Instruction/ maintenance manual of the product 10x Allworx
Go to page of 9
Allworx TSP Installation Guide (TSP Driver 2.0.3).
No part of this publication may be reproduc ed, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise without the prior written permission of Allworx. © 2008 Allworx, a wholly owned subsidiary of PAETEC.
TSP Installation Guide 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page i Table of Contents 1 Introduction .................
TSP Installation Guide 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 1 1 Introduction The Allworx Telephony Service Provider (Allworx T SP) is a TAPI-compliant driver for MS Windows™.
TSP Installation Guide 2 Configuring the Allworx TSP driver To install the Allworx TSP driver, run the file AllworxTspSetup.exe. To configure the Allworx TSP driver, open Phone and Modem Options from the Windows Control Panel.
TSP Installation Guide The Add Provider dialog box is displayed: Select Allworx TSP and then press the Add button. The Configuration dialog will immediately display upon adding Allworx TSP.
TSP Installation Guide 2.2.1 Additional Options • Debug: used by Allworx technical support for troubleshooting • Test Configuration: verifies an Allworx server is at the IP address, the user selected is assigned an Allworx phone and validates the username and password.
TSP Installation Guide 3 Example: Using the Allworx TSP within Outlook To place an outbound call using Outlook, select a contact fro m the Contacts pane and then either: • Right mouse click on the c.
TSP Installation Guide 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 6 To configure or select the dialing rules, press the Dialing Properties… button on the Dialing Options dialog box.
An important point after buying a device Allworx 10x (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allworx 10x yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allworx 10x - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allworx 10x you will learn all the available features of the product, as well as information on its operation. The information that you get Allworx 10x will certainly help you make a decision on the purchase.
If you already are a holder of Allworx 10x, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allworx 10x.
However, one of the most important roles played by the user manual is to help in solving problems with Allworx 10x. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allworx 10x along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
