Instruction/ maintenance manual of the product K8285 Ford
Go to page of 28
Owner's Manual with Assembly Instructions For Model K8285 • Please read this manual • Please read this manual and save it with y our original and save it with y our original sales receipt. sales receipt. • T ool needed for assembl y: • T ool needed for assembl y: Phillips Screwdriver Phillips Screwdriver (not inc luded).
K8285a-0920 2 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W arnings and Cautions .
K8285a-0920 3 ELECTRICAL HAZARD RIDING HAZARD • Prevent Injuries and Deaths • Direct Adult Super vision Required. • Nev er Ride at Night. • K eep Children Within Saf e Riding Areas.
K8285a-0920 4 • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751 , rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
K8285a-0920 5 Fasteners Shown Actual Size #8 x 3 / 4 " Screw - 19 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver .
K8285a-0920 6 P ARTS PICTURE 1 V ehicle 2 Cargo Bed 3 2 Hubcaps 4 Steering Wheel 5 Seat 6 Steering Wheel Cover 7 Hood 8 Long Seat Belt 9 2 Short Seat Belts 10 2 Rear Wheels 11 Front Grille 12 Grille Support 13 Steering Column 14 .
K8285a-0920 7 ELECTRICAL HAZARD Important Notes • Y our new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • We recommend that you start charging your battery before beginning assembly of your new vehicle.
K8285a-0920 8 Children can be har med b y small par ts, shar p edges and shar p points in the v ehicle's unassembled state , or b y electrical items. Care should be taken in unpac king and assembly of the v ehicle. Children should not handle par ts, including the batter y , or help in assembly of the v ehicle.
K8285a-0920 9 • Insert four screws into the top of the front grille and tighten. Hint: Y ou may need to push the ends of the front grille to insert and tighten the outer screws and push the center of the front grille to insert and tighten the middle screws.
K8285a-0920 10 • Align the hole in the steering wheel with the hole in the steering column. • Insert the .25" x 2.85" pin all the way through the hole in the side of the steering wheel and into the steering column, as shown. 6 • “Snap” the steering wheel cover onto the steering wheel.
K8285a-0920 11 • Fit the cargo bed onto the back of the vehicle as shown. The four tabs on the cargo bed should fit into slots in the vehicle. 10 Cargo Bed • Insert a screw up through both rear wheel wells and into the cargo bed. T ighten the screws.
K8285a-0920 12 • Fit the loops on grille support through the slots in the grille. Push to "snap" the loops in place. 15 • Insert a screw through the large opening in the steering column cap and the hole in the steering column. T ighten the screw .
K8285a-0920 13 20 • Slide the clip so that the straight end goes through the other hole in the axle. • Make sure the straight end of the clip is through both holes in the axle. • If the clip is upside down or not through both holes in the axle, you have not assembled it properly .
K8285a-0920 14 BACK VIEW • Insert the "T" fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the fastener side of the seat belt faces inward. Note: Y ou will pull only one T -Loop through the slot.
K8285a-0920 15 • Fit the long tabs on the hood into the slots in the front end of the vehicle. • Pull the hood forward and lower . Note: The hood is held down by magnets. Simply lift to open the hood. Do not use around items that are sensitive to or affected by magnetic fields.
K8285a-0920 16 1.5V x 4 "C" (LR14) Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your toy . T o avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
K8285a-0920 17 • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applie d to the vehicle.
K8285a-0920 18 IMPORT ANT! Use only a Power Wheels ® 12 volt lead-acid rechargeable battery with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the first time.
K8285a-0920 19 • Y our Power Wheels ® battery is a non-spillable, sealed lead-acid battery . It must be recycled or disposed of in an environmentally sound manner . • Do not dispose of a lead-acid battery in a fire. The battery may explode or leak.
K8285a-0920 20 RIDING HAZARD • Pre vent Injuries and Deaths • Direct Adult Supervision Required. • Ne ver Ride at Night. • K eep Children Within Safe Riding Areas .
K8285a-0920 21 As assembled, your vehicle is ready to roll in low speed (2 1 / 2 mph, maximum). After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed .
K8285a-0920 22 • Check all screws regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather , the vehicle should be stored inside or under a protective cover . Remember to charge the battery at least once per month while your vehicle is not in regular use.
K8285a-0920 23 IMPORT ANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below . If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 between 9 AM - 7 PM (EST) Monday through Friday and 1 1 AM - 5 PM (EST) Saturday .
K8285a-0920 24 PROBLEM POSSIBLE CAUSE SOLUTION V ehicle was running but suddenly stopped Loose wire or loose connectors Check all wires and connectors . Make sure the motor harness connector is plugged into the battery , and that there are no loose wires around the motors.
K8285a-0920 25 PROBLEM POSSIBLE CAUSE SOLUTION V ehicle runs sluggishly Undercharged battery Charge the battery . A new battery should hav e been charged for at least 18 hours before using the v ehicle for the first time. After first- time use, recharge the battery for at least 14 hours after each use.
K8285a-0920 26 PROBLEM POSSIBLE CAUSE SOLUTION Loud clacking or grinding noise from a motor-gearbox Broken gears Contact your local P ower Wheels ® authorized service center for diagnosis and repair . Charger gets warm during use It is normal for some chargers to get warm during use and is not reason for concern.
K8285a-0920 27 Bumper-to-Bumper* Limited W arranty One year limited warranty from the date of purchase on the Power Wheels ® vehicle. Six month limited warranty on the 12 volt battery .
PRINTED IN CHINA 73610a 0920 Or contact your local independently owned and operated Power Wheels ® Authorized Service Center . For the location nearest you, visit us on-line at www .powerwheels.com . Ford Oval and F-150 are registered trademarks owned and licensed by Ford Motor Company .
An important point after buying a device Ford K8285 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ford K8285 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ford K8285 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ford K8285 you will learn all the available features of the product, as well as information on its operation. The information that you get Ford K8285 will certainly help you make a decision on the purchase.
If you already are a holder of Ford K8285, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ford K8285.
However, one of the most important roles played by the user manual is to help in solving problems with Ford K8285. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ford K8285 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
