Instruction/ maintenance manual of the product LT 50 Allstar Products Group
Go to page of 24
1 As of date of manufacture, meets all ANSI/UL 325 Safety Requirements for Vehicular Garage Door Operators READ THIS MANUAL CAREFULLY BEFORE INSTALLATION OR USE Serial #: Date Installed: Your Dealer: INSTALLER: Place this manual in the plastic envelope prov ided and permanently attach to the wall near the pushbutton.
2 Product Features ............................................................ 3 Component Identification/Tools Required ................... 4 Section A : Assembly Instructions................................ 5 Section B: Installation Notes .........
3 PRODUCT FEA TURES The purpose of this booklet is to provide asse mbly , installation and operation inform ation concerning the A llstar LT 50 Commercial Veh icular Garage Door Openers and related Access ory Products.
4 OPENER HARDW ARE BAG STEPLADDER TAPE MEASURE W OOD BLOCK HAMMER HACKSAW 1/2” OPEN END W RENCH SOCKET W RENCH 3/8” SOCKET 7/16” SOCKET LEVEL DRILL & BITS SCREW DRIVER SMALL SCREW DRIVER (1/.
5 NOTE: T he Rail/Chain A ssembly is packaged separately f rom th e Power Head Un it. The trol ley, front i dler/ tension adjustment assembly , chain , drive gear and limit cam s are as sembled to the Rail/Chain Assembly at the factory. Follow the steps outlined below to complete assembly prior to installation.
6 WARNING! T O REDUCE THE RISK OF SEVERE INJUR Y OR DEA TH: REA D A ND FOLLOW A LL INST A LLA TION INSTRUCTIONS! WA RNING : A N UNBA LA NCED DOOR OR ONE THAT STICKS OR BINDS M A Y PREVENT TH E SENSING SYST EM FROM WORKING PROPERLY, CA USING INJURY OR DEA T H.
7 WARNING SPRINGS, PULLEYS, CABLES A ND MOUNTING HARDWA RE US ED TO BA LA NCE YOUR GA RA GE DOOR A RE UNDER EXTRE ME TENSION A T A LL TIMES A ND CA N CAUSE SEVERE INJURY OR DEA TH IF DISTURBED. DO NOT A TTEMPT A DJUSTMENT. IMPORTA NT! IDENTIFY YOUR DO OR TYPE FROM THOSE I LLUSTRA TED BELOW.
8 STEP 3 — Raise the Opener and rest the Pow er Unit on a l adder or other stu rdy support. O pen the door the full open position. Allow 2" of space betw een the Tee Rail an d the top section of the door (as shown in th e illustration, below on th e right).
9 C: INST A LLING THE OPERA TOR STEP 4: Mount Pow er Head to Ceiling: Since there is su ch variety in ceiling s tructures, all the m ounting possibilities for the Pow er Unit cannot be illustrated here. The main concern is moun ting the Power Unit securely to the ceiling joists for operatio nal strength, rigidity and safety.
10 C: INST A LLING THE OPERA TOR STEP 7: Install a Rough Service lamp bulb (75 Watt maxim um) firm ly in the light socket. L ight bulbs in Door Openers are subj ect t o vibr atio n duri ng normal op era tio n which may short en thei r life spa ns. Rough Service bulb s, availab le at most hard ware stor es, are recomm ended.
11 C: INST A LLING THE OPERA TOR OPTI ONAL SAFE F INISH PHO TOSY STEM INSTALLATIO N NOTE: Skip to Step 15 on Page 1 3 if not installing a Safe Finish Photosystem at this time. Identif y w hich side of the ga rage door opening (if any ) the sun is “li kely ” to shin e into.
12 STEP 13: CO NFIGURE MCB FO R SAFE FINI SH OR ELECTRIC EDGE O PERATIO N If you have no t instal led a Safe Finish P hot osystem or Electric Edge at this tim e proceed to Step 15 on Page 13. In order for y our Saf e Finis h Photosy stem or Elect ric Edge to work p ro per ly you m ust co nfigure the moto r control board to work w ith these devices.
