Instruction/ maintenance manual of the product PORTABLE ENTERTAINER 79070 Fisher-Price
Go to page of 16
Model Number: 790 7 0 INSTRUCTIONS Please read and under stand these instructions before assembly and use. Keep these instructions for future r eference.
Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, r ather than return this product to the stor e. Usually we can solve the problem on the telephone or by sending you replacement parts.
5 / 8 " Scr ew with Was her Head – 7 SHOWN ACTUAL SIZE SHOWN ACTUAL SIZE M5 3 9 / 16 " Bolt - 2 Seat Ring Seat P ad Hub Hub Spring Spring Button Button 2 Retainers 4 Toy Ring s Toy Bar Head Base Tray Base 2 Legs 4 Screw s with Was her Heads 3 IMPORTANT! Please r emove all parts from the package and identify them before assembly .
• Rotate the legs down. • Make sure the tr eads on all four rubber feet are facing down. If the treads on all four rubber feet are not facing down, you have assembled the legs incorrectly . Remove the legs from the curved tubes (press the buttons on the legs to release them fr om the curved tubes) and re-r ead and repeat step 2.
• Fit the hubs to each side of the tray . • Hold the hubs in place. 6 Tray Hub Hub 5 • P osition the hub with the inside facing up. • Align the tab on the button with the slot in the hub. • Fit the button into the hub . • Place a spring inside the button.
6 9 OFF SP LP OFF SP LP 11 10 • Slide a retainer between the two ribs on one side of the tray , as shown. • Fit an M5 lock nut (protruding s ide facing away from the retainer) into the hexagonal hole in the retainer . • Fit a 5 / 16 " washer onto the M5 bolt.
• While pressing the upper buttons on both sides of the base, rotate the tray down until it "snaps" into position. Make sure you hear a "snap". IMPORTANT! If the tr ay does not “snap” into position, you have assembled the tray to the fr ame backwards .
• Push the seat lock to the unlocked position. • Insert and "snap" the seat into the hole in the tray . IMPORTANT! A ssembly is now complete, but you will still need to properly setup thi s product for u se.
9 • Face the front of the pr oduct • While pressing the tr ay release button (lower button) on each side of the base, rotate the tr ay up. 1 Tray Tray Release Button Tray Release Button Press Lower Button Press Lower Button • Locate the battery compartment on the bottom of the tray .
10 • Face the front of the pr oduct • While pressing the tr ay release buttons (upper buttons) on both sides of the base, rotate the tray down until it "snaps" into position.
T o prevent serious injury or death: • Never use near steps or pools, hot surfaces or areas that may be hazardous to a child. Product may move during use.
12 Base • Pus h down on both sides of the base to be sur e the legs are locked into place. 5 Pus h Down on Both Bases Leg Base Leg • While lifting the head, pull the leg down until it "snaps" into place. Make sure you hear a “snap” .
7 Low Medium High Frame Height Adjustment Button • Y ou can adjust this product to three differ ent heights for baby's comfort. Make sure baby’ s feet touch the floor . • While pressing the height adjustment button on the side of the base, lift or lower the frame to the desired position.
14 S S t t o o r r a a g g e e 9 High Frame Height Adjustment Button • Y ou must adju st the height to the highest position for storage. • While pressing the height adjustment button on the side of the base, lift the frame to the highest position.
T T o o R R e e - - a a s s s s e e m m b b l l e e t t h h e e P P a a d d • Please refer to the Assembly section, steps 13-16. 15 • Machine wash the pad in cold water and a mild detergent. Do not use bleach. Tumble dry on low heat and remove pr omptly .
16 Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. 790 7 0a-0920 ©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. Printed in China If you have any questions about this product: In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc.
An important point after buying a device Fisher-Price PORTABLE ENTERTAINER 79070 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price PORTABLE ENTERTAINER 79070 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price PORTABLE ENTERTAINER 79070 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price PORTABLE ENTERTAINER 79070 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price PORTABLE ENTERTAINER 79070 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price PORTABLE ENTERTAINER 79070, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price PORTABLE ENTERTAINER 79070.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price PORTABLE ENTERTAINER 79070. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price PORTABLE ENTERTAINER 79070 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
