Instruction/ maintenance manual of the product WD1001 Fisher & Paykel
Go to page of 13
Fisher & Paykel Waste Disposal User’s Guide (Models WD1001 and WD2002).
- 2 -.
- 3 - FISHER & P A YKEL W ASTE DISPOSAL - INST ALLA TION INSTRUCTIONS IMPORTANT Before you start to install your FISHER & PAYKEL Waste disposal please read all of these instructions carefully.
- 4 - UNPACKING YOUR WASTE DISPOSAL Remove the waste disposal from the packing carton, being careful not to misplace an y of the pieces. Inside the carton you should find the following: (ILLUSTRATION #2) 1. Sink Drain plug * 2. Sink Frange * 3. Sink Flange Rubber Gasket * 4.
- 5 - Then push the waste reducer up through the drain opening. (ILLUSTRATION #6) If the drain opening on your sink is covered with sealant, remove as much of the putty as possible from the rim of the sink drain hole. Unless you have a new home, be sure that the existing trap and drain lines are clear.
- 6 - MOUNTING THE DISPOSER 1. Loosen and remove the hinged clamp. (ILLUSTRATION #9). 2. The rubber splash guard should be attached to the waste disposal unit a nd not to the sink flange. Using two hands, push the disposer upwards so that the inner gr oove on the splash guard locks on to the sink flange.
- 7 - 3. Slide the waste pipe flange on to the waste pipe. 4. Attach the rubber gasket to the waste pipe so that the thin lip is facing the disposer. (ILLUSTRATION #14) 5. Insert the non-notched end of the waste pipe flange into the slot below the waste outlet on the waste disposer.
- 8 - ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS FOR A FACT ORY WIRED DISPOSER: Your FISHER & PAYKEL waste disposal is equipped with a pre-wired power cord, simply plug it in. Electrical connections should be done by a register ed electrician. Your FISHER & PAYKEL waste disposal is equipped with a standard 3 pin plug.
- 9 - SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS 1. Remove the sink drain plug 2. Turn on the cold water to a medium-high flow, allowing the water to flow into the waste disposer. 3. Turn on your waste disposer. 4. Put all food waste into the disposer while the disposer is ope rating and the water running.
- 10 - SAFETY FEATURES Your disposer is equipped with an overload protector which prevents the disposer from running should it overload. Overload generally occurs when a foreign object has fallen into the disposer and jammed the impellors, thus preventing the motor from turning.
- 11 - Express Warranty Fisher & Paykel Appliances Limited FULL TWO YEAR WARRANTY FROM DATE OF PURCHASE FISHER & PAYKEL UNDERTAKES TO Repair or, at its option, replace without cost to the owner either for material or labour any part of the product which is found to be defective within TWO YEARS of the date of purchase.
- 12 - FISHER & PAYKEL WASTE DISPO SAL INSTALLATION DIMENSIONS MODEL A B C D E WD1001 320 175 127 170 114 WD2002 312 159 127 170 114 Measurements in mm Dimensions: A. Distance from bottom of sink to bottom of disposer B. Width of disposer C. Distance from centre of disposer to centre of drain pipe D.
- 13 - We want you to be a happy satisfied customer If you need service or assistance, we suggest you follow these steps 1. Before calling for assistance: Check the things you can do yourself. Ensure that the appliance is corr ectly installed and that you are familiar with it’s normal operation.
An important point after buying a device Fisher & Paykel WD1001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher & Paykel WD1001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher & Paykel WD1001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher & Paykel WD1001 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher & Paykel WD1001 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher & Paykel WD1001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher & Paykel WD1001.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher & Paykel WD1001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher & Paykel WD1001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
