Instruction/ maintenance manual of the product Mustang (2014) Ford
Go to page of 461
ER3J 19A321 AA | February 201 4 | Third P rinting | Owner’s Manual | Mustang | Litho in U.S.A. 2014 MUS T ANG Owner ’ s Manual 2014 MUS T ANG Owner ’ s Manual for downer .
Introduction 9 Child Safety 17 Child seat positioning ................................... 1 9 Booster seats ......................................... 2 1 Installing child seats .................................... 2 4 Safety Belts 33 Fastening the safety belts .
Locks 65 Locking and unlocking .................................. 6 5 Interior luggage compartment release ....................... 6 9 Security 70 SecuriLock® passive anti-theft system ....................... 7 0 Anti-theft system ...................
Instrument Cluster 92 Gauges ............................................. 9 2 W arning lamps and indicators ............................. 9 4 Audible warnings and indicators ........................... 9 8 Information Displays 99 C o n t r o l s ....
Fuel and Refueling 155 Fuel quality ......................................... 1 5 6 Running out of fuel .................................... 1 5 7 R e f u e l i n g ........................................... 1 5 9 Fuel consumption ...................
T owing 197 T r a i l e rt o w i n g ........................................ 1 9 7 W recker towing ...................................... 2 0 1 Recreational towing ................................... 2 0 2 Convertible T op (If Equipped) 203 Driving Hints 208 Economical driving .
Automatic transmission fluid check ........................ 2 4 2 Brake fluid check ..................................... 2 4 3 W asher fluid check .................................... 2 4 4 B a t t e r y ............................................ 2 4 4 Checking the wiper blades .
Capacities and Specifications 300 Engine specifications .................................. 3 0 0 Engine drivebelt ...................................... 3 0 0 Part numbers ........................................ 3 0 6 V ehicle identification number .
Appendices 426 Navigation end user license agreement ...................... 4 3 3 Scheduled Maintenance 438 Normal scheduled maintenance and log ..................... 4 4 3 Index 455 The information contained in this publication was correct at the time of going to print.
ABOUT THIS MANUAL Thank you for choosing Ford. W e recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
SYMBOL GLOSSAR Y W ARNING: Y ou risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol.
Symbol Description Symbol Description Symbol Description Heated rear window Interior luggage compartment release Jack Lighting control Low tire pressure warning Maintain correct fluid level Panic alar.
DA T A RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems.
normal driving conditions and no personal data or information (e.g., name, gender , age, and crash location) is recorded (see limitations regarding 911 Assist and T raffic, Directions and Information privacy below).
CALIFORNIA PROPOSITION 65 W ARNING: Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Collision Repairs W e hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity , corrosion protection and dent resistance.
MOBILE COMMUNICA TIONS EQUIPMENT Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs.
GENERAL INFORMA TION See the following sections for directions on how to properly use safety restraints for children. W ARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle.
Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger). Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat).
CHILD SEA T POSITIONING W ARNING: Airbags can kill or injure a child in a child seat. Never place a rear -facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all the way back.
W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. W ARNING: T o avoid risk of injury , do not leave children, unreliable adults, or pets unattended in your vehicle.
BOOSTER SEA TS W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
T ypes of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’ s head (as measured at the tops of the ears) above the top of the seat.
Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder .
INST ALLING CHILD SEA TS Child Seats Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). Using Lap and Shoulder Belts W ARNING: Airbags can kill or injure a child in a child seat.
• Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed in the upright position.
3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer’ s instructions.
8. Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt.
Using Lower Anchors and T ethers for CHildren (LA TCH) W ARNING: Never attach two child safety seats to the same anchor . In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
Y our vehicle has LA TCH lower anchors for child seat installation at the seating positions marked with the child seat symbol. The LA TCH anchors are located at the rear section of the rear seat between the cushion and seat back below the symbols as shown.
The tether strap anchors in your vehicle are in the following positions (shown from top view): Perform the following steps to attach a child safety seat to the tether anchor: For coupe: 1. Route the tether strap over the top of the head restraint. 2. Locate the correct anchor for the selected seating position.
For convertible: 1. Route the child safety seat tether strap over the top of the head restraint. The tether anchors are located rearward of the seat back in the convertible top sling. Note: For easier access, attach the tether with the convertible top up.
2. Access tether anchors located behind the seat back under the vinyl tag marked with the child tether anchor symbol. 3. Clip the tether strap to the anchor as shown. If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a crash.
PRINCIPLES OF OPERA TION W ARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips W ARNING: T o reduce the risk of injury , make sure children sit where they can be properly restrained. W ARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving.
W ARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. W ARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child.
The safety belt pretensioners are designed to activate in frontal, near -frontal and side crashes. The safety belt pretensioners at the front seating positions are designed to tighten the safety belts firmly against the occupant’ s body when activated.
2. T o unfasten, press the release button and remove the tongue from the buckle. Using Safety Belts During Pregnancy W ARNING: Always ride and drive with your seatback upright and the safety belt properly fastened. The lap portion of the safety belt should fit snug and be positioned low across the hips.
W ARNING: The belt and retractor assembly must be replaced if the safety belt assembly automatic locking retractor feature or any other safety belt function is not operating properly when checked by an authorized dealer . Failure to replace the belt and retractor assembly could increase the risk of injury in crashes.
How to Use the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
Conditions of Operation If... Then... The driver safety belt is not buckled before the ignition switch is turned to the on position... The safety belt warning light illuminates 1-2 minutes and the warning chime sounds 4-8 seconds. The driver safety belt is buckled while the indicator light is illuminated and the warning chime is sounding.
If... Then... The driver and front passenger safety belts are buckled before the ignition switch is turned to the on position or less than 1-2 minutes have elapsed since the ignition switch has been turned to on... The Belt-Minder feature will not activate.
Note: If you are using MyKey®, the Belt-Minder cannot be disabled. Also, if the Belt-Minder has been previously disabled, it will be re-enabled during the use of MyKey®. See the MyKey® chapter . Read Step s1-4t horoughly before proceeding with the programming procedure.
CHILD RESTRAINT AND SAFETY BEL T MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodically to make sure they work properly and are not damaged. Inspect the vehicle and child seat safety belts to make sure there are no nicks, tears or cuts.
PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries.
PRINCIPLES OF OPERA TION W ARNING: Airbags do not inflate slowly or gently , and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module.
W ARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately . If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.
DRIVER AND P ASSENGER AIRBAGS W ARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury .
Proper Driver and Front Passenger Seating Adjustment W ARNING: The National Highway T raffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’ s chest and the driver airbag module. Failure to follow this could seriously increase the risk of injury or death.
FRONT P ASSENGER SENSING SYSTEM W ARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position.
The front passenger sensing system uses a passenger airbag off or pass airbag off indicator which will illuminate and stay lit to remind you that the front passenger frontal airbag is disabled. The indicator lamp is located on the front edge of the map lamps.
• Restart your vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger’ s frontal airbag. • If the indicator lamp remains lit even after this, the person should be advised to ride in the rear seat.
system. The person in the front passenger seat may appear heavier or lighter due to the conditions described in the list above. Make sure the front passenger sensing system is operating properly . See Crash Sensors and Airbag Indicator later in this chapter .
W ARNING: Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the side airbags and increase the risk of injury in an accident. W ARNING: Do not lean your head on the door . The side airbag could injure you as it deploys from the side of the seatback.
The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag T echnical W orking Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags.
The fact that the safety belt pretensioners or airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather , it means the restraints control module determined the accident conditions (such as crash severity , belt usage) were not appropriate to activate these safety devices.
GENERAL INFORMA TION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditio.
power door lock, remote control or manually lock the passenger door to ensure the vehicle is properly secured. Note: Y our vehicle’ s keys were issued with a security label that provides important vehicle key cut information. Keep the label in a safe place for future reference.
Integrated Keyhead Transmitter 1. T wist a thin coin in the slot near the key ring to remove the battery cover (1). 2. Carefully peel up the rubber gasket (2) from the transmitter if it does not come off with the battery cover . 3. Remove the old battery (3).
PRINCIPLES OF OPERA TION MyKey allows you to program keys with restricted driving modes to promote good driving habits. Y ou can use all but one of the keys programmed to your vehicle with these restricted modes. Any keys that have not been programmed are referred to as administrator keys or admin keys.
• Audio system maximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. • Always on setting. When this is selected, you will not be able to turn off AdvanceT rac (if your vehicle is equipped with this feature).
Programming/Changing Optional Settings Use the information display to access your configurable MyKey settings. For T ype 1 information display settings: 1. Switch the ignition on using an admin key . 2. Press SETUP until RESET FOR MYKEY SETTINGS is displayed.
For T ype 2 information display settings: 1. Access main menu of your information display and select Settings , then MyKey . 2. Scroll to Clear All and press the OK button.
When you start your vehicle with a Ford-approved aftermarket remote start system, the system stalls the vehicle after you open the door or shift the vehicle into gear . This is intentional. When you restart your vehicle, it reads your real key’ s status instead of the remote start system’ s status.
As an added precaution, owners may want to program the remote start system as a MyKey , if the MyKey driver uses the remote start fob. That way , when the MyKey driver starts the vehicle with the remote start system, the MyKey restrictions will be remain active.
Condition Potential causes I cannot clear the MyKeys. • The key used to start the vehicle does not have admin privileges. • No MyKeys are created. See Creating a MyKey . • The vehicle has been started using a remote start system that is not programmed with admin privileges.
LOCKING AND UNLOCKING Y ou can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A. Unlock B. Lock Remote Control Y ou can use the remote control anytime your vehicle is not running.
Opening the Trunk Press the button twice within three seconds to open the trunk. Make sure to close and latch the trunk before driving your vehicle. An unlatched trunk may cause objects to fall out or block your view . Smart Locks This feature helps prevent you from locking yourself out of your vehicle if your key is still in the ignition.
Note: The doors will not autounlock if the vehicle has been electronically locked before the driver door is opened. Enabling or Disabling Autolock and Autounlock Note: The autolock and autounlock features can be activated or deactivated independently of each other: • through your authorized dealer • by using the information display .
