS LIST G 1561.XX Handle G R0171.XX Ring cap G 01 156 Cartridge G R0338031 Fastening set (rubber washer , triangular ange, metal washer , nut) G R0593 V alve-holder G 01735 Supply exible hose G 01648 Flexible hose G 28734.XX Spray head G 01431.
3 ENGLISH Faucet installation Please remove all components from package and inspect prior to installation (see itemized table and picture). NOTE: Call us immediately if you see inconsistencies.
4 ENGLISH 4. Install the mounting hardware (G R0338031) to the threaded shank in the following sequence: 1 - round at ber washer 2 - triangular shaped plastic support 3 - at metal washer 4 - thread brass nut 5. Assure that the handle and spout are properly aligned in forward position 6.
5 ENGLISH 8. Flush out debris from water lines and faucet. 1. Pull spray hose out of the faucet spout and point the open end towards the sink drain. 2. Open faucet handle - cold side rst - by turning handle to the right and mov - ing it upward. 3. Let the faucet run on cold for 15 to 30 seconds.
6 ENGLISH Standard maintenance and trouble shooting Cleaning of the spray head Any deposits which may accumulate on the nozzle can be removed by simply running a nger over the rubber extrusions and then running the water for a few seconds. In extreme cases this step may have to be repeated.
7 ENGLISH Replacing the Headvalve 1. Shut off the water supply to the faucet. 2. Open the faucet briey to relief any pressure inside the faucet. 3. Move the faucet knob to the “OFF” position. 4. Use a the provided allen key to loosen the set screw which is accessible from the back of the handle.
8 ENGLISH Limited lifetime warranty Franke Consumer Products, Inc., Kitchen Systems Division extends the following warranty to the origi - nal purchaser of its faucets effective January 1, 2003.
An important point after buying a device Franke Consumer Products FFPD100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Franke Consumer Products FFPD100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Franke Consumer Products FFPD100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Franke Consumer Products FFPD100 you will learn all the available features of the product, as well as information on its operation. The information that you get Franke Consumer Products FFPD100 will certainly help you make a decision on the purchase.
If you already are a holder of Franke Consumer Products FFPD100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Franke Consumer Products FFPD100.
However, one of the most important roles played by the user manual is to help in solving problems with Franke Consumer Products FFPD100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Franke Consumer Products FFPD100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
