Instruction/ maintenance manual of the product DISHDRAWER DD603I Fisher & Paykel
Go to page of 12
open 5 / 16 (8mm) gap between panels BEFORE YOU ST ART FOR INTEGRA TED DOUBLE MODELS DD603I (NOTE: FOR SINGLE R MODELS, REFER TO BACK OF THIS BOOK) DOUBLE R INTEGRA TED P ANEL PREP ARA TION part numbe.
BEFORE YOU ST ART P ARTS SUPPLIED INTEGRA TED P ARTS KIT part no. 526674 P anel Preparation Booklet (1) TOOLS NEEDED Safety Glasses, T ape Measure, P encil, Needle-Nose Pliers, Drill & Phillips Bit or Phillips Screwdriver , ø 1” (25.4mm) Boring Bit or ø 1” (25.
R READ THESE INSTRUCTIONS COMPLETEL Y AND CAREFULL Y . BADGE AND HANDLE POSITIONS On both P anels, select the Badge position to suit the cabinetry design, within the available badge zones. The Badge may be centered on the edge of the badge zone. The handle position will also need to be taken into account.
FITTING THE HANDLE Fit the customer supplied handle. WARNING! When mounting the handle, be sure fastenings do not protrude beyond the back surface of the P anel. FITTING THE BADGE Fit a Badge to each P anel by feeding the wires through to the back and pressing the Badge into the cut out.
R P ANEL PREP ARA TION INSTRUCTIONS STEP 5: SECURING THE TOE KICK P ANEL STEP 6: GROUNDING THE MOUNTING BRACKETS AND CONNECTING THE BADGE WIRES WARNING! Be sure the Product is not plugged in. Important! The Badge Isolator Board is an electrostatic sensitive device.
R P ANEL PREP ARA TION INSTRUCTIONS STEP 7: FITTING THE P ANELS TO THE PRODUCT 6 Fit the assembled P anels by sliding in an inwards and upwards motion. The rubber seal between the Drawer and P anels must be kept in place. Secure the P anels by inserting the pins on either side of the Drawer .
open 3 / 8 (9mm) gap between panels BEFORE YOU ST ART FOR INTEGRA TED SINGLE MODELS DS603I (NOTE: FOR DOUBLE MODELS, REFER TO BACK OF THIS BOOK) SINGLE INTEGRA TED P ANEL PREP ARA TION part number 526.
BEFORE YOU ST ART IMPORT ANT INTEGRA TED P ANEL THICKNESS P anel minimum thickness is 16mm. Panel thicknesses above 18mm can be accommodated but product depth will increase accordingly . INTEGRA TED P ANEL MA TERIAL Drawer Front material must be suitable for damp conditions (122 o F/50 o C @ 80% RH) or adequately sealed to withstand moisture.
READ THESE INSTRUCTIONS COMPLETEL Y AND CAREFULL Y . BADGE AND HANDLE POSITIONS On both P anel, select the Badge position to suit the cabinetry design, within the available badge zone. If required, the Badge may be centered on the edge of the badge zone.
P ANEL PREP ARA TION INSTRUCTIONS 4 The Mounting Bracket is directly screwed to the back of the Integrated P anel. On a soft surface centralize and align the Mounting Bracket on the P anel. Important! For some materials pilot holes may need to be drilled first before screwing the Mounting Bracket onto the P anel.
P ANEL PREP ARA TION INSTRUCTIONS STEP 5: GROUNDING THE MOUNTING BRACKETS STEP 6: CONNECTING THE BADGE WIRES WARNING! Be sure the Product is not plugged in.
P ANEL PREP ARA TION INSTRUCTIONS STEP 7: FITTING THE P ANELS TO THE PRODUCT 6 Fit the assembled P anel by sliding in an inwards and upwards motion. The rubber seal between the Drawer and P anel must be kept in place. Secure the P anel by inserting the pins on either side of the Drawer .
An important point after buying a device Fisher & Paykel DISHDRAWER DD603I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher & Paykel DISHDRAWER DD603I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher & Paykel DISHDRAWER DD603I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher & Paykel DISHDRAWER DD603I you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher & Paykel DISHDRAWER DD603I will certainly help you make a decision on the purchase.
If you already are a holder of Fisher & Paykel DISHDRAWER DD603I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher & Paykel DISHDRAWER DD603I.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher & Paykel DISHDRAWER DD603I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher & Paykel DISHDRAWER DD603I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