TRUNK RELEASE The remote trunk release button is located on the center console. Press the button to unlatch the trunk. Interior T runk Control Lockout (Convertible V ehicles Only) This feature disables the interior trunk control. It helps prevent unauthorized access to the trunk when the convertible top is open.
INTERIOR LUGGAGE COMP ARTMENT RELEASE W ARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’ s reach. Unsupervised children could lock themselves in the trunk and risk injury . Children should be taught not to play in vehicles.
SECURILOCK® P ASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection.
Automatic Disarming Y our vehicle disarms when you switch the ignition on with a coded key . Replacement Keys Note: Y our vehicle comes with two integrated keyhead transmitters. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control.
5. T urn the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds. 6. T urn the ignition off and remove the second previously programmed coded key from the ignition.
Full Monitor Mode T o monitor the following: • Doors • Hood • T runk • Movement inside the vehicle (for convertible models, top must be fully closed) • Change in vehicle inclination (such as unwanted towing) Lock the vehicle using the remote control or the power door lock control with the accompanying door open and then close all doors.
Each door , the hood or the trunk is armed individually , and if any are open, they must be closed for the system to enter the 20 second countdown. The turn signal lamps will flash once when all doors, the hood and the trunk are closed indicating the vehicle is locked and entering the 20 second countdown.
ADJUSTING THE STEERING WHEEL W ARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter . 1. Unlock the steering column.
Press the media button repeatedly to scroll through available audio modes. Press the seek buttons to select the next or previous stored preset or track. Press and hold to select the next or previous frequency or seek through a track. VOICE CONTROL (IF EQUIPPED) A.
INFORMA TION DISPLA Y CONTROL T ype 1 T ype 2 See the Information Displays chapter . OK Steering Wheel 77 2014 05+ Mustang (197) Owners Guide gf, 3rd Printing, January 2014 USA (fus).
WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure you switch off the windshield wipers before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
• A brief press causes a single wipe without washer fluid. • A quick press and hold causes the wipers to swipe three times with washer fluid. • A long press and hold will activate the wipers and washer fluid for up to 10 seconds. A wipe will occur a few seconds after washing to clear any remaining washer fluid.
LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams • Push the lever toward the instrument panel to switch on the high beams. • Pull the lever toward you to switch of the high beams.
AUTOLAMPS (If equipped) W ARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually . Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature.
HEADLAMP EXIT DELA Y Y ou can set the delay time to keep the headlamps on for up to three minutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6 must be done within 10 seconds): 1. T urn the ignition off.
3. Make sure the transmission selector lever is not in position P . 4. Make sure the parking brake is disengaged. FRONT FOG LAMPS The fog lamps can be turned on when the lighting control is pulled toward you and in the headlamps, parking lamps or autolamps positions.
INTERIOR LAMPS Dome/Map lamps The dome lamp lights when: • Any door is opened. • Any of the remote entry controls are pressed and the ignition is off. • The instrument panel dimmer switch is rotated up, past the detent, until the courtesy lamps come on.
POWER WINDOWS W ARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. W ARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Bounce-Back The window will stop automatically while closing and reverse some distance if there is an obstacle in the way . Overriding the Bounce-Back Feature W ARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle.
Manual Override The rear quarter window switch will not operate when: • the convertible top is moving • the convertible top is not completely up or down. The rear quarter windows can be manually raised if the switch does not operate when the convertible top is completely up or down.
Pony Projection Lights (If Equipped) Note: Moisture, frost and ice build-up (or other types of contamination) on the surface of the light lens can cause some non-permanent distortion or reduced brightness of the image. Do not use abrasive materials to clean the lens.
The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image will transition from the main mirror and begin to appear in the blind spot mirror as the vehicle approaches (B).
SUN VISORS Slide-On-Rod Rotate the visor toward the side window and extend it rearward for extra sunlight coverage. Retract the visor before moving it back toward the windshield and storing it. Illuminated Visor V anity Mirror Lift the cover to switch on the lamp.
Flexible Visor Storage System The system can accommodate various storage accessories. A sunglasses clip and multi-function clip are provided. T o attach one of the accessories, do the following: 1.
GAUGES T ype 1 Cluster shown in standard measure. Metric similar . A. Speedometer B. Fuel gauge C. Engine coolant temperature gauge D. T achometer E. Information display . See Information displays for more information. Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on).
W ARNING: Never remove the coolant reservoir cap while the engine is running or hot. T ype 2 Cluster shown in standard measure. Metric similar . A. Speedometer B. Information display . See the Information Displays chapter for more information. C. T achometer D.
Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on). The fuel gauge may vary slightly when the vehicle is in motion or on a grade. The fuel icon and arrow indicates which side of the vehicle the fuel filler door is located.
Brake System W arning Light T o confirm the brake system warning light is functional, it will momentarily illuminate when the ignition is turned to the on position when the engine is not running, or in a position between on and start, or by applying the parking brake when the ignition is turned to the on position.
Engine Coolant T emperature Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as possible, switch off the engine and let it cool. High Beams Illuminates when the high beam headlamps are on. Low Fuel Illuminates when the fuel level in the fuel tank is at or near empty .
Service Engine Soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.
Stability Control System Off Illuminates when AdvanceT rac®/T raction control has been disabled by the driver . T urn Signal Illuminates when the left or right turn signal or the hazard warning flasher is turned on. If the indicators stay on or flash faster , check for a burned out bulb.
GENERAL INFORMA TION W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Y our primary responsibility is the safe operation of the vehicle.
MYKEY MILES (km) For more information, see the MyKey® chapter . MILES (km) TO E This displays an estimate of approximately how far you can drive with the fuel remaining in your tank under normal driving conditions. Remember to turn the ignition off when refueling to allow this feature to correctly detect the added fuel.
RESET FOR SYSTEM CHECK When this message appears, press the RESET button and the information display will begin to cycle through the following systems and provide a status of the item if needed. 1. XXX% OIL LIFE 2. CHARGING SYSTEM 3. DOORS ST A TUS 4.
• COMFOR T– Slightly less effort required for steering with less road force felt through the steering wheel. Note: When AdvanceT rac® sport mode is on or when AdvanceT rac® and traction control are off, the steering feel will be locked in sport mode.
2. Press RESET to scroll through the following color options: • ICE BLUE • BLUE • WHITE • ORANGE • GREEN • RED • PURPLE UNITS Displays the current units English or Metric. Press RESET to change from English to Metric. AUTOLAMP (SEC) This feature keeps your headlights on for up to three minutes after the ignition is switched off.
Information Messages See Information Messages later in this chapter for more information. Information Display Controls (T ype 2) • Press the up and down arrow buttons to scroll through and highlight the options within a menu. • Press the right arrow button to enter a sub-menu.
†Gauge Mode Gauges Detail Air/Fuel Ratio Virtual gauge shown V acuum inHG / Boost psi (Shelby® GT500®) Virtual gauge shown Cyl Head Virtual gauge shown Inlet Air Virtual gauge shown Oil Press.
†T rack Apps Accelerometer Acceleration timer Brake Performance Dashboard Screen (Shelby® GT500®) Launch Control (Shelby® GT500®) Off/On / RPM Setting View/Clear Results †See T rack apps later in this section for more information. Note: T rack Apps is not intended to be used on public roadways.
Settings V ehicle Dampers (Shelby® GT500®) Sport / Normal Steering Feel Standard Sport Sport Locked: This will display when AdvanceT rac® sport mode is on or when AdvanceT rac® and traction control are off. The steering feel will be locked in sport mode and steering feel will not be selectable.
Settings †MyColor (if equipped) Gauge Color Ice Blue, White, Green, Purple, Blue, Orange, Red, MyColor 1, 2, 3 Halo Halo Light On/Off Halo Color Ice Blue, White, Green, Purple, Blue, Orange, Red, My.
Settings *Language English, Español, Français Units English or Metric System Reset Hold OK to Reset System to Factory Default †The instrument cluster gauges are backlit white when the headlamps are off. When the headlamps are on, you can select one of the preset colors or MyColor 1, 2, 3 for the nighttime gauge backlighting.
TRIP COMPUTER (T rip A and B) Resetting or Pausing the Trip Computer • Press OK to pause the T rip A or B screen, press again to un-pause. • Press and hold OK to reset the currently displayed trip information. Tri p Ti me Registers the time of individual journeys.
CYLINDER HEAD TEMP (IF EQUIPPED) Displays the engine’ s cylinder head temperature. INLET AIR TEMP Displays the temperature of the air in the cold air inlet tube. OIL TEMP Displays the engine oil temperature. If the temperature rises to the red area, stop in a safe place and let the vehicle cool.
VOL TS Displays the vehicle’ s battery voltage. If the voltage is consistently too high or very low , see your authorized dealer . TRACK APPS (IF EQUIPPED) W ARNING: T rack Apps is for track use only . Remember that even advanced technology cannot defy the laws of physics.
• The red dot will move toward the area of acceleration/deceleration. When accelerating/decelerating left, the red dot will move to the right on the accelerometer . This is considered LEFT acceleration/deceleration. When accelerating/decelerating right, the red dot will move to the left on the accelerometer .
INFORMA TION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may be abbreviated or shortened depending upon which cluster type you have.
Battery and Charging System Messages Action / Description CHECK CHARGING SYSTEM Displayed when the charging system needs servicing. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible.
.
MyKey® Messages Action / Description TOP SPEED MYKEY SETTING Displayed when a MyKey® is in use and the MyKey speed limit is on and the vehicle speed is 80 mph (130 km/h). SPEED LIMITED TO 80 MPH Displayed when starting the vehicle and MyKey® is in use and the MyKey speed limit is on.
ELECTRONIC COMP ASS The compass heading displays in the center -integrated display . Note: Driving near large buildings, bridges, power lines and powerful broadcast antenna may affect the compass reading. Magnetic or metallic objects placed in, on or near your vehicle may also affect compass accuracy .
Compass Calibration Adjustment Most geographic areas (zones) have a magnetic north compass point that varies slightly from the northerly direction on maps. This variation is four degrees between adjacent zones and becomes noticeable as your vehicle crosses multiple zones.
MANUAL CLIMA TE CONTROL A. Defrost: Press the button to distribute air to the windshield vents and de-mister . Air distribution to instrument panel and footwell vents turn off. Y ou can use this setting to defog and clear the windshield of a thin covering of ice.
