Instruction/ maintenance manual of the product FL 86.1V.STD Foster
Go to page of 5
Foster spa via M.S. Ottone, 18/20 42041 Brescello (RE) - Italy tel. +39.0522.687425 - tel. Servizio Assistenza +39.0522.684450 fax +39.0522.686019 - fax Servizio Ricambi +39.0522.962166 e-mail: service@fosterspa.com www .fosterspa.com IN STRU CTIONS FOR INSTALLA TION AND MA I N TENANCE Stainless steel sinks cod.
Istructions for the installation, use and maintenance of kitchen stainless steel sinks Sinks’ material: austenitic stainless steel AISI 304 - 18/10 UNI EN 13310:2004 (kitchen sinks for domestic use,.
After having positioned the sink on the worktop, fix it by tightening the screws of the brackets which are provided (the screws must be tightened just enough to have the brackets clamp down on the worktop). Afterwards, remove the excess gasket with a cutter .
Undermount installation For the undermount sinks, proceed as for the normal built-in sinks. Make a cut-out on the worktop following the template and/or instructions provided with the sink. Before installing the sink, seal with silicone. T ighten the brackets.
' P T U F S via M.S. Ottone, n. 18/20 - 42041 Brescello (RE) - Italia CARE and MAINTENANCE The Foster collections are the result of a huge experience, and a careful development to meet at best the necessities of the users’, so as to obtain a high-quality product.
An important point after buying a device Foster FL 86.1V.STD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Foster FL 86.1V.STD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Foster FL 86.1V.STD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Foster FL 86.1V.STD you will learn all the available features of the product, as well as information on its operation. The information that you get Foster FL 86.1V.STD will certainly help you make a decision on the purchase.
If you already are a holder of Foster FL 86.1V.STD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Foster FL 86.1V.STD.
However, one of the most important roles played by the user manual is to help in solving problems with Foster FL 86.1V.STD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Foster FL 86.1V.STD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
