Instruction/ maintenance manual of the product M7932 Fisher-Price
Go to page of 8
IMPOR T ANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. WARNING M7932 www .fisher -price.co.uk.
2 Tighten and loosen all screws with a Phillips screwdriver . Do not over -tighten the screws. Shown Actual Size M5 x 20 mm Screw – 4 This package contains small parts in its unassembled state. Adult assembly is required. IMPORT ANT! Please remove all parts from the package and identify them before assembly .
3 IMPORT ANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
4 • Fit the seat back tube onto the ends of the base wire. • Push the seat back tube to be sure it is completely on the base wires. 5 Seat Back T ube • Fit a retainer to the outside of the seat back tube, as shown. Make sure the socket in the retainer is upright.
5 • Insert and “snap” the toy bar plugs into each socket. Hint: The toy bar is removable. Press the ends of the latches and lift the toy bar . 9 T oy Bar Plugs Sockets • Fasten the toy straps to the toy bar straps. Assembly is now complete. 10 T oy Bar Straps T oys • Fit the retainers through the side openings in the pad.
6 In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. T o avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
7 Restraint Straps Securing Y our Child • Place your child in the seat. Position the restraint pad between your child’ s legs. • Fasten the restraint straps to the restraint pad. Make sure you hear a “click” on both sides. • Check to be sure the restraint system is securely attached by pulling it away from your child.
8 Consumer Infor mation • The pad is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. T umble dry separately on low heat and remove promptly . • The frame and toys may be wiped clean using a mild cleaning solution and a damp cloth.
An important point after buying a device Fisher-Price M7932 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price M7932 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price M7932 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price M7932 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price M7932 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price M7932, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price M7932.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price M7932. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price M7932 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