F. MAX A/C: T urn the temperature control dial all the way past the full cool position to maximize cooling. Recirculated air flows through the instrument panel vents, air conditioning automatically turns on, and the fan automatically adjusts to the highest speed.
AUTOMA TIC CLIMA TE CONTROL Note: T o use the touchscreen controls, see the T ouchscreen climate controls in the Navigation System chapter . A. CLIMA TE: Control the system through the touchscreen display . See T ouchscreen functions later in this section.
F. Recirculated air: Press the button to switch between outside air and recirculated air . When you select recirculated air , the air currently in the passenger compartment recirculates. This may reduce the time needed to cool the interior (when used with A/C) and may reduce unwanted odors from entering your vehicle.
GENERAL OPERA TING TIPS General Hints Note: Prolonged use of recirculated air may cause the windows to fog up. Note: Y ou may feel a small amount of air from the footwell air vents regardless of the air distribution setting.
Heating the Interior Quickly V ehicles with manual climate control V ehicles with automatic climate control 1 Adjust the fan speed to the highest speed setting. Press the AUTO button. 2 Adjust the temperature control to the highest setting. Adjust the temperature control to the desired setting.
Recommended Settings for Cooling V ehicles with manual climate control V ehicles with automatic climate control 1 Adjust the fan speed to the center setting. Press the AUTO button. 2 Adjust the temperature control to the midway point of the cold settings.
HEA TED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The vehicle must be running to use this feature. Press the control to clear the rear window of thin ice and fog. Press the control again within 15 minutes to switch it off. It turns off automatically after approximately 15 minutes, or when you switch off the ignition.
CABIN AIR FIL TER Note: Make sure you have a cabin air filter installed at all times. This prevents foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system.
SITTING IN THE CORRECT POSITION W ARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash.
• Position the shoulder strap of the safety belt over the center of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.
• Raise: Pull up on the head restraint (A). • Lower: Press and hold the guide sleeve adjust and release button (C) and push down on the head restraint (A).
Press the rotation button to rotate the head restraint forward in order to improve rear vision when there are no rear seat occupants. Properly adjust the head restraint to an upright driving or riding position by lifting up on the head restraint until it locks into its original position.
Moving the seats backward and forward Recline adjustment W ARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips.
POWER SEA TS (IF EQUIPPED) W ARNING: Never adjust the driver seat or seat back when the vehicle is moving. W ARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seatback. The power seat control is located on the outboard side of the seat.
HEA TED SEA TS (IF EQUIPPED) W ARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater .
REAR SEA TS Rear Seat Entry and Exit Use the seatback release to fold the back of the front seat forward for rear seat access. This release handle is located on the upper back of the front seat. The seatback locks automatically when returned to the normal position.
T o lower the seatback(s) from inside the vehicle, be sure the head restraint is in the upright position, pull the strap to release the seatback and then fold the seatback down. When raising the seatback(s), make sure you hear the seat latch into place.
UNIVERSAL GARAGE DOOR OPENER The appearance of your vehicle’ s universal garage door opener will vary according to your option package. Before programing, make sure you identify which transmitter you have by comparing it to the graphics below .
Note: W e recommend that upon the sale or lease termination of your vehicle, you erase the programmed function buttons for security reasons. See Erasing the Function Button Codes later in this section. Note: Y ou can program a maximum of three devices.
1. Switch the ignition on. 2. Press and hold the outer two buttons for 1–2 seconds, then release. Note: Y ou may need a ladder to reach the unit and you may need to remove the cover or lamp lens. Note: If you cannot locate the learn button, see the Owner’ s Manual for your garage door opener or call the toll-free help line at 1-866-572-2728.
Fixed Code Programming Note: It may be helpful to have another person assist you in programming the transmitter . T o program units with fixed code DIP switches, you will need the garage door hand-held transmitter , paper and a pen or pencil. 1. Switch the ignition on.
The LED lamp above the selected button will illuminate to confirm that the system is responding to the button command. Erasing the Function Button Codes Note: Y ou cannot erase individual buttons. 1. Press and hold the outer two function buttons simultaneously for approximately 20 seconds until the LED lamps above the buttons flash rapidly .
Note: Y ou can program a maximum of three devices. T o change or replace any of the three devices after it has been initially programmed, you must first erase the current settings.
If the indicator light flashes rapidly for two seconds and then turns to a constant light, the HomeLink button is not programmed yet. Do the following: Press and hold the HomeLink button while you press and release the hand-held transmitter button every two seconds.
Reprogramming a single button T o program a device to a previously trained button, follow these steps: 1. Press and hold the desired button. Do NOT release the button. 2. The indicator light will begin to flash after 20 seconds. W ithout releasing the button, follow Step 1 in the Programming section.
Note: the Genie transmitter will transmit for up to 30 seconds. If HomeLink does not program within 30 seconds the Genie transmitter will need to be pressed again. If the Genie transmitter LED displays green and red, release the button until the LED turns off before pressing the button again.
Clearing a HomeLink device T o erase programming from the three HomeLink buttons, press and hold the two outer HomeLink buttons until the indicator light begins to flash. The LED will begin flashing in 10 to 20 seconds, at which time both buttons should be released.
AUXILIAR Y POWER POINTS W ARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty , and can result in fire or serious injury . Note: If used when the engine is not running, the battery will discharge.
CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. A vailable console features include: • Cupholders in the front of the console (pull the door open to access).
GENERAL INFORMA TION W ARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. W ARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover .
IGNITION SWITCH A. Off: The ignition is off. Note: When you switch the ignition off and leave your vehicle, do not leave your key in the ignition. This could cause your vehicle battery to lose charge. B. Accessory: Allows the electrical accessories such as the radio to operate while the engine is not running.
1. Fully press the brake pedal. If your vehicle is equipped with a manual transmission, fully press the clutch pedal also. 2. T urn the key to the start position to start the engine. Release the key when the engine starts. Note: The engine may continue cranking for up to 15 seconds or until it starts.
Guarding Against Exhaust Fumes W ARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately . Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. T ake precautions to avoid its dangerous effects.
• Make sure that when in operation, the extension cord plug and the heater cord plug connections are free and clear of water . This could cause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear of combustibles. • Make sure the heater , heater cord and extension cord are firmly connected.
SAFETY PRECAUTIONS W ARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. W ARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
• A void getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury . • Fuels can also be harmful if absorbed through the skin.
Octane Recommendations • 3.7L V6 engine Regular unleaded gasoline with a pump (R+M)/2 octane rating of 87 is recommended. Some stations offer fuels posted as Regular with an octane rating below 87, particularly in high altitude areas. Do not use fuels with octane posted on pump below 87.
Refilling with a Portable Fuel Container W ARNING: Do not insert the nozzle of a portable fuel container or aftermarket funnel into the capless fuel system. This could damage the fuel system and its seal, and may cause fuel to run onto the ground instead of filling the tank, which could result in serious personal injury .
REFUELING W ARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. T o help avoid injuries to you and others: • Read and follow all the instructions on the pump island. • T urn off your engine when you are refueling. • Do not smoke if you are near fuel or refueling your vehicle.
2. T o open the fuel filler door , press the center of the rear edge and then release. 3. Slowly insert the fuel filler nozzle fully into the fuel system, and leave the nozzle fully inserted to open both doors until you are done pumping. Hold handle higher during insertion for easier access.
At the next opportunity , do the following: 1. Safely pull off the road. 2. T urn off the engine. 3. Open the fuel filler door and remove any visible debris from the fuel fill opening. 4. Insert either the fuel fill nozzle or the fuel fill funnel provided with the vehicle several times to dislodge any debris and allow the inlet to close properly .
Calculating Fuel Economy Do not measure fuel economy during the first 1000 miles (1600 kilometers) of driving (this is your engine’ s break-in period); a more accurate measurement is obtained after 2000 miles–3000 miles (3200 kilometers–4800 kilometers).
Y our vehicle is equipped with various emission control components and a catalytic converter which will enable your vehicle to comply with applicable exhaust emission standards. T o make sure that the catalytic converter and other emission control components continue to work properly: • Use only the specified fuel listed.
On-board Diagnostics (OBD-II) Y our vehicle is equipped with a computer that monitors the engine’ s emission control system. This system is commonly known as the on-board diagnostics system (OBD-II). The OBD-II system protects the environment by ensuring that your vehicle continues to meet government emission standards.
If the service engine soon indicator is on or the bulb does not work, the vehicle may need to be serviced. See On-board Diagnostics (OBD-II) in this chapter .
AUTOMA TIC TRANSMISSION (IF EQUIPPED) W ARNING: Always set the parking brake fully and make sure the gearshift is latched in position P . T urn the ignition off and remove the key whenever you leave your vehicle. Y our vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating.
Position S Moving the gearshift lever to position: • Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking.
Note: Some models have a blink feature (if equipped). If manually selecting a gear that is out of the current vehicle speed range, the vehicle will not make the requested shift and will blink the current gear . Brake-shift interlock W ARNING: Do not drive your vehicle until you verify that the brakelamps are working.
3. Lift the center console upward to access the base of the gear shifter assembly and locate the brakeshift interlock override lever . 4. Press and hold the lever forward while pulling the gearshift lever out of the P (Park) position and into the N (Neutral) position.
MANUAL TRANSMISSION (IF EQUIPPED) Using the Clutch Manual transmission vehicles have a starter interlock that prevents starting the engine unless the clutch pedal is fully pressed. T o start the vehicle: 1. Make sure the parking brake is fully set. 2.
Recommended Shift Speeds Note: Do not downshift into position 1 when your vehicle is moving faster than 15 mph (24 km/h). This may damage the clutch or transmission.
Reverse Note: The gearshift lever can only be moved to position R by pushing the knob down before shifting to reverse. This is a lockout feature which protects the transmission from accidentally engaging position R when intending to select position 1.
AXLE INFORMA TION T raction-Lok™ Axle (If Equipped) This axle provides added traction on slippery surfaces, particularly when one wheel is on a poor traction surface. Under normal conditions, the T raction-Lok™ axle functions like a standard rear axle.
This feature makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When this feature is active, the vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal.
