Instruction/ maintenance manual of the product LNS-W03 Fisher
Go to page of 14
T ype of the Cabinet (1) See P age 2 LCD PR OJECT OR LENS MODEL NO . LNS-W03 LENS REPLA CEMENT AND INST ALLA TION PR OCEDURES NO TES ON REPLA CEMENT AND INST ALLA TION The procedures and the needed pars f or lens installation depend on the type of cabinet.
Some par ts are not used f or installation or replacement. K eep these par ts f or later use. Note : Figures in this manual ma y be diff er from the actual product. NO TES ON LENS INST ALLA TION The ZOOM, FOCUS and LENS SHIFT adjustment on the T op Control or the Remote Control cannot be operated with this Lens .
LENS REPLA CEMENT AND INST ALLA TION PROCEDURE 1. Remov e screws A (2 scre ws). 2. Pull down the lo wer lens cov er while pushing the par t D , then remov e it. 3. Remov e screws B (2 scre ws). 4 . Remo ve scre ws C (2 screws) and remov e upper lens cov er .
MOUNT THE LENS CO VER. (See figure-6) INST ALL THE LENS. (See figure-4) 1 . Remov e protectiv e caps(front and back) on the lens . 2. Mount the lens on mounting brac ket of the main cabinet with 4 screws . Use the screws included with the lens . Use the driver included with the lens to f asten the screws.
1. Remov e screws A (2 scre ws). 2. Push par t B and pull Upper Lens Cov er up . 1 Fig-1 Fig-2 2 REMO VE THE UPPER LENS CO VER. (See figure-1) (At the step , inser t the light-bloc k sheet in the same position as the remov ed cov er plate has been placed.
INST ALL THE LENS. (See figure-5) 1 . Remov e protectiv e caps(front and back) on the lens . 2. Mount the lens on mounting brac ket of the main cabinet with 4 screws . Use the screws included with the lens . Use the driver included with the lens to f asten the screws.
FOCUS ADJUSTMENT Set up the projector and project image on the screen. 1. Loosen the Focus Loc k Screw on the projection lens. 2. Rotate the projection lens to obtain proper f ocus on center area of the screen. When the distance of the screen and lens is 1 meter , set ● mar k (y ellow) of the lens on F ocus Lock Scre w position.
キャビネットの形状 (2) 4ページ参照 1AA6P1P2952-- (ICYZ) 液晶プロジェクターレンズ 品番 LNS-W03 レンズ交換・取付作業手順書 ご注意：レンズを取り付け.
レンズの取り付け、または交換のあとに、お使いにならない部品が残る場合があります。 これらの部品は後日必要となる場合がありますので、大切.
1. スクリューＡ（2本）を外します。 2. レンズカバー下のD部を押さえ下方向に引いて外します。 3. スクリューB（2本）を外します。 4.
付属ドライバー レンズマウントブラケット 図4 レンズを取り付けます。 （図4参照） 3 1 . はじめにレンズに取り付けられている保護用のキャップ を外します。 （前後２ケ所） 2 .
レンズカバー上 A レンズカバー下 C カバ−プレ−ト レンズカバー上 D C B 1. スクリューＡ（2本）を外します。 2 .
図4 レンズを取り付けます。 （図5参照） 1 . はじめにレンズに取り付けられている保護 用のキャップを外します。 （前後２ケ所） 2 .
レンズカバー下 レンズカバー上 遮光プレート フラップ フラップの前面へ 差し込む フラップの前面へ 差し込む フラップ 遮光プレート上部の両サ.
An important point after buying a device Fisher LNS-W03 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher LNS-W03 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher LNS-W03 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher LNS-W03 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher LNS-W03 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher LNS-W03, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher LNS-W03.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher LNS-W03. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher LNS-W03 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
