Instruction/ maintenance manual of the product 2002 Crown Victoria Ford
Go to page of 16
Severe service conditions 2 Maintenance recommendations 3 Severe duty equipment 4 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company .
This brochure is intended to aid the operators of police or fleet vehicles (used in severe duty , high mileage operations) in understanding the required maintenance services for such vehicles. It covers maintenance services for vehicles equipped with Heavy Duty packages.
Police and fleet vehicles are manufactured with heavy-duty parts that are designed specifically for the varying demands and unique requirements under which they are operated.
POWERTRAIN OVERSPEED PROTECTION The powertrain control module (PCM) includes logic to electronically prevent powertrain overspeed in any transmission selector position. TRANSMISSION The police vehicle has a unique high-performance powertrain including transmission and an aluminum driveshaft, which is designed for maximum vehicle performance.
COOLERS Extra oil cooler-Police It is strongly recommended that auxiliary devices such as lights not be installed at the grille. Such devices will reduce airflow through the grille and could potentially impact the cooling system performance.
alarms) that are equipped with radio transmitters. If you install this equipment in your vehicle, you should comply with those rules and a qualified technician should install the equipment. Ford Motor Company vehicles are in compliance with FCC regulations (CFR 47 Part 15) and SAE J551d for radiated electromagnetic emissions.
AIR BAGS Dual driver/passenger air bags affect the way police equipment can be mounted in police vehicles. Any surfaces that could come into contact with an air bag, once it has deployed, must not damage the air bag or alter its deployment path.
All air bag and equipment mounting zone dimensions are approximate due to different air bag deployment characteristics. Figure 1 1. 325 mm (12.5 inches) from center of air bag door 2. 375 mm (15 inches) from center of air bag door 3. 700 mm (27.5 inches) No objects should be placed between the air bags due to air bag variability .
Figure 2 1. 650 mm (25.5 inches). Cross section through center of vehicle (passenger side shown) 1 Severe duty equipment 9.
Figure 3 1. 580 mm (23 inches). Front passenger compartment 1 Severe duty equipment 10.
Figure 4 1. Area on top of instrument panel. Equipment must not interfere with driver visibility . 2. The air bag door must be kept clear for deployment of air bag 3. Area in front of center console from bottom of ashtray to top of instrument panel (see Figure 2 for dimensions) 4.
Figure 5 1. Area on top of instrument panel 2. Area in front of center console from tunnel up to instrument panel 3. Prisoner screen 4. 254 mm (10 inches) 5. Area on tunnel between seats 6. Height: 216 mm (8.5 inches) 7. 305 mm (12 inches) 8. Area on tunnel beneath center console 9.
Figure 6 1. Area on top of instrument panel. Equipment must not interfere with driver visibility . 2. Area on tunnel between seats 3. 229 mm (9 inches) 4.
IMPORT ANT AIR BAG DO’S AND DON’TS Do not attempt to tamper with, disconnect or deactivate the air bag system. T ampering with an air bag system could cause the bag to inflate or become inoperative. The air bag system should not be disconnected or deactivated.
deployment of air bags. W ithout the benefit of crash tests on vehicles equipped with push bumpers (there are a number of different styles available), it is Ford’ s opinion that installation of some push bumpers could affect the timing of the air bag deployment.
16.
An important point after buying a device Ford 2002 Crown Victoria (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ford 2002 Crown Victoria yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ford 2002 Crown Victoria - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ford 2002 Crown Victoria you will learn all the available features of the product, as well as information on its operation. The information that you get Ford 2002 Crown Victoria will certainly help you make a decision on the purchase.
If you already are a holder of Ford 2002 Crown Victoria, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ford 2002 Crown Victoria.
However, one of the most important roles played by the user manual is to help in solving problems with Ford 2002 Crown Victoria. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ford 2002 Crown Victoria along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