5. Rotate the steering wheel at least one full turn to the right and return the steering wheel to the original starting position. 6. Rotate the steering wheel at least one full turn to the left and return the steering wheel to the original starting position.
GENERAL INFORMA TION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out.
HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travel further . Maintain pressure on the brake pedal.
PRINCIPLES OF OPERA TION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time.
PRINCIPLES OF OPERA TION W ARNING: V ehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handling characteristics of your vehicle and may adversely affect the performance of the AdvanceT rac® system.
A V ehicle without AdvanceT rac® skidding off its intended route. B V ehicle with AdvanceT rac® maintaining control on a slippery surface. USING ADV ANCETRAC® The system automatically activates when you start your engine.
AdvanceT rac Features Button functions Mode Icon status ESC TCS Default at start-up — On during bulb check Enabled Enabled Button pressed momentarily T raction control off On Enabled Disabled Button.
SENSING SYSTEM (IF EQUIPPED) W ARNING: T o help avoid personal injury , please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds.
warning message appears in the information display and does not allow the driver to switch the faulted system on. Using the Rear Sensing System The rear sensors are only active when the transmission is in R .A st h e vehicle moves closer to the obstacle, the rate of the audible warning increases.
W ARNING: Back up as slow as possible since higher speeds might limit your reaction time to stop the vehicle. W ARNING: Use caution when using the rear video camera and the trunk is ajar . If the trunk is ajar , the camera will be out of position and the video image may be incorrect.
Note: The camera may not operate correctly under the following conditions: • Nighttime or dark areas if one or both reverse lamps are not operating. • The camera’ s view is obstructed by mud, water or debris. Clean the lens with a soft, lint-free cloth and non-abrasive cleaner .
PRINCIPLES OF OPERA TION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL W ARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery .
Setting a Speed 1. Accelerate to the desired speed. 2. Press and release SET+ . 3. T ake your foot off the accelerator pedal. The indicator will change colors in the instrument cluster . Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change.
STEERING Electric Power Steering W ARNING: The electric power steering system has diagnostic checks that continuously monitor the system to ensure proper operation. When a system error is detected a steering message will appear in the information display .
Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steering seem to wander/pull.
LOAD LIMIT V ehicle Loading – With and Without a T railer This section will guide you in the proper loading of your vehicle and/or trailer , to keep your loaded vehicle weight within its design rating capability , with or without a trailer . Properly loading your vehicle will provide maximum return of vehicle design performance.
W ARNING: The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available.
Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload.
GVWR (Gross V ehicle W eight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo).
W ARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury .
W ARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury . Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.
• Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity . Y ou and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years. Measuring the inside of the vehicle with the rear seat folded down, you have room for 12-100 lb.
TOWING A TRAILER W ARNING: Do not exceed the GVWR or the GA WR specified on the certification label. W ARNING: T owing trailers beyond the maximum recommended gross trailer weight exceeds the limit of.
RECOMMENDED TOWING WEIGHTS Note: Do not tow with the Shelby GT500 model. It cannot tow a trailer . Note: Do not exceed the trailer weight for your vehicle configuration listed in the chart below . Note: Make sure to take into consideration trailer frontal area.
Hitches Do not use a hitch that either clamps onto the bumper or attaches to the axle. Distribute the trailer load so 10-15% of the total trailer weight is on the tongue. Safety Chains Note: Never attach safety chains to the bumper . Always connect the safety chains to the hook retainers of your vehicle hitch.
When T owing a T railer • Do not drive faster than 70 mph (113 km/h) during the first 500 miles (800 kilometers). • Do not make full-throttle starts. • Check your hitch, electrical connections and trailer wheel lug nuts thoroughly after you have traveled 50 miles (80 kilometers).
Exceeding these limits may allow water to enter vehicle components: • Causing internal damage to the components. • Affecting driveability , emissions, and reliability .
The rear wheels (drive wheels) must be on a tow dolly when towing your vehicle from the front using wheel lift equipment. This prevents damage to the transmission. The front wheels should be on a tow dolly when towing your vehicle from the rear using wheel lift equipment.
OPENING THE CONVERTIBLE TOP Note: Do not store articles behind rear seat. Articles stored in the convertible top stowage compartment may break the rear glass window when the top is opened. Note: Opening the convertible top when the top material is wet may cause mold or mildew .
4. Press and hold the convertible top switch on the overhead console until the windows are completely down and the top is completely stored. USING THE BOOT Installing the Boot W ARNING: Always secure the retaining clips and boot straps on the vehicle or the boot may come loose while driving.
1. Install the boot on the vehicle by hooking the boot retaining clips on the back panel. 2. Install the boot on the right side tucking in the front part of the boot in the quarter panel and hooking the retaining clip on the side.
3. Fold the right side inward and secure the boot with the strap. Stow the boot in the trunk. CLOSING THE CONVERTIBLE TOP Note: The convertible top will not operate unless the vehicle is stationary or traveling under 3 mph (5 kmh).
4. Pull down on the drivers latch handle and rotate it all the way forward into the windshield header . 5. Press the latch handle up into the stowed position to secure the latch. 6. Pull down on the passengers side latch handle and rotate it all the way forward into the windshield header .
BREAKING-IN Y ou need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. A void driving too fast during the first 1000 miles (1600 kilometers). V ary your speed frequently and change up through the gears early .
• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost for every 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment.
FLOOR MA TS W ARNING: Always use floor mats that are designed to fit the foot well of your vehicle, leaving the pedal area unobstructed, and which can be firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
ROADSIDE ASSIST ANCE V ehicles Sold in the United States: Getting Roadside Assistance T o fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary Roadside Assistance program. This program is separate from the New V ehicle Limited W arranty .
V ehicles Sold in the United States: Using Roadside Assistance Complete the roadside assistance identification card and place it in your wallet for quick reference. This card is found in the owner’ s manual portfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, call 1-800-241-3673.
FUEL SHUTOFF W ARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury . Ford Motor Company recommends that the fuel system be inspected by an authorized dealer after any collision.
When the battery is disconnected or a new battery is installed, the automatic transmission must relearn its shift strategy . As a result, the transmission may exhibit a combination of firm and soft shifts. This operation is considered normal and will not affect function or durability of the transmission.
1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery . 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery . 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery .
Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery . Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface.
GETTING THE SERVICES YOU NEED W arranty repairs to your vehicle must be performed by an authorized dealer . While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction.
• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6K 1C8 T elephone 1-800-565-3673 (FORD) Online www .ford.
IN CALIFORNIA (U.S. ONL Y) California Civil Code Section 1793.2(d) requires that, if a manufacturer or its representative is unable to repair a motor vehicle to conform to the vehicle’ s applicable .
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONL Y) Y our satisfaction is important to Ford Motor Company and to your dealer . If a warranty concern has not been resolved using the three-s.
UTILIZING THE MEDIA TION or ARBITRA TION PROGRAM (CANADA ONL Y) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford .
If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. V irgin Islands, Central America, the Caribbean, and Israel, contact the nearest authorized dealer .
If your vehicle must be serviced while you are traveling or living in the Middle East, contact the nearest authorized dealer . If the authorized dealer cannot help you, contact: Ford Middle East Customer Relationship Center P .
Obtaining a French Owner ’ s Manual A French owner’ s manual can be obtained from your authorized dealer or by contacting Helm, Incorporated using the contact information listed previously in this section.
CHANGING A FUSE Fuses W ARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in your vehicle are not working, a fuse may have blown.
FUSE SPECIFICA TION CHART Power Distribution Box W ARNING: Always disconnect the battery before servicing high current fuses. W ARNING: T o reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.
Fuse or relay number Fuse amp rating Protected components 3 — Not used 4 30A* Blower motor relay 5 20A* Power point (body) 6 40A* Rear defroster relay 7 40A* Cooling fan relay 8 40A* Anti-lock brake.
Fuse or relay number Fuse amp rating Protected components 29 30A* Passenger front window 30 — Not used 31 30A* Passenger power seat 32 30A* Driver power seat 33 30A* Front amplifier (Shaker radio) 3.
Fuse or relay number Fuse amp rating Protected components 52 Full ISO relay Starter relay 53 Full ISO relay Rear defroster relay 54 Full ISO relay Front wiper relay 55 Full ISO relay Cooling fan relay.
Passenger Compartment Fuse Panel The fuse panel is located in the lower passenger side area behind the kick panel. Open the trim panel door and remove the fuse cover to access the fuses. Use the provided fuse puller tool to remove a fuse. It is located inside the fuse cover .
Fuse or relay number Fuse amp rating Protected components 6 20A T urn signals, Hazard flashers 7 10A Left low beam headlamp 8 10A Right low beam headlamp 9 15A Courtesy lamps 10 15A Switch illumination, Pony projection lights 11 10A Security module 12 7.
Fuse or relay number Fuse amp rating Protected components 32 10A Reverse parking aid (non-Shelby), V ehicle dynamics control module (Shelby only) 33 10A Not used (spare) 34 5A Electronic stability con.
GENERAL INFORMA TION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise.
OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood release handle located on the driver’ s side kick panel. 2. Go to the front of the vehicle and release the auxiliary latch that is located under the front center of the hood. 3. Lift the hood and secure it with the prop rod.
UNDER HOOD OVERVIEW 3.7L V6 Engine A. Battery B. Engine oil dipstick C. Engine oil filler cap D. Brake fluid reservoir E. Air filter assembly F . Engine coolant reservoir G.
5.0L V8 Engine A. Battery B. Engine oil filler cap C. Engine oil dipstick D. Brake fluid reservoir E. Air filter assembly F . Engine coolant reservoir G.
Engine Shield Some vehicles may be equipped with an aero-shield under the engine. Remove the front fasteners of the shield to gain access for service. This includes oil and filter changes. ENGINE OIL DIPSTICK A .–M I N B. – MAX ENGINE OIL CHECK Note: Check the level before starting the engine.
Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by the American Petroleum Institute (API).
Adding Engine Coolant W ARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly . Also, you can be burned if you spill coolant on hot engine parts. W ARNING: Do not put engine coolant in the windshield washer fluid container .
• Do not use alcohol, methanol, brine or any engine coolants mixed with alcohol or methanol antifreeze (coolant). Alcohol and other liquids can cause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant.
