Instruction/ maintenance manual of the product Multimo 420 Flymo
Go to page of 12
For all customer enquiries or for replacement parts, contact:- 01325 300303 www .flymo.com customer .services@husqvarna.co.uk IMPOR T ANT INFORMA TION Read before use & retain for future refer.
Carton Contents P AGE 1 Multimo 340XC Multimo 360 Multimo 420 start/stop lever switchbox lock off button grassbox upper grassbox half x 2 cable clip x 2 cam lock x 4 barrel nut x 4 washer x 4 spring x.
IMPORT ANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. The Loose Parts Pack is packaged underneath the deck of the product.
P AGE 3 General 1. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety .
CABLES - IMPORT ANT • Use only 1.00mm 2 size cable up to 40 metres length maximum. Maximum rating : 1.00mm 2 size cable, 10 amps 250 volts AC. • YOUR PRODUCT IS SUPPLIED WITH AN ELECTRIC MAINS CABLE FITTED WITH A FEMALE CONNECTOR . 1. Flymo Mains Cables and Extension Cables are available from your local Approved Service Centre.
D7 D8 D6 7. Ensuring the raised markings on the Pivot Block and the deck are aligned (D5) , fold down the Cam Lock towards the Handle as illustrated in fig D6 , and continue to turn clockwise (D7) until tightened. Repeat for the other side. 8. The Cam Lock can be unlocked and locked as illustrated in fig D8 .
E2 E1 x3 E4 E5 E6 4. Fold down the Cam Lock towards the Handle as illustrated in fig E4 , and continue to turn clockwise (E5) until tightened. 5. The Cam Lock can be unlocked and locked as illustrated in fig E6 . Repeat for the other side. E3 Assembly of Upper Handles to Lower Handles 1.
P AGE 7 N grassbox empty grassbox full P1 P2 P3 P4 Using as a mulcher 1. Y our lawnmower is supplied with a mulching plug. (P1) 2. Stop your lawnmower as described in Starting and Stopping . 3. Lift safety flap and insert the mulching plug into rear discharge chute.
Cutting Height Adjustment Removing and Fitting the Blade Switch off, wait until the blade has stopped rotating and disconnect from the mains electricity supply BEFORE attempting to remove or refit the blade. Always handle the blade with care - sharp edges could cause injury .
Caring for your Lawnmower Cleaning • USE GLOVES • IMPORT ANT :- It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the deck could become a potential fire hazard. 1. Remove grass from under the deck with brush.
Environmental Information Husqvarna UK Ltd. products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner , according to company procedures, and with the potential for recycling at the end of the productsʼ life.
5100693-01 Our policy of continuous improvement means that the specification of products may be altered from time to time without prior no tice. Husqvarna UK Ltd. Aycliffe Industrial Park NEWTON A YCLIFFE Co.Durham DL5 6UP ENGLAND T elephone - (00) 44 1325 302302 Fax - (00) 44 1325 310339 EC Declaration of Conformity Husqvarna UK Ltd.
An important point after buying a device Flymo Multimo 420 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Flymo Multimo 420 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Flymo Multimo 420 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Flymo Multimo 420 you will learn all the available features of the product, as well as information on its operation. The information that you get Flymo Multimo 420 will certainly help you make a decision on the purchase.
If you already are a holder of Flymo Multimo 420, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Flymo Multimo 420.
However, one of the most important roles played by the user manual is to help in solving problems with Flymo Multimo 420. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Flymo Multimo 420 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
