Instruction/ maintenance manual of the product AIR-658 Alpha Tool.Com.HK Limited
Go to page of 16
Part No: AIR-658 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www .alpha-tools.com Alpha ® Pneuma tic Air P olisher Instr uction Manual MANUAL For repair information cal.
2 T ABLE OF CONTENTS Introduction ...................................................................................................... 3 About the Symbols .......................................................................................... 3 Safety Instructions for Power T ools .
3 INTRODUCTION Thank you for purchasing an Alpha® Air Polisher . This polisher is the workhorse of a complete polishing system. A wide range of accessories help you perform many different tasks. This tool lets you grind, shape, bevel, contour and polish all kinds of granite and marble.
4 ~ or a.c. Alternating Current n0 No load speed …/min Revolution or reciprocation per minute kg Kilograms Protective Earth SAFETY INSTRUCTIONS FOR POWER T OOLS KNOW YOUR POWER T OOL. Read owner ’s manual carefully . Learn its applications and limitations as well as specifi c potential hazards particular to this tool.
5 AL W A YS SECURE WORK PIECE. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool. DON’T OVERREACH. Keep proper footing and balance at all times. DISCONNECT TOOLS WHEN NOT IN USE. Always disconnect tool before servicing; when changing accessories such as grinding wheels, backer pads, etc.
6 RECOMMENDED ALPHA ® ACCESSORIES Ceramica EX fl exible diamond polishing discs, waterproof Sandpaper discs, Hook and Loop Backed Felt Wheels, Core Drill Bits, T wistouch T urbo and Profi lers. SPECIAL FEA TURE The Alpha ® Air Polisher was designed with human engineering for operator comfort.
7 MODEL AIR-658 P ART NAMES Rubber Splash Guard Reversible Handle 10 ft W ater Hose 10 ft Air Hose Adjustable Air V alve Adjustable W ater V alve Rubber Body cover Internal W ater Line T OOL SET -UP INFORMA TION Unpack the tool carefully and study the helpful hints and warnings contained in this manual.
8 Each tool requires: 87 PSI ( 0.6Mpa / 6 bars) ; however the range of 85-90 PSI is acceptable. (6 kg / cm2) of air pressure and 15 CFM (420 l / min.) of air fl ow . We suggest a minimum of 5 HP air compressor with a holding tank of 50 cubic feet (1,400 l) capacity for one tool.
9 AIR V AL VE LEVER The valve lever controls the fl ow of air through the tool. It has two positions- ON or OFF . Run the tool at the recommended range of 85-90 PSI, with the lever pointing to the ON position. This will produce 3,500 RPM. Do not try to vary the speed.
10 SPLASH / SAFETY GUARD For operator comfort and safety , a splash guard has been provided. The guard should remain in place for all grinding and polishing operations. C-SHAPE HANDLE / REVERSIBLE SIDE HANDLE The C-Shape handle: During use with Alpha ® Core Bits and Alpha ® Profi lers, use of the “C-Shape” handle is recommended.
11 All the accessories can be purchased at a local distributor in your area. For more information concerning Alpha ® Air Polisher and factory service, please contact the Alpha ® distribution centers listed below . COMP ANY HEADQUARTERS: Alpha Professional T ools ® 103 Bauer Drive Oakland, NJ 07436 Hours of Operation : 8:30 a.
12 ALPHA ® PNEUMA TIC AIR POLISHER SCHEMA TIC 86.
13 DRA WING NO. P ART NO. DESCRIPTION QUANTTY 1 658-01 Screw M4x10 2 2 658-02 Pipe-joint Assembly 1 3 516-44 Oil Seal 1 4 A WP-21A C-shape Handle, 2 Bolts, 2 W ashers 1 9 658-09 W-pipe 1 10 658-10 Hea.
14 DRA WING NO. P ART NO. DESCRIPTION QUANTITY 47 658-47 O-Ring 2 50 658-50 V alve Lever 1 51 658-51 Hex Socket Head Screw 4 52 658-52 Silencer 1 53 516-53 Liner 1 54 658-54 Nipple 1 55 133229 W ater .
15 15 PRODUCT REGISTRA TION CARD Model No. Serial No. Company Name: ______________________________________________ Name: ______________________________________________________ Address: _______________.
Copyright © 2005 Alpha Professional T ools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www .alpha-tools.
An important point after buying a device Alpha Tool.Com.HK Limited AIR-658 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alpha Tool.Com.HK Limited AIR-658 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alpha Tool.Com.HK Limited AIR-658 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alpha Tool.Com.HK Limited AIR-658 you will learn all the available features of the product, as well as information on its operation. The information that you get Alpha Tool.Com.HK Limited AIR-658 will certainly help you make a decision on the purchase.
If you already are a holder of Alpha Tool.Com.HK Limited AIR-658, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alpha Tool.Com.HK Limited AIR-658.
However, one of the most important roles played by the user manual is to help in solving problems with Alpha Tool.Com.HK Limited AIR-658. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alpha Tool.Com.HK Limited AIR-658 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
