Instruction/ maintenance manual of the product TView Quad Scan Manual FOCUS Enhancements
Go to page of 34
TView QuadScan USER’S MANUAL Revision 2.00 Focus Enhancements 600 Research Drive Wilmington MA 01887 Phone: 978-988-5888 Tech Support: 978-988-5505 Fax: 978-988-7555.
TView QuadScan User's Manual 0092-5000-200 2.
TView QuadScan User's Manual 0092-5000-200 3 1 INTRODUCTION ........................................................................................................................................ 5 1.1 I NTENT OF THIS M ANUAL ...................
TView QuadScan User's Manual 0092-5000-200 4.
TView QuadScan User's Manual 0092-5000-200 5 1 Introduction The Focus Enhancements TView QuadScan product family is a series of products intended to receive analog television signals in various formats, scale them upwards in resolution and play them back on high-resolution projection devices.
TView QuadScan User's Manual 0092-5000-200 6 1.2 The QuadScan Family The QuadScan product family consists of one common technology implemented on a common circuit board. Different packaging is added to the base product to provide specific options.
TView QuadScan User's Manual 0092-5000-200 7 In addition to the above components, the user may order other cables, components and spare parts for special applications.
TView QuadScan User's Manual 0092-5000-200 8 1.3 Operational Specifications 1.3.1 Input Signal Formats 2 channels of base band NTSC or PAL (automatically recognized) composite BNC Female (1) 2 ch.
TView QuadScan User's Manual 0092-5000-200 9 1.3.5 Signal Routing Capability The A Channel of all three types of television inputs (composite, Y/C and Component) may be independently re- routed to the B-channel enabling pass through of the A signal to the B connector.
TView QuadScan User's Manual 0092-5000-200 10 1.4 Product Ordering Options 1.4.1 Ordering Guide QuadScan Products are named as follows: Name SKU Description TView QuadScan 444-5520 Desktop, Ameri.
TView QuadScan User's Manual 0092-5000-200 11 2 Installation Installation of all QuadScan products is a simple and quick procedure, but is slightly different for each of the following versions. Figure 1: QuadScan Desktop Back Plate Diagram 12-18 VDC 23 W.
TView QuadScan User's Manual 0092-5000-200 12 2.1 Quad Scan Desktop Version Installation Follow these steps to install your Desktop QuadScan. Turn all system components off. Select a convenient location for the QuadScan. Plug the QuadScan’s wallmount power supply into an appropriate outlet or power strip.
TView QuadScan User's Manual 0092-5000-200 13 the QuadScan’s Channel A or B R-Y IN connector. Connect the B-Y (or Pr) channel of the component source to the QuadScan’s Channel A or B B-Y IN connector.
TView QuadScan User's Manual 0092-5000-200 14 2.2 Quad Scan Rackmount Version Installation Follow these steps to install your rackmount QuadScan. Turn all system components off.
TView QuadScan User's Manual 0092-5000-200 15 the QuadScan’s Channel A or B R-Y IN connector. Connect the B-Y (or Pr) channel of the component source to the QuadScan’s Channel A or B B-Y IN connector.
TView QuadScan User's Manual 0092-5000-200 16 3 QuadScan Control Functions All of the powerful features of the QuadScan that can be controlled through by its three methods of control described in section 4: front panel control, RS-232/422 and IR remote control.
TView QuadScan User's Manual 0092-5000-200 17 3.2 Output Screen Aspect Ratio 3.2.1 Output Screen Aspect Ratio (Multiple) (Not Available from IR remote mouse) The Output Screen Aspect Ratio contro.
TView QuadScan User's Manual 0092-5000-200 18 3.4 Motion Processing 3.4.1 Motion Processing (Multiple) This control determines which type of video motion processing will be applied.
TView QuadScan User's Manual 0092-5000-200 19 3.5.3 Composite Pass Through (Toggle) (Not available from IR remote mouse) This control determines whether the Composite television input on Channel A is routed through to Channel B or not.
TView QuadScan User's Manual 0092-5000-200 20 3.8 Termination 3.8.1 VGA Termination (Toggle) (Not available from IR remote mouse) This control engages or disengages 75 Ohm termination resistors on the RGB lines of the VGA pass through. The default configuration is termination resistors engaged.