V ehicles driven year -round in non-extreme climates should use prediluted engine coolant for optimum cooling system and engine protection. What Y ou Should Know About Fail-Safe Cooling If the engine coolant supply is depleted, this feature allows the vehicle to be driven temporarily before incremental component damage is incurred.
2. Arrange for the vehicle to be taken to an authorized dealer . 3. If this is not possible, wait a short period for the engine to cool. 4. Check the coolant level and replenish if low .
Checking and Adding Manual T ransmission Fluid (if equipped) 1. Clean the filler plug. It is located on the passenger side of the transmission. 2. Remove the filler plug and inspect the fluid level. 3. For vehicles equipped with a V6 engine, the correct manual transmission fill level is at the lower edge of the filler hole.
W ASHER FLUID CHECK W ARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
W ARNING: Battery posts, terminals and related accessories contain lead and lead compounds. W ash hands after handling. Y our vehicle is equipped with a Motorcraft® maintenance-free battery which normally does not require additional water during its life of service.
When the battery is disconnected or a new battery installed, the transmission must relearn its adaptive strategy . As a result of this, the transmission may shift firmly . This operation is considered normal and will not affect function or durability of the transmission.
T o prolong the life of the wiper blades, it is highly recommended to scrape off the ice on the windshield before turning on the wipers. The layer of ice has many sharp edges and can damage the micro edge of the wiper rubber element.
V8 engine 1. Release the clamps that secure the air filter housing cover . 2. Remove the air filter element from the air filter housing. 3. W ipe the air filter housing and cover clean to remove any dirt or debris and to ensure good sealing. 4. Install a new air filter element.
• ( 1 )8f t( 2 . 4m ) • (2) Center height of lamp to ground • (3) 25 ft (7.6 m) • (4) Horizontal reference line 2. Measure the height from the center of your headlamp to the ground and mark an 8 ft (2.4 m) horizontal reference line on the vertical wall or screen at this height (a piece of masking tape works well).
CHANGING A BULB Lamp Assembly Condensation Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold.
4. Rotate the socket counterclockwise and remove from the lamp assembly . 5. Carefully pull the bulb straight out of socket. Install the new bulb in reverse order . Replacing Front Sidemarker Bulb 1. Make sure the headlamp control is in the off position.
Replacing Fog Lamp Bulbs (V6) (if equipped) 1. Make sure the headlamp control is in the off position and open the hood. 2. Remove the hex head screws attaching the underbody forward aeroshield. 3. Remove the underbody forward aeroshield to gain access to the fog lamp assembly .
Replacing Rear Sidemarker Lamp Bulbs 1. Make sure the headlamp switch is in the off position and locate the sidemarker on the rear bumper fascia. 2. Insert a flathead screwdriver between the rear of the sidemarker lens and the bumper fascia.
BULB SPECIFICA TION CHART Replacement bulbs are specified in the chart below . Headlamp bulbs must be marked with an authorized D.O.T . for North America and an E for Europe to ensure lamp performance, light brightness and pattern and safe visibility .
GENERAL INFORMA TION Y our Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following p.
• Note: Suntan lotions and insect repellents can damage any painted surface; if these substances come in contact with your vehicle, wash it off as soon as possible.
Convertible T op and Padded Molding For vinyl tops, wash with Motorcraft® Detail W ash. For cloth tops, wash with a high quality convertible top cleaner and protectant. • Do not use stiff bristle brushes or abrasive materials or cleaners. • Hot waxes applied by commercial car washes can affect the cleanability of vinyl material.
REP AIRING MINOR P AINT DAMAGE Y our authorized dealer has touch-up paint to match your vehicle’ s color . T ake your color code (printed on a sticker in the driver’ s door jamb) to an authorized dealer to make sure you get the correct color .
Premium Quality W indshield W asher Fluid in Canada. Be sure to replace wiper blades when they appear worn or do not function properly . • Do not use abrasives, as they may cause scratches. • Do not use fuel, kerosene, or paint thinner to clean any parts.
CLEANING THE INSTRUMENT P ANEL AND INSTRUMENT CLUSTER LENS W ARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system.
CLEANING LEA THER SEA TS (IF EQUIPPED) • Remove dust and loose dirt with a vacuum cleaner . • Clean spills and stains as quickly as possible. • For routine cleaning, wipe the surface with a soft, damp cloth. For more thorough cleaning, wipe the surface with a mild soap and water solution.
VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time (30 days or more), read the following maintenance recommendations to make sure your vehicle stays in good operating condition. All motor vehicles and their components were engineered and tested for reliable, regular driving.
Fuel system • Fill the fuel tank with high-quality fuel until the first automatic shutoff of the fuel pump nozzle. Cooling system • Protect against freezing temperatures. • When removing vehicle from storage, check coolant fluid level. Confirm there are no cooling system leaks, and fluid is at the recommended level.
Removing V ehicle from Storage When your vehicle is ready to come out of storage, do the following: • W ash your vehicle to remove any dirt or grease film build-up on window surfaces. • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collected during storage (mice/squirrel nests).
TIRE CARE Information About Uniform Tire Quality Grading T ire Quality Grades apply to new pneumatic passenger car tires. The T ire Quality Grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
T raction AA A B C W ARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. The traction grades, from highest to lowest are AA, A, B, and C.
• Standard load: A class of P-metric or Metric tires designed to carry a maximum load at set pressure. For example: For P-metric tires 35 psi (2.4 bar) or 36 (2.5 bar) depending on tire size and for Metric tires 36 psi (2.5 bar). Increasing the inflation pressure beyond this pressure will not increase the tire capability .
Information on P Type Tires P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below . (Note that the tire size, load index and speed rating for your vehicle may be different from this example.
G. H: Indicates the tire’ s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods of time under a standard condition of load and inflation pressure. The tires on your vehicle may operate at different conditions for load and inflation pressure.
J. T ire Ply Composition and Material Used: Indicates the number of plies or the number of layers of rubber -coated fabric in the tire tread and sidewall. T ire manufacturers also must indicate the ply materials in the tire and the sidewall, which include steel, nylon, polyester , and others.
Additional Information Contained on the Tire Sidewall for L T T ype Tires L T type tires have some additional information beyond those of P type tires. These differences are described below . Note: T ire Quality Grades do not apply to this type of tire.
Information on T T ype Tires T type tires have some additional information beyond those of P type tires. These differences are described below . T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
INFLA TING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required.
on the Safety Compliance Certification Label (affixed to either the door hinge pillar , door -latch post, or the door edge that meets the door -latch post, next to the driver’ s seating position), or T ire Label which is located on the B-Pillar or the edge of the driver’ s door .
6. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak. 7. Check the sidewalls to make sure there are no gouges, cuts or bulges.
W ARNING: Age T ires degrade over time depending on many factors such as weather , storage conditions, and conditions of use (such as load, speed, inflation pressure) the tires experience throughout their lives. In general, tires should be replaced after six years regardless of tread wear .
Tire Replacement Requirements W ARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus L T -metric or all-season versus all-terrain) as those originally provided by Ford.
W ARNING: T o reduce the risk of serious injury , when mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below . If the beads do not seat at the maximum pressure indicated, re-lubricate and try again.
Safety Practices W ARNING: If your vehicle is stuck in snow , mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. W ARNING: Do not spin the wheels at over 35 mph (56 km/h).
The tires should also be balanced periodically . An unbalanced tire and wheel assembly may result in irregular tire wear . Tire Rotation Note: If your tires show uneven wear , ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation.
USING SNOW CHAINS W ARNING: Driving too fast for conditions creates the possibility of loss of vehicle control. Driving at very high speeds for extended periods of time may result in damage to vehicle components. W ARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford.
TIRE PRESSURE MONITORING SYSTEM W ARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. See Inflating Y our T ires in this chapter .
telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly . The tire pressure monitoring system complies with part 15 of the FCC rules and with RSS-210 of Industry Canada.
When Y ou Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air .
Low tire pressure warning light Possible cause Customer action required Flashing warning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When Y our T emporary Spare T ire is Installed in this section.
CHANGING A ROAD WHEEL W ARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However , if you must use a sealant, have an authorized dealer install a new tire pressure monitoring system sensor and valve stem.
2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS TIRE AND WHEEL FOR TEMPORARY USE ONL Y When driving with one of the dissimilar spare tires listed above, do not: • exceed 50 mph (80 km/h).
• Ground clearance and parking at curbs • W inter weather driving capability • W et weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly , additional caution should be given to: • towing a trailer .
W ARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
6. The vehicle jacking points are shown here, and can be identified by the triangle markings on the vehicle. Details are depicted on the yellow warning label on the jack. Note: Jack at the specified locations to avoid damage to the vehicle. 7. Put the jack in the jack notch next to the tire you are changing.
TEMPORAR Y MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only . See your Ford authorized dealer for additional replacement sealant canisters. The kit is located in the spare tire well in the trunk.
Do not attempt to repair punctures larger than 1 ⁄ 4 inch (6 millimeters) or damage to the tire’ s sidewall. The tire may not completely seal. Loss of air pressure may adversely affect tire performance. For this reason: • Note: Do not drive the vehicle above 50 mph (80 km/h).
• Only use the sealing compound before the use by date. The use by date is on the lower right hand corner of the label located on the sealant canister (bottle).
Sealant compound contains latex. T o avoid any allergic reactions, use the non-latex gloves located in the accessory box on the underside of the temporary mobility kit housing. Do not remove any foreign object that has pierced the tire. If a puncture is located in the tire sidewall, stop and call roadside assistance.
8. Inflate the tire to the pressure listed on the T ire Label located on the driver’ s door or the door jamb area. Note: When the sealing compound is first added into the tire, the air pressure gauge reading on the compressor unit may indicate a higher value; this is normal and should be no reason for concern.
W ARNING: The power plug may get hot after use and should be handled carefully while unplugging. Check the air pressure of your tires as follows: 1. Remove the valve cap from the tire valve. 2. Unhook the black hose from the side of the compressor and fasten firmly on the valve stem by turning clockwise.
Removal of the sealant canister from the temporary mobility kit: 1. Unwrap the clear tube from the compressor housing. 2. Locate the yellow cap at the end of the clear tube. 3. Using the yellow cap tool, press the tab located on the temporary mobility kit compressor housing while pulling up on the sealant canister .
