Instruction/ maintenance manual of the product 350 Plus Flymo
Go to page of 9
IMPOR T ANT INFORMA TION Read before use & retain for future reference For all customer enquiries or for replacement parts, contact:- 0870 609 1901 www .
Carton Contents IMPOR T ANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY P AR TS ARE MISSING CONT A CT :- Husqvarna Outdoor Products Customer .
3. Do not use the lawnmower if the electric cables are damaged or worn 4. Immediately disconnect from the mains electricity sup- ply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected.
A Lower Handle Assembly (A) 1. Lift the grassbox lid and remove the grassbox. 2. Insert the lower handle into the handle slots, ensuring that the holes are aligned. 3. Insert the pins and secure with the retaining clips (A1) . 4. Replace the grassbox, and lower the grassbox lid carefully .
1. Start mowing the edge of the lawn nearest to the power point so the cable is laid out on the lawn you have already cut. 2. Mow twice a week during the growing season, your lawn will suffer if more than a third of its length is cut at one time and this may also result in poor collection.
Removing and fitting the Blade and F an N blade bolt blade fan spacers Removing the Blade and Fan 1. T o remove the blade bolt, hold the fan firmly and with the spanner provided loosen the blade bolt by turning it anti-clockwise (M) . 2. Remove the blade bolt, blade, spacers and fan.
Caring for y our Lawnmo wer Cleaning IMPORT ANT: It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the hood could become a poten- tial fire hazard. USE GLO VES. Switch off and remove the plug fr om the mains before cleaning.
Fails to Operate 1. Is the correct Starting procedure being followed? See ‘T o Start your Lawnmower’ 2. Is the Power T urned On? 3. Check the fuse in the plug, if blown replace. 4. Fuse continues to blow? Immediately disconnect from the mains electricity supply and consult your local appr oved Service Centre.
5107351-02 Husqvarna Outdoor Products Aycliffe Industrial Park NEWTON A YCLIFFE Co.Durham DL5 6UP ENGLAND T elephone - (00) 44 870 609 1901 Fax - (00) 44 870 609 1902 Our policy of continuous improvement means that the specification of products may be altered from time to time without prior no tice.
An important point after buying a device Flymo 350 Plus (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Flymo 350 Plus yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Flymo 350 Plus - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Flymo 350 Plus you will learn all the available features of the product, as well as information on its operation. The information that you get Flymo 350 Plus will certainly help you make a decision on the purchase.
If you already are a holder of Flymo 350 Plus, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Flymo 350 Plus.
However, one of the most important roles played by the user manual is to help in solving problems with Flymo 350 Plus. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Flymo 350 Plus along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
