Instruction/ maintenance manual of the product 00119628R01 Follett
Go to page of 24
Installation, Operation and Ser vice Manual VU300K Series Integral Cold Carbonation Ice and Be verage Dispenser s 00119628R01 801 Church Lane • PO Box D, Easton, PA 18044, USA Toll free (800) 523-9361 • (610) 252-7301 Fax (610) 250-0696 • www.follettice.
2.
Welcome to Follett Corporation Important cautions Specifications Installation Installing dispenser in counter Field wiring diagrams Connecting beverage lines Installing optional icemaker Operation How.
W elcome to Follett Follett ice dispensers enjoy a well-deserved reputation for excellent performance, long-term reliability and outstanding after-the-sale support. To ensure that this dispenser delivers that same degree of service, we ask that you take a moment to review this manual before beginning the installation of the dispenser.
5 Specifications Electrical Each dispenser requires a separate circuit with electrical disconnect within 10 ft (6m). Equipment ground required. Standard electrical – 115V, 60Hz, 1 phase. Maximum dispenser fuse – 20 amps, Maximum icemaker fuse – 20 amps each.
Front Vie w (shown with two Chewblet FC400A auto-fill icemaker kits) 24.62" (626mm) 30" (762mm) beverage lines enter through bottom 9" (229mm) 9" (229mm) 15" (381mm) 10" (254mm) 2.5" (64mm) 7" (178mm) 3" (77mm) 2" (51mm) 32.
Installation Installing dispenser in counter Note: All dispensers must be supported from below with supplied 4" – 6" (102 – 153mm) adjustable leg accessory, or equivalent. Do not hang dispenser on flange. All dispensers must be installed level in both directions to ensure proper operation.
8 Field wiring diagrams Note: Field wiring diagrams are intended to aid electricians or technicians in understanding how equipment works. All field wiring must be installed in accordance with all local and NEC codes. Connecting bevera ge lines 1. Connect syrup and water lines.
Installing optional auto-fill icemaker kit(s) Correct installation of remote icemaker(s) is critical to proper performance of icemaker. Refer to installation manual packed with icemaker for important details on ice transport tube run, ventilation requirements and other installation requirements.
Operation How the dispenser w orks Follett’s dispensers may be fed by Follett remote icemakers or manually loaded (using ice from another source). In all models, ice is stored below the counter in the dispenser storage area. When the dispense lever or button is pushed, the dispense motors are activated.
Cleaning Using solutions below, clean and sanitize storage area and beverage lines before starting unit and on a routine basis as noted below. Note: Always disconnect power before cleaning dispenser.
Recommended daily dispenser cleaning 1. Remove all debris from drain pan. 2. Pour 1 gallon (4L) hot water into drain pan to keep drain lines clear. Recommended weekly dispenser cleaning 1. Remove drain pan and grille and wash with Solution A. Rinse thoroughly.
Service Dispense chute cover removal 1. Remove top cover. 2. Remove two screws from top cover and pull cover forward and down to remove. 3. On push button units, disconnect plug on harness. Auger motor assembly removal 1. Remove drain pan. 2. Remove thumbscrews from splash guard and remove.
Wiring diagram VU300K series YELLOW YELLOW M3 WHITE BATHPUMP MOTOR (35 MIN ON DELAY) DISPENSE SWITCH LID PL1-1 L1 SWITCH POWER BLACK POWER BLACK TOP LID SWITCH NO C BLACK RED RED 24V RED PL6-1 C M2 MT.
Symptom Ice does not dispense. • Auger motor does not run • Wheel motor does not run Ice does not dispense. • Auger motor runs • Wheel motor runs • Gate does not open Ice does not dispense. • Auger motor does not run • Wheel motor runs Ice does not dispense.
Symptom Carbonator pump not turning on. Carbonator pump is not turning off. Carbonation system is not carbonating. Carbonation system is producing excessively carbonated beverages. Possible cause 1. Loose connection. 2. Electrode connections on carbonator tank are satisfied.
Condition Pump Solenoids Auger Wheel Beverage valves Top lid off OFF ON OFF OFF ON Drain pan off ON ON OFF OFF OFF On/off switch in OFF position OFF OFF OFF OFF OFF Beverage switch in OFF position ON .
Replacement par ts Reference # Description Part # 1 Lid, with graphics, single-sided 00126805 2 Graphics, “Follett” 00116780 3 Access panel, tower, single-sided 00108407 Not shown Cover, ice openi.
1 2 8 10 3 4 9 11 12 13 14 countertop section 4 Top View lower ring Top View auger tube seal Front View auger tube 6 Reference # Description Part # 1 Motor, auger (includes capacitor) 00115212 2 Brack.
VU300 dispense assembly Side View VU300 dispense assembly Top View 2 1 1 4 3 3 7 Reference # Description Part # 1 Gate, dispense 501955 2 Linkage pin, gate/solenoid 502096 3 Pin, quick release, 3".
Reference # Description Part # 1 Pump, waterbath (includes mounting plate and elbow) 00111476 2 Elbow, overflow 1" (26mm) x 3/4 MPT 502465 Not shown Elbow, clean out, drain, 3/8" (10mm) x 3/.
Beverage bath control board detail Cold carbonation level control board detail 24V AC (YEL) NO NC 24V AC (RED) C L2 (WHT) PUMP LID ready MTR COLD WARM BEV .
23.
00119628R01 02/06 801 Church Lane • PO Box D, Easton, PA 18044, USA Toll free (800) 523-9361 • (610) 252-7301 Fax (610) 250-0696 • www.follettice.
An important point after buying a device Follett 00119628R01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Follett 00119628R01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Follett 00119628R01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Follett 00119628R01 you will learn all the available features of the product, as well as information on its operation. The information that you get Follett 00119628R01 will certainly help you make a decision on the purchase.
If you already are a holder of Follett 00119628R01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Follett 00119628R01.
However, one of the most important roles played by the user manual is to help in solving problems with Follett 00119628R01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Follett 00119628R01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