Installation of the sealant canister to the temporary mobility kit: 1. Align the sealant canister with the temporary mobility kit housing. 2. Once aligned, seat the sealant canister by lightly pushing down until you hear an audible click. 3. W rap the clear tube around the compressor housing.
Be sure to check the sealant compound’ s use-by date regularly . The use-by date is on the lower right hand corner of the label located on the sealant canister .
ENGINE SPECIFICA TIONS Engine 3.7L V6 Engine 5.0L V8 Engine Cubic inches 227 302 Required fuel Minimum 87 octane Minimum 87 octane Firing order 1-4-2-5-3-6 1-5-4-8-6-3-7-2 Ignition system Coil on plug Coil on plug Spark plug gap 0.049–0.053 in (1.25-1.
5.0L V8 engine Capacities and Specifications 301 2014 05+ Mustang (197) Owners Guide gf, 3rd Printing, January 2014 USA (fus).
TECHNICAL SPECIFICA TIONS Item Capacity Ford part name or equivalent Ford part number / Ford Specification Brake fluid and clutch fluid (if equipped) 1 Between MIN and MAX lines on reservoir Motorcraf.
Item Capacity Ford part name or equivalent Ford part number / Ford Specification Engine oil without T rack Pack 3,4,5 6.0 quarts (5.7L) (3.7L engine) Motorcraft SAE 5W -20 or equivalent motor oil WSS-M2C945-A 8.0 quarts (7.6L) (5.0L engine) Engine oil with T rack Pack 3,4,5 8.
Item Capacity Ford part name or equivalent Ford part number / Ford Specification W indshield washer fluid Fill as required Motorcraft Premium W indshield W ash Concentrate with Bitterant (US); Premium Quality W indshield W asher Fluid (Canada) ZC-32-B1 (US); CXC-37-(A, B, D and F) (Canada) / WSB-M8B16-A 2/-- Fuel tank 16.
Item Capacity Ford part name or equivalent Ford part number / Ford Specification 6 Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST -M2C118-A for complete refill of T raction-Lok or TORSEN axles.
MOTORCRAFT P ART NUMBERS Component 3.7L V6 engine 5.0L V8 engine Air filter element F A-1897 F A-1897 Battery BXT -96R-590 BXT -96R-590 Oil filter FL-500-S FL-500-S Spark plugs 1 SP520 SP519 Cabin air.
The V ehicle Identification Number (VIN) contains the following information: A. W orld manufacturer identifier B. Brake system / Gross V ehicle W eight Rating (GVWR) / Restraint Devices and their location C. Make, vehicle line, series, body type D. Engine type E.
TRANSMISSION CODE DESIGNA TION Y ou can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents.
ACCESSORIES For a complete listing of the accessories that are available for your vehicle, please contact an authorized dealer or visit our online store at www .
Peace of mind • Remote start • Full vehicle covers • V ehicle security systems • Keyless entry keypad • Wheel locks • Locking fuel plug • Bumper mounted parking assist system* *The acces.
Extended Service Plan PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REP AIRS WITH A FORD EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. Only) More than 32 million Ford owners have discovered the powerful protection of Ford Extended Service Plan.
Roadside Assistance Exclusive 24/7 roadside assistance, including: • T owing, flat-tire change and battery jump starts • Out of fuel and lock-out assistance • T ravel expense reimbursement for l.
Interest Free Finance Options A vailable T ake advantage of our interest free installment payment plan. Just a 10% down payment will provide you with an affordable, no interest, no fee payment program allowing you all the security and benefits Ford ESP has to offer while paying over time.
GENERAL INFORMA TION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and T elecommunications Commission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.
MP3 T rack and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode.
AM/FM/CD/SIRIUS SA TELLITE RADIO W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
there are fewer than 10 strong stations, the system stores the last one in the remaining presets. Note: Autoset does not delete your original preset stations. Note: In order to re-run the autoset features, you must first turn it off before turning it back on.
• OK allows you to confirm commands with phone and media features. If your vehicle is equipped with SYNC®, see the SYNC® chapter for more information. • Play/Pause allows you to play or pause a track when listening to a CD. I. AUX: Press this button to access media through your auxiliary input jack.
• In Sirius mode, press this button to enter the desired channel (such as 002) using the memory preset buttons. If you only enter one digit, and press OK, the system goes to that channel. If you enter three digits, the system automatically goes to that channel, if available.
Satellite Radio Reception Factors Potential satellite radio reception issues Antenna obstructions For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible.
Satellite Radio Electronic Serial Number (ESN) Y ou need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, you can view this number by pressing SIRIUS and memory preset 1 at the same time. T o access your ESN, press the bottom left corner of the touchscreen, then SIRIUS > Options.
Radio display Condition Possible action Call SIRIUS 1–888–539–7474 Y our satellite service is no longer available. Call Sirius at 1–888–539–7474 to resolve subscription issues. None Found. Check Channel Guide. All the channels in the selected category are either skipped or locked.
The auxiliary input jack allows you to connect and play music from your portable music player through your vehicle speakers. Y ou can use any portable music player designed for use with headphones. Y our audio extension cable must have male 1 ⁄ 8 -inch (3.
USB PORT (IF EQUIPPED) W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player . This allows you to: • Make and receive calls. • Access and play music from your portable music player . • Use 911 Assist, V ehicle Health Report and SYNC Services (T raffic, Directions & Information) (if equipped).
GENERAL INFORMA TION Make sure you review your device’ s manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday , 8:30am-9:00pm EST . Sunday , 10:30am-7:30pm EST .
When using SYNC: • Do not operate playing devices if the power cords or cables are broken, split or damaged. Place cords and cables out of the way , so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.
independently of Ford Motor Company and Ford of Canada. For further privacy information, see the sections on 911 Assist, V ehicle Health Report, and T raffic, Directions and Information. USING VOICE RECOGNITION This system helps you control many features using voice commands.
Adjusting the Interaction Level Push the voice icon; when prompted, say “V oice settings”, then any of the following: When you say: The system: “Interaction mode standard” Provides more detailed interaction and guidance. “Interaction mode advanced” Provides less audible interaction and more tone prompts.
• Speak naturally , without long pauses between words. • At any time you can interrupt the system while it is speaking by pressing the voice icon. USING SYNC WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone’ s functionality .
Depending on your phone’ s capability and your market, the system may prompt you with questions such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up), downloading your phone book, etc.
“DIAL” “<number> 0–9” “Asterisk” (*) “Clear” (deletes all entered digits) “Delete” (deletes one digit) “Plus” “Star” Note: T o exit dial mode, press and hold the phone button or press MENU to go to the PHONE menu.
T o erase the last spoken digit, say “Delete”; to erase all spoken digits, say “Clear”. T o end the call, press and hold the phone button. Receiving Calls When receiving a call, you can: • Answer the call by pressing the phone button. • Reject the call by pressing and holding the phone button.
Accessing Features through the Phone Menu SYNC’ s phone menu allows you to redial a number , access your call history and phone book and send text messages as well as access phone and system settings. Y ou can also access advanced features, such as 911 Assist, V ehicle Health Report and SYNC Apps.
T ext Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a T ext Message Note: This is a phone-dependent feature.
Sending T ext Messages T ext messaging is a phone-dependent feature. If your phone is compatible, SYNC allows you to receive, send, download and delete text messages. 1. Press the PHONE hard button. 2. Select the T ext Messaging tab, then press Compose.
Accessing Y our Phone Settings These are phone-dependent features. Y our phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phone book and also set up automatic download. 1. Press the phone button.
When you select: Y ou can: Modify Phonebook Modify the contents of your phone book (such as add, delete, download). Press OK to select and scroll between: Add Contacts: Press OK to add more contacts from your phone book. Push the desired contact(s) on your phone.
System Settings System Settings provide access to your Bluetooth Devices and Advanced menu features. The Bluetooth Devices menu allows you to add, connect, delete and set a phone as primary as well as turn your Bluetooth feature on and off.
.
SYNC APPLICA TIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. T o check your phone’ s compatibility , visit www .SYNCMyRide.com, www .SYNCMyRide.ca or www .syncmaroute.
Note: Every phone operates differently . While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature. If a crash deploys an airbag (excludes knee airbags and rear i.
In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would activate 911 Assist); however , if 911 Assist is triggered, SYNC tries to contact emergency services.
V ehicle Health Report W ARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. V ehicle Health Report supplements, but cannot replace normal maintenance and vehicle inspection.
T o run a report using the phone button and your vehicle is not equipped with a navigation system, 1. Press the phone button to enter the Phone Menu. 2. Scroll until V ehicle Health appears in the display , then press OK. 3. Select from one of the options listed in the following table.
V ehicle Health Report Privacy Notice When you run a V ehicle Health Report, Ford Motor Company may collect your cellular phone number (to process your report request) and diagnostic information about your vehicle. Certain versions or updates to V ehicle Health Report may also collect additional vehicle information.
Note: When you connect, the service uses GPS technology and advanced vehicle sensors to collect the vehicle’ s current location, travel direction and speed to help provide you with the directions, traffic reports, or business searches you request.
Receiving Turn-by-T urn Directions 1. When connected to SYNC Services, say “Directions” or “Business search”. T o find the closest business or type of business to your current location, just say “Business search” and then “Search near me”.
Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel. 2. Say “Good-bye” from the SYNC Services main menu. SYNC Services quick tips Personalizing Y ou can personalize your Services feature to provide quicker access to your most used or favorite information.
SYNC AppLink™ Note: This feature is only available in the United States. Note: Y our smartphone must be paired and connected to SYNC to access AppLink. Note: iPhone users need to connect the phone to the USB port in order to start the application. It is recommended to lock your iPhone after starting an application.
T o Access Using the Navigation Screen (If Equipped) 1. Press the Phone button. 2. Press the SYNC Apps tab. 3. Press Mobile Apps. 4. Select the app to start it. T o Access Using Voice Commands 1. Press the voice icon. 2. When prompted, say “Mobile Apps”.
T o connect using the system menu: 1. Plug the device into the vehicle’ s USB port. 2. Press the MEDIA hard button. 3. Select the User Device tab, the press Source repeatedly until USB appears. 4. Press Music Library . 5. Select from the listed features.
