Instruction/ maintenance manual of the product 79008 Fisher-Price
Go to page of 8
2 Occasionally a consumer may experience a problem with one of our pr oducts. If this should happen, please call us toll-free, rather than r eturn this product to the stor e. Usually , we can solve the problem over the telephone or send you replacement parts.
3 P ARTS #8 - 32 x 1 / 2 " Screw - 2 Shown Actual Size 2 Flowers Butterfly 2 P addles Toy Bar Pa d Footrest Wir e Seatback Wire Right Base Wire Left Base Wire Base Connector #8 - 32 Nut - 2 Shown Actual Size 4 ASSEMBL Y • Place the base connector on a flat surface as shown.
6 ASSEMBL Y • Insert a screw thr ough the outside of each plastic cover and tighten with a Phillips screwdriver . Do not over-tighten. • Pull up on the seat back wire to be sure it is secur e. If you can remove either end of the seat back wire, you have not assembled it correctly .
8 ASSEMBL Y • Wrap the elastic str aps on the pad flaps around the out side of each plastic cover . • Hook the elastic straps to the peg on the ins ide of each plastic cover. 6 Elastic Strap Elastic Strap Inside View Elastic Strap Plastic Cover Plastic Cover Plastic Cover Pe g 7 ASSEMBL Y • P osition the pad with the ruffle upright.
10 BATTERY INST ALLATION Soothing Unit • Lift the footrest wir e. Remove the pad from the footr est wire. • Insert a coin into the battery compartment door and pry the battery compartment door off. • Insert one, size “D” (LR20) alkaline battery, as indicated inside the battery compartment.
12 SET-UP & USE Securing Y our Child • If the toy bar is attached, remove it before placing your child in the seat. • Place your child in the seat. P osition the restraint between your child’ s legs. • Fasten both belts to the buckles on each side of the restraint.
14 Seat Back Adjustment The seat back can be adjusted upright or reclined for baby’ s comfort. Reclined – Press the button on each plastic cover to lower the seat back. Hint: If your child is not seated in the seat, you will need to push the seat back at the same time you are pressing both buttons on the plastic covers .
16 To r emove the pad: • Remove the toy bar . • Lift the footrest wir e and remove the pad lower pocket. • Fit the restr aint straps back through the slots in the pad. • Slide the pad upper pocket off of the seat back wire. To r e-assemble the pad: • Refer to Assembly steps 5 and 6.
An important point after buying a device Fisher-Price 79008 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price 79008 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price 79008 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price 79008 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price 79008 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price 79008, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price 79008.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price 79008. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price 79008 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