13 C: INST A LLING THE OPERA TOR Step 16: Connecting the Door Arm to the Door Type 1: Door Mounted Bracket Visual ly ali gn the door arm connecting hole w ith the m iddle hole of the door bracket by rotati ng the t ube section in the appropriat e direction.
14 C: INST A LLING THE OPERA TOR Step 19: Important - Test “Opener Obstruction Sensing F eature” A. A ctivate door to the Open position . B. Place 2” x 4” laid flat on g arage floor u nder path of th e door.
15 WARNING TO PREVENT THE RISK OF PERSONA L INJURY, DA MA GE TO DOOR OR PROPERTY, ONLY OPERA TE DOOR CONTROLS WHEN DOOR IS IN CLEA R VIEW. KEEP REMOTE CONTROL A WAY FROM CHILDREN IN SECURE AREA .
16 E: AD J U S T M E N T S Adjustment #1: Opening Travel Your opener is assembled at the factory with th e trolley in the forw ard position with the open lim it stops snapped in place on the chain , set for a stan dard door. To confirm final open ing trav el adjustm ent, activ ate the opener t o bring the door t o the fully open position.
17 T O REDUCE THE RISK OF SEVERE INJUR Y OR DEA TH, REA D A ND FOLLOW A LL INSTRUCTIONS! W A RNING IMPORT A NT SA FETY INSTRUCTIONS • Ensure authorized personnel only operate the door. NEVER let children operate or play w ith door controls. Keep the Remote Control aw ay from children.
18 F: OPERA TING INSTRUCTIONS OPERATION OF YOUR OP ENER HOW TO ACTIVATE THE O PENER Never let children operate or play with the door controls. Keep Remote Control Away f or Children. Use any of the follow ing devices: 1. The Remote C ontrol Transmitter.
19 HOW TO OP ERATE THE DOO R MANUALLY - MANUAL RELEASE DISCONNECT The door should be fully closed, if possible, bef ore using the manual disconnect. Weak or broken springs could allow an open door to fall rapidly. Property damage or serious personal injury could result.
20 SA FE FINISH PHOTOSYSTEM WIRING - M ODEL LT 50 SA FE FINISH WIRING DIA GRA M / DOOR EDGE INST A LLA TION 109985 OPTI ONAL P NEUMATIC DOO R EDGE INSTALLATION In som e situ ations a pn euma tic door .
21 MA INTENA NCE SCHEDULE / INST A LLA TION CHECKLIST INSTALLATION C HECKLIST BEFORE PLACING DOOR OPERATOR IN REGULAR SERVICE, MAKE SURE THAT: 1. THE FRONT AND REAR MOUNTS FOR THE OPENER ARE SOUND AND SECURE AND THE RAIL IS POSITIO NED CORR ECTLY ABO VE THE HIGH ARC OF THE DOOR , AND THAT TH E OPENER IS POSITIONED O VER THE DOO R ACTION CENTERLINE.
22 TROUBLESHOOTING GUIDE USE EXTREME CA UTION A T A LL TIMES WHEN A TTEMPTING TO DIA GNO SE A ND RECTIFY PROBLEMS W ITH YOUR G A RA GE DO OR OPENER. BEFORE A TTEMPTING A NY SERVICE O N UNI T, DISCONNECT OPENER FROM POWER SUPPLY.
23 P A RTS BREA KDOWN & LISTING # Part # Descr iption 1 109874 Fram e 2 260584 Motor,1/2HP,A OS F42C56A29 3 110448 Motor Control Boar d 5 260570 Capac itor,53-64 MFD,250V 6 109948 Wire Harnes s, L.
24 c.p. A llstar Corp oration Dow ningtow n, PA 19335 This garage door operator is built in the USA and complies with all requirements of Underwriters Laboratories Standard UL-325.
An important point after buying a device Allstar Products Group LT 50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allstar Products Group LT 50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allstar Products Group LT 50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allstar Products Group LT 50 you will learn all the available features of the product, as well as information on its operation. The information that you get Allstar Products Group LT 50 will certainly help you make a decision on the purchase.
If you already are a holder of Allstar Products Group LT 50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allstar Products Group LT 50.
However, one of the most important roles played by the user manual is to help in solving problems with Allstar Products Group LT 50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allstar Products Group LT 50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