“USER DEVICE” “Play track <name>” 1,3 “Repeat off” “Repeat on” “Shuffle off” “Shuffle on” “Similar music” “V oice settings” 1 “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc.
Media Menu Sources and Features The User Device menu allows you to select your media source and how to play your music (by artist, genre, shuffle, repeat, etc.). 1. Make sure your USB device is plugged in to your system. 2. Press the MEDIA hard button.
Accessing the Media Music Library This menu allows you to select and play your media by artist, album, genre, playlist, track, similar music or even to explore what is on your USB device. 1. Make sure that your device is plugged into the USB port and is turned on.
When you select: Y ou can: Playlists Access your playlists (from formats, such as ASX, .M3U, .WPL, .MTP .). The system lists your playlists alphabetically in flat file mode. If there are more than 255, they are organized into alphabetical categories. T racks Search for and play a specific track which has been indexed.
System Settings System settings provide access to your Bluetooth devices and Advanced menu features. The Bluetooth menu allows you to add, connect and delete a device as well as turn the Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, languages, defaults and perform a master reset.
TROUBLESHOOTING Y our SYNC system is easy to use. However , should questions arise, see the tables below . Use the website at any time to check your phone’ s compatibility , register your account and set preferences as well as access a customer representative via an online chat (during certain hours).
Phone issues Issue Possible cause(s) Possible solution(s) The system says Phonebook Downloaded but my phonebook in SYNC is empty or is missing contacts. Limitations on your phone’ s capability . • T ry pushing your phonebook contacts to SYNC by using the Add Contacts feature.
USB and media issues Issue Possible cause(s) Possible solution(s) I am having trouble connecting my device. Possible device malfunction. • T ry turning off the device, resetting the device or removing the device’ s battery , then trying again. • Make sure you are using the manufacturer’ s cable.
V ehicle Health Report and SYNC Services (T raffic, Directions and Information) issues Issue Possible cause(s) Possible solution(s) I received a text that the V ehicle Health Report is not activated. • Y our account may not be activated on the website, OR • Y ou may have the wrong VIN (vehicle identification number) listed.
V oice command issues Issue Possible cause(s) Possible solution(s) SYNC does not understand what I am saying. • Y ou may be using the wrong voice commands, OR • Y ou may be speaking too soon or at the wrong time. • Review the Phone voice commands and the Media voice commands at the beginning of their respective sections.
V oice command issues Issue Possible cause(s) Possible solution(s) SYNC does not understand or is calling the wrong contact when I want to make a call.
AppLink issues Issue Possible cause(s) Possible solution(s) SYNC does not find any mobile apps that are on my phone. • Y our device may not support the AppLink feature, OR • The application does not support AppLink., OR • If you have an iPhone, it may not be plugged in, OR • Y our phone may not be paired or connected.
NA VIGA TION CONTROLS T ype 1 W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
E. TUNE RPT : • In radio or satellite radio mode, turn the control to advance in individual increments up or down the frequency band to the desired station. • In MP3 mode, turn the control to advance to the next or previous folder . • In navigation mode, press this button to hear the last spoken navigation guidance prompt.
M. MENU: • Press this button to access the system menu. • Press while the system menu is active to access the menu tabs of Display , Clock, Feedback Settings, System Settings and V alet Mode. N. MAP: • Press this button to access the navigation map.
T ype 2 W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
Note: Some features, such as Sirius satellite radio, may not be available in your location. Check with an authorized dealer . A. Memory presets: • Store your favorite radio stations. T o store a radio station, tune to the station, then press and hold a preset button until sound returns.
K. SEEK: • In radio and satellite radio mode, press the arrow buttons to find previous or next available stations or channels within the currently selected Category or Genre. • In CD and DVD modes, press the arrow buttons to select the previous or next track or chapter .
Display mode voice commands “Display on” “Display off” “Status bar” “Brighter” “Dimmer” “Day” “Night” “Auto” “Help” ST A TUS BARS The top status bar shows the current mode, exterior temperature, time and display icons if you have enabled Bluetooth or other options.
• The right side can also display the uploaded photo. The upper right panel only displays the current audio settings. The lower right panel displays your vehicle’ s climate settings or the visualizer . Loading Photos Note: The system is not compatible with discs written in Packet W rite mode.
Using the T ouch-sensitive Controls on Y our System T o turn a feature on and off, just touch the graphic with your finger . T o get the best performance from the touch-sensitive controls: • Make sure your hands are clean and dry .
How T o Use V oice Commands with Y our System Press the voice icon; after the tone, speak your command clearly . Y ou can say these commands at any time.
Confirmation Prompts: The system uses these short questions to confirm your voice request. If turned off, the system simply makes a best guess as to what you requested.
If you select: Y ou can: Feedback Settings T ouch Screen Button Beep allows you to select when the system sounds an audible tone: All Buttons (whenever any system button is touched), T ouch Screen (only when touchscreen selections are made) or Off (no audible tones at all).
If you select: Y ou can: System Settings Language allows you to choose between English, Spanish and French. Units allows you to choose between English and Metric measurements.
When you select: Y ou can: Show Options Scan allows you to hear a brief sampling of all radio stations. Scan Presets allows you to hear a brief sampling of all stations stored in the memory presets. Autoset Presets allows you to store the strongest local stations available in the AM and FM frequency bands.
When you select: Y ou can: Set PTY/All Select a category of music you would like to search for and then choose to either seek or scan for the stations. ** Note: The system scans the frequency band three times for the chosen program type. If the program type is unavailable in your reception range, the system returns to the previous station.
“RADIO” “AM” “Off ” “Store FM 1 preset <1–6>” “AM <530–1710>” “On” “Store FM 2 preset <1–6>” “AM preset <1–6>” “Preset <1–6>” “Store autoset presets” “FM <87.7–107.
When HD Radio is on and you tune to a station broadcasting HD Radio technology , you may notice the following indicators on your screen: HD) logo blinks when acquiring a digital station and stays solid when digital audio is playing. When this logo is available, you may also see T itle and Artist fields on-screen.
When you select: Y ou can: Set PTY/All Select a category of music you would like to search for and then choose to either seek or scan for the stations. Note: The system scans the frequency band three times for the chosen program type. If the program type is unavailable in your reception range, the system returns to the previous station.
HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
Potential Station Issues Issue Cause Action Sound fading or blending in and out. The radio is shifting between analog and digital audio. No action required. The reception issue may clear up as you continue to drive. There is an audio mute delay when selecting HD2 or HD3, multicast preset or Direct T une.
HD Radio V oice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
When you select: Y ou can: Channel Guide See a list of channels sorted by genre and also skip or lock out certain channels. Select the desired genre and choose a channel by pressing the channel name button. Y ou can then choose to Skip or Lock a certain channel.
When you select: Y ou can: Memo Press this button to save a song title and artist to the system. When the saved song is playing on any satellite radio channel, the system alerts you with a pop-up in the lower status bar . Y ou can either tune to the station or ignore the pop-up.
Sirius® Satellite Radio V oice Commands If you are listening to Sirius satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart.
Sirius® Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
T roubleshooting tips Radio Display Condition Possible Action Acquiring... Radio requires more than two seconds to produce audio for the selected channel. No action required. This message should disappear shortly . Sat Fault/Sirius System Failure There is an internal module or system failure present.
CD Press the MEDIA hard button, and then select the CD tab on the touchscreen. If there is no disc in the system, NO DISC appears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat, Shuffle, T rack List and Record.
MP3 Press the MEDIA hard button, and then select the CD tab on the touchscreen. If there is no disc in the system, NO DISC appears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat, Shuffle, Folder Mode and Folder List.
When you select: Y ou can: Settings V ideo Display Settings allows you to adjust the brightness and contrast. Y ou can also choose to return to the default settings by pressing Restore Default. Audio Language allows you to choose which language you would like the DVD audio track to play in.
Disc V oice Commands If you are listening to or watching a disc, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to or watching a disc, press the voice button and, after the tone, say “Disc”, then any of the commands in the following chart.
V ideo CD Voice Commands If you are watching a video CD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not watching a video CD, press the voice button and, after the tone, say “Video CD”, then any of the commands in the following chart.
Accessing the Music in Y our Jukebox Once you have saved music to your jukebox, you can then choose different ways to play the music. 1. Press the MEDIA hard button on the navigation system.
Creating a Playlist Press the MEDIA hard button, and then select the Jukebox tab on the touchscreen. 1. Select Options. 2. Select Edit Playlists, then which playlist you would like to create. 3. Select which category you would like to access from your saved music.
User Device If your vehicle is equipped with SYNC, there is a User Device tab. For more information, see the SYNC chapter . Line In (Auxiliary Input Jack) Y our vehicle is equipped with an audio input jack, which allows you to plug a portable audio device into your vehicle’ s audio system.
Climate Control Features Fan speed T ouch + or – to increase or decrease fan speed. Passenger temperature T ouch the arrows to increase or decrease the temperature. Dual T ouch to turn on the passenger temperature control. MAX A/C T ouch to cool your vehicle with recirculated air .
INFORMA TION Under the Information menu, you can access features such as Where Am I? and Sirius T ravel Link, view your calendar , see system information and get basic system help. Press the I (Information) hard button to access these features. Where Am I? Press the I button and select the Where Am I? tab.
Press the I (information) button, then select Sirius T ravel Link. Choose from any of the following services: When you select: Y ou can: T raffic On Route Identify traffic incidents on your route, nearby your vehicle’ s current location or near any of your favorite places (if programmed).
Sirius Travel Link V oice Commands Press the voice button and, after the tone, say “T ravel Link”, then any of the commands in the following chart: “TRA VEL LINK” “5–day weather forecast.
“SPOR TS SCORES” “Baseball scores” “NBA scores” “College basketball scores” “NFL scores” “College football scores” “NHL scores” “Golf leaderboard” “T ravel link help” “Motor sports results” Calendar Press the I (information) button, then select Calendar .
Help The Help screen allows you to view basic information about controls and driving restrictions as well as traffic legend information and basic voice commands available in various modes. If you select: Y ou can: Basic Operation View hard buttons on your navigation system.