TView QuadScan User's Manual 0092-5000-200 21 3.10 Input Television Video Functions 3.10.1 Brightness (Range) This control adjusts the Brightness of the selected television source. Brightness is not accessible from the front panel when the selected input source is VGA pass through or AUTO.
TView QuadScan User's Manual 0092-5000-200 22 3.11 Output Window Control 3.11.1 Output Horizontal and Vertical Position (Range) (Not available from IR remote mouse) This control enables the user to position the “Output Window” with respect to the raster scan of the display device.
TView QuadScan User's Manual 0092-5000-200 23 3.12.2 Input Horizontal and Vertical Size (Range) This control enables the user to control the size of the “Input Window” with respect to the input television source. The Input Window is a smaller section of the television input that will be used as the scaling source.
TView QuadScan User's Manual 0092-5000-200 24 4 QuadScan Control Methods QuadScan models can be controlled in one of 3 different ways: Front Panel, RS-232/422, or InfraRed Remote Control. The following sections detail the use of each of these control mechanisms.
TView QuadScan User's Manual 0092-5000-200 25 4.1.1 Locking the Front Panel A special combination of buttons (the Locking Sequence) makes it possible to freeze control input such that the QuadSca.
TView QuadScan User's Manual 0092-5000-200 26 4.2 IR Remote Control The hand held IR remote control enables the user to access many of the functions of the QuadScan. Since the IR unit is intended to access the most commonly used functions, certain setup functions of the QuadScan may only be accessed via the Front Panel or via RS-232/422.
TView QuadScan User's Manual 0092-5000-200 27 Size/ Position Zoom Signal Routing Motion Processing V ideo Function Reset Figure 3: Remote Control Interface.
TView QuadScan User's Manual 0092-5000-200 28 4.3 RS-232/422 Control All of the functions detailed in section 3.1 are available from RS-232/422 control. Every QuadScan is operable in both RS-232 and RS-422, but must be correctly set up for each standard.
TView QuadScan User's Manual 0092-5000-200 29 Figure 4: Position of Jumper JP3 for RS232 or RS422 Control RS-232 RS-422 (Unterminated) RS-422 (120 Ohm T ermination) P1 FAB 0082-1100-101 U3 JP3 Y1.
TView QuadScan User's Manual 0092-5000-200 30 4.3.2 Connecting the QuadScan to communications devices Slightly different connections schemes are required for RS-232 and RS-422 operation. Figure 5 indicates the recommended connections from a DB-9 connector for RS-232 operation.
TView QuadScan User's Manual 0092-5000-200 31 4.3.3 Selecting the QuadScan’s address In an RS-422, there may be as many as 8 QuadScans operating within a system. In order to provide a control mechanism to differentiate each QuadScan, the user must program each QuadScan’s address using the Front Panel.
TView QuadScan User's Manual 0092-5000-200 32 In addition to the above commands, two additional commands are provided for control information. Writing Value Byte = 01 to register 18 will cause a Full Reset operation to occur. Writing Value Byte = 01 to register 20 will cause the existing parameter set to be written in to NOVRAM.
TView QuadScan User's Manual 0092-5000-200 33 For example, the following byte sequences perform the indicated functions: Input Set to Channel A S-VHS 7 5 13 Input Source register 5, therefore S-V.
TView QuadScan User's Manual 0092-5000-200 34 5 Appendix A - Limited Warranty FOCUS Enhancements, Inc. warrants this product against defects in materials and work manship for a period of THREE (3) YEARS from the date of original purchase. If you discover a defect, FOCUS Enhancements, Inc.
An important point after buying a device FOCUS Enhancements TView Quad Scan Manual (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FOCUS Enhancements TView Quad Scan Manual yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FOCUS Enhancements TView Quad Scan Manual - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FOCUS Enhancements TView Quad Scan Manual you will learn all the available features of the product, as well as information on its operation. The information that you get FOCUS Enhancements TView Quad Scan Manual will certainly help you make a decision on the purchase.
If you already are a holder of FOCUS Enhancements TView Quad Scan Manual, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FOCUS Enhancements TView Quad Scan Manual.
However, one of the most important roles played by the user manual is to help in solving problems with FOCUS Enhancements TView Quad Scan Manual. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FOCUS Enhancements TView Quad Scan Manual along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
