Instruction/ maintenance manual of the product P9043 Fisher-Price
Go to page of 16
1 P9043 www .fi sher -price.com.
2 W ARNING P r ev ent serious injury or death from falls or sliding out: • Onl y use f or a child capable of sit ting upright unassisted. • NEVER lea v e child unat t ended. High Chair Use: • AL W A Y S secur e child with restr aint belts adjust ed t o t y our child snugly .
3 Note: Tighten and loosen all screws with a Phillips screwdriver . Do not over -tighten the screws. F ASTENERS SHOWN ACTUAL SIZE #8 x ¾" Screw with Plastic Retainer – 4 #8 x ¾" Screw .
4 • Fit a #8 x ¾" screw with retainer into the rear base and tighten. • Repeat steps 1 and 2 to assemble the other frame to the rear base. • With the Fisher -Price ® logo facing out, fit the tapered frame tube into the rear base.
5 • Lift the frame assembly upright. • Fit the footrest onto the seat support, as shown. 6 • Fit the front base into the frame tubes. 4 • Insert two #8 x ¾" screws with retainers into the holes in each frame tube and tighten. Hint: If you cannot insert the screws into the frame tubes, you have assembled the front base backwards.
6 • Unbuckle the lower restraint. 9 • Pull the waist restraint ends through the slots in the seat pad. • Fit the elastic loops on the seat pad down through the slots in the seat. • T urn the seat upside down. • Pull the elastic straps through the slots in the seat and fit the elastic straps to the pegs.
7 • T o adjust the restraint height for baby , push to remove the shoulder restraints from the seat back. 13 • Press to fasten the straps to secure the seat back pad. 12 Straps Larger Baby • Insert the ends of the shoulder belts through the upper slots in the pad and seat back.
8 • Fit the "T" end of each shoulder belt through the slots in the lower restraint. 16 Slots Assembly Seat Assembly • Place the seat assembly on the frame assembly and push to lock in place. Y ou should hear a "click" . Note: The seat assembly will only fit on the frame assembly if the chair attachment strap door is closed.
9 Securing Y our Child • T ighten each waist belt/shoulder belt so that the restraint system is snug against your child. Please refer to the next section for instructions to tighten the waist belts/shoulder belts. 2 • T o tighten the waist straps: Feed the anchored end of the waist strap up through the buckle to form a loop A .
10 Using the T ray • Fit the tray onto the seat armrests. Push down until the tray "snaps" into place. Hint: Before use, thoroughly wash all parts (the tray) that may contact food.
11 Adjusting the Seat Attaching T o An Adult Chair W ARNING P r ev ent serious injury or death from falls or sliding out: • Onl y use f or a child capable of sit ting upright unassisted. • NEVER lea v e child unat t ended. • Use restr aint belts until child is ab le t o get in and out of the pr oduct without help (about 2 1 / 2 year s old).
12 • While sliding the switch A pull the latch towards you B . Attaching T o An Adult Chair • Lift the seat off the base. 2 • Match the buckle on each strap to the matching buckle icon near each slot in the seat. Feed each strap through the matching slot on the seat.
13 Attaching T o An Adult Chair • Wrap the back straps around the back of the chair D . Buckle the straps E . Make sure you hear a "click" . Pull the free end of each strap to tighten on the chair F . • Pull up on the seat to be sure it is secure to the chair .
14 Attaching the Seat T o the Frame Door Chair Attachment Straps • T urn the seat over and open the door . Carefully fit the chair attachment straps into the compartment. 1 IMPORT ANT! Close the door completely . If you do not close the door , the seat will not fit on the high chair base.
15 Storage • The bib, toy , tray , pad, seat, seat back and restraint straps may be wiped clean using a mild cleaning solution and damp cloth. Do not use bleach.
C ANAD A Mat tel C anada Inc., 6155 F reemont Blvd.,Mississaug a, Ontar io L5R 3W2. Fisher -P r ice, Inc., a subsidiary of Matt el, Inc., East Auror a, New Y or k 1 4052, U .S.A. ©2009 Mat tel, Inc. All Rights R eser ved. ® and ™ designate U .S. trademarks of Matt el, Inc.
An important point after buying a device Fisher-Price P9043 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price P9043 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price P9043 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price P9043 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price P9043 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price P9043, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price P9043.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price P9043. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price P9043 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