NA VIGA TION SYSTEM Y our navigation system allows you to set a destination by using your touchscreen or voice commands. The navigation system contains map coverage for the United States, Puerto Rico and U.S. Virgin Islands, Canada and Mexico. Disclaimer A disclaimer appears once per ignition cycle when the DEST button is pressed.
Programming a Destination Using the T ouchscreen 1. Press the DEST hard button. 2. Select from the following: Quick Note: Items on this screen are selectable at any speed. Cancel Route T ouch this button to cancel the current route. Emergency T ouch this button to find hospitals and police stations close to your vehicle’ s location.
Quick Note: Items on this screen are selectable at any speed. Previous Destination T ouch this button to select one of your previous destinations. Address Book T ouch this button to set an entry in your address book as your destination.
Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Street Address T ouch this button to program a street address as a destination or waypoint. • State/Prov lets you use the keyboard to type or you can select the area to search from a list.
Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Point of Interest (POI) T ouch this button to select a point of interest on the map as a destination or waypoint. There are three ways to search for a point of interest: 1.
Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Freeway Entrance/Exit T ouch this button to select an entrance and exit point to a freeway you select. Y ou can sort the entrance and exit point alphabetically or in order of distance from your vehicle’ s position.
Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Intersection T ouch this button to select an intersection point. Enter the name of the first street, then the first letter of the second street.
* T o delete all stored Address Book and Previous Destination entries at once: 1. Press the MENU hard button. 2. Select the System Settings tab. 3. Press the Vi e w button for Delete Stored Items. 4. Select Address Book or Previous Destinations. Edit Route Cancel Route T ouch this button to cancel the current route.
Programming a Destination Using V oice Commands Press the voice button on the steering wheel. If you want to: Say: Enter an address. “Destination street address” Enter an intersection. “Destination intersection” Find a point of interest (POI) by its category .
Route Selection Screen Icons Icons, located above the route selection choices, represent features on the routes. A. Freeways B. T oll Roads C. Ferries D. High-occupancy V ehicle Lanes E. T ime-restricted Roads F . A void Area Selection If you select the fastest route, and the freeways icon is illuminated, this means that the route uses freeways.
W ithin these main categories, there are subcategories, which contain more listings: Subcategories Restaurant Auto Dealership Parking Public T ransit Home & Garden Education Personal Care Services Setting Y our Navigation Preferences Select settings for the system to take into account when planning your route.
Map Preferences Bird’ s Eye V iew ON provides an elevated map perspective. OFF turns the feature off. Adjust Angle offers six different map angles. T urn List Format T op-to-Bottom starts the turn instructions from the top. Bottom-to-T op starts the turn instructions from the bottom.
T raffic Preferences * T raffic Icons to overlay on Map T ouch this button to display a list of map icons that you can turn off and on. The list of icons includes: • W eather related incidents • Road work • Incident • Accident • Closed road T raffic Flow Overlay T ouch this button to have the map show traffic flow coloring on major roads.
Navigation Preferences A vg. Speed: Residential When this feature is on, the system displays the average speed on a residential road, initially set to 25 mph (40 km/h). Y ou can change the setting for your driving preferences. This setting helps estimate your arrival time at a destination based on your driving preferences.
Navigation Preferences Calibrate Position allows you to adjust the direction of your vehicle by pressing the arrow buttons on the screen. Distance allows you to recalibrate the distance to the destination while your vehicle is moving. Restore Default Settings T ouch the Reset button to return the settings to factory defaults.
North Up always shows the northern direction to be upward on the screen. Map Icons V ehicle mark shows the current location of your vehicle. It stays in the center of the map display , except when in scroll mode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen.
No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may display under normal operation in an area with poor GPS access. Map Scale The map display scale has 17 levels, ranging from 0.02 miles (.
Quick-touch Buttons When in map mode, touch anywhere on the map display to access the following options: When you select: Y ou can: Set as Dest Select a scrolled location on the map as your destination. Y ou may scroll the map by pressing your index finger on the map display .
Navigation Map Updates Annual navigation map updates are available for purchase through your dealership, by calling 1-800-NA VMAPS (in Mexico, call 01–800–557–5539) or going to www .navigation.com/ford. Y ou need to specify the make and model of your vehicle to determine if there is an update available.
“DESTINA TION” “Intersection” “Nearest <POI category>” “Nearest POI” “POI” “POI category” “Previous destination” “Street address” “Help” T roubleshooting Symptoms Possible Cause Action Focus error . The system is not able to play a reproduced disc.
Symptoms Possible Cause Action A pop-up window displays “Navigation fault. A system fault has been detected that may cause the navigation to perform abnormally . Please contact your dealership.” There is a system hardware or software error . Contact an authorized dealer .
GENERAL INFORMA TION SYNC® End User License Agreement (EULA) • Y ou have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMP ANY from an affiliate of Microsoft Corporation (“MS”).
DESCRIPTION OF OTHER RIGHTS AND LIMIT A TIONS: • Speech Recognition: If the SOFTW ARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process.
SOFTW ARE’ s ability to use WMDRM to play or copy protected content. This action does not affect unprotected content. When your DEVICE downloads licenses for protected content, you agree that Microsoft may include a revocation list with the licenses.
If MS, Microsoft Corporation, their affiliates and/or their designated agent make available Supplemental Components, and no other EULA terms are provided, then the terms of this EULA shall apply , exc.
suppliers. The SOFTW ARE is licensed, not sold. Y ou may not copy the printed materials accompanying the SOFTW ARE. All title and intellectual property rights in and to the content which may be access.
• THERE ARE NO W ARRANTIES OTHER THAN THOSE THA T MA Y EXPRESSL Y BE PROVIDED FOR YOUR NEW VEHICLE. End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This syst.
Prolonged V iews of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention.
Potential Map Inaccuracy Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes. Emergency Services Do not rely on any navigation features included in the system to route you to emergency services.
guidance, fleet management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs.
Agreement in the event that you (i) fail to pay license fees due for the Data, or (ii) if any of the following events occur affecting you: (a) voluntary bankruptcy or application for bankruptcy; (b) i.
Gracenote and CDDB are registered trademarks of Gracenote. The Gracenote logo and logotype, and the ⬙ Powered by Gracenote™ ⬙ logo are trademarks of Gracenote. Gracenote® End User License Agreement (EULA) This device contains software from Gracenote, Inc.
Gracenote uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow Gracenote to count queries without knowing anything about who you are. For more information, see the web page at www .
GENERAL MAINTENANCE INFORMA TION Why Maintain Y our V ehicle? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it.
Note: Not all dealers have extended hours or body shops. Please contact your dealer for details. Protecting Y our Investment Maintenance is an investment that will pay dividends in the form of improved reliability , durability and resale value.
Additives and Chemicals Ford Motor Company recommended additives and chemicals are listed in the owner manual and in the Ford W orkshop Manual. Additional chemicals or additives not approved by Ford are not recommended as part of normal maintenance. Please consult your warranty information.
Check every six months Safety warning lamps (brake, ABS, airbag, safety belt) for operation. W asher spray and wiper operation. Clean or replace blades as necessary . Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly .
442 Scheduled Maintenance 2014 05+ Mustang (197) Owners Guide gf, 3rd Printing, January 2014 USA (fus).
NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® – 3.7L and 5.0L Engines Y our vehicle is equipped with an Intelligent Oil-Life Monitor that determines when the engine oil needs to be changed based on how your vehicle is used.
Normal scheduled maintenance * At every oil change interval as indicated by the information display Change engine oil and filter . ** Rotate tires, inspect tire wear and measure tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level.
Other maintenance items 1 Every 20000 miles (32000 km) Replace cabin air filter (if equipped). Every 30000 miles (48000 km) Replace engine air filter . At 100000 miles (160000 km) Change engine coolant. 2 Every 100000 miles (160000 km) Replace spark plugs.
Maintenance Schedule Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A .
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
SPECIAL OPERA TING CONDITIONS – 3.7L AND 5.0L ENGINES If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance.
Operating in Dusty or Sandy Conditions Such as Unpaved or Dusty Roads Inspect frequently , service as required Replace cabin air filter (if equipped). Replace engine air filter . Every 5,000 miles (8,000 km) Inspect the wheels and related components for abnormal noise, wear , looseness or drag.
Special Operating Condition Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
EXCEPTIONS Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped with Ford-design axles are lubricated for life; do not check or change fluid unless a leak is suspected, service is required or the assembly has been submerged in water .
ENGINE COOLANT CHANGE RECORD 3.7L and 5.0L Engines * Initial change Six years or 100000 miles (160000 km) (whichever comes first) After initial change Every three years or 50000 miles (80000 km) * Shelby GT500 owners: See the Shelby GT500 supplement.
911 Assist™ .............................. 341 A ABS (see Brakes) ..................... 176 Accessing call history/phone book during active call ............. 333 Accessing the help screen ....... 404 Accessing the music in your jukebox ............
fluid, refill capacities .............. 302 fluid, specifications ................. 302 lubricant specifications .......... 302 parking ....................................177 shift interlock .......................... 168 trailer ....................
D Defrost ............................... 120, 122 rear window ............................ 127 Dipstick automatic transmission fluid ..........................................242 engine oil ................................. 237 Driving under special conditions .
H Hazard flashers ......................... 212 HD Radio™ ...............................380 Headlamps aiming ...................................... 248 bulb specifications .................. 254 flash to pass .............................. 80 high beam .
Message center ........................... 99 display color ............................ 104 english/metric button ............. 104 MyColor display ...................... 104 system check button .............. 104 warning messages ........... 104, 114 Mirrors .
S Safety Belt Maintenance ............ 42 Safety belts (see Safety restraints) .................................... 35 Safety defects, reporting .......... 224 Safety information .................... 326 Safety restraints .................... 35–36 Belt-Minder® .
An important point after buying a device Ford Mustang (2014) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ford Mustang (2014) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ford Mustang (2014) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ford Mustang (2014) you will learn all the available features of the product, as well as information on its operation. The information that you get Ford Mustang (2014) will certainly help you make a decision on the purchase.
If you already are a holder of Ford Mustang (2014), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ford Mustang (2014).
However, one of the most important roles played by the user manual is to help in solving problems with Ford Mustang (2014). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ford Mustang (2014) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
