Instruction/ maintenance manual of the product GD75IA1 Fisher & Paykel
Go to page of 16
F ood waste disposer Installation instructions and user guide NZ GD75IA1 4020_Wastedisposal_UG.indd 1 10/22/08 6:21:05 PM.
4020_Wastedisposal_UG.indd 2 10/22/08 6:21:06 PM.
1 Safety and warnings 2 Installation instruc tions 3 Operating instruc tions 8 Cleaning and maintenance 9 T r oubleshooting 10 Manufacturer ’ s warranty 11 Customer care 12 Con tents Impor tant! SA VE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time.
2 Use this appliance only for its intended purpose as describe d in this User Guide. Impor tant sa fety precautions ! When using this appliance, always use basic safet y precautions, including the following: Danger! This appliance is not intended for the use by children or infirmed persons without super vision.
3 Before you begin Please read these installation instructions completely and carefully . The following installation instructions are intended as a general guide. Please ensure that the waste disposal unit is installed according to local building codes for your area.
4 1 2 3 4 5 6 7 8 10 9 11 15 14 13 12 16 17 18 1 2 3 4 5 6 7 8 10 9 11 15 14 13 12 16 17 18 Installation instruc tions Fig 1. Three Bolt Mount System Fig 1.
5 Installation instruc tions Installing the waste disposer 1 Loosen the clamp screw to allow the mounting system to be removed from the unit (fig.2). 2 T urn the mounting assembly over and remove the flange r ing from the track on the sink flange. Undo the three screws holding it together .
6 Installation instruc tions 7 Connect the discharge elbow to the lower outlet on the waste disposer (fig. 7). 8 Prior to connec ting the waste disposer to the mounting assembly , press firmly down on the rubber splash guard to check that is firmly fitted onto the neck of the hopper .
7 Installing the air-switch (optional) 1 Select a location on the bench top for the air switch to be positioned (recommended position is near the sink). Mar k and cut a hole, 33mm in diameter , in the bench top. 2 Remove the nut from the thread of the air switch (fig.
8 Operating instruc tions Operating instruc tions 1 Remove the sink stopper and turn on a medium flow of cold water . Note: Do not use hot water . Only cold water should be run through the waste disposer. 2 Press the air switch or the wall mounted switch to activate the waste disposer .
9 Y our waste disposer is self-cleaning and scours itself with each use. Under normal usage, your waste disposer will not require any special care. Note: Always run cold water into the chamber before, during and after using the waste disposer . Do not use hot water .
10 T r oubleshooting tips Problem Possible causes What to do W aste disposer is not star ting No elec tricity at the power outlet. Check that the plug is correctly connec ted and power is turned on. Check another appliance at the same outlet. Check house fuse.
11 Manufac turer’ s warranty Fisher & Paykel under takes to Repair or , at its option, replace without cost to the owner either for material or labour any par t of the Product, the serial number of which appears on the Product, which is found to be defective within TWO YEARS from the date of purchase.
12 Check the things you can do yourself . Refer to your User Guide and check: 1 your appliance is correctly installed 2 you are familiar with its normal operation If after checking these points you still need assistance, please refer to your nearest Authorised Ser vice Centre , or contact us through our local website listed on the back cover .
13 4020_Wastedisposal_UG.indd 13 10/22/08 6:21:18 PM.
Copyright © Fisher & Paykel 2008. All rights reser ved. The product specifications in this book let apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement , these specifications may change at any time.
An important point after buying a device Fisher & Paykel GD75IA1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher & Paykel GD75IA1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher & Paykel GD75IA1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher & Paykel GD75IA1 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher & Paykel GD75IA1 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher & Paykel GD75IA1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher & Paykel GD75IA1.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher & Paykel GD75IA1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher & Paykel GD75IA1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
