Instruction/ maintenance manual of the product DS605I Fisher & Paykel
Go to page of 12
DishDra wer Integr ated panel prepar ation NZ A U GB IE DS605I and DD605I models.
Impor tant! Read these instructions completely and carefully . Ensure the product is not plugged in. Installation of DishDrawer® panels requires basic mechanic al and electrical skills. Installation must comply with your loc al building and electricity regulations.
1 Contents Double models Product prepar ation 2 Single models Product prepar ation 4 Panel Installation Badge cut-out, handle and mounting bracket 6 Securing the mounting brackets 7 Reconnecting the w.
2 (min. 311.5 mm) Pr oduc t prepar ation Double DishDra wer models A C Installation diagrams for illustr ation purposes only The following calculations assume the t op of the upper panel is aligned with the top of the adjacent cabinetry.
3 Pr oduc t prepar ation T oe kick preparation Integrated P anel material 16 -20 mm panel thickness Adequately sealed t o withstand moisture (50 O C @ 80% RH) Parts supplied Panel mounting screws (12).
4 Pr oduc t prepar ation Single DishDra wer models A B Installation diagrams for illustr ation purposes only The following calculations assume the t op of the panel is aligned with the top of the adja.
5 Pr oduc t prepar ation 9 mm Air gap 9 mm Air gap panel Use this diag ram if installing the DishDr aw er® near floor lev el. Integrated P anel material 16 -20 mm panel thickness Adequately sealed t .
6 Badge cut- out, handle and moun ting bracket 1 3 4 1 2 228.5 mm 228.5 mm 127 mm 211 mm 54 mm 127 mm 30 mm 25 mm Impor tant! Ensure the product is not plugged in Installation diagrams feature double .
7 Securing the mounting brackets 1 1 2 3 2 16 mm x6 3 4 Double models only: Impor tant! Break off the tab at the top of the Low er Mounting Brack et.
8 Reconnecting the wires and tting the panels and a custom toe kick (double models only) 1 2 2 2 1 16 mm x5 5 6 Impor tant! Ensure the rubber seal between the drawer and panels is k ept in place 1.
9.
Copyright © F isher & Pa ykel 2007. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at an y time.
An important point after buying a device Fisher & Paykel DS605I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher & Paykel DS605I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher & Paykel DS605I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher & Paykel DS605I you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher & Paykel DS605I will certainly help you make a decision on the purchase.
If you already are a holder of Fisher & Paykel DS605I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher & Paykel DS605I.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher & Paykel DS605I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher & Paykel DS605I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
