Instruction/ maintenance manual of the product DD90S(H)TI Fisher & Paykel
Go to page of 8
Impor tant! SA VE THESE INSTRUCTIONS The models shown in this document may not be available in all mark ets and are subject to change at any time. F or current details about model and specification availability in your country , please visit our local website listed at the end of this document or contact your loc al Fisher & P aykel dealer.
The following calculations assume the t op of the panel is aligned with the top of the adjacent cabinetry : width of the panel Measure A ( the width between adjacent door/drawer fr onts) and write it in the rst box below , then complete the equation.
P AR TS SUPPLIED ZONE RE QUIRED FOR B ADGE REMO VE P ANEL BRACKET & DET A CH BADGE 3 45 Panel mounting screws (14) Supplied separately Attached to product Integrated rectangular badge (1) (Satin c.
ROUTE B ADGE THROUGH P ANEL RE CONNE CT BADGE REA TT A CH P ANEL SE CURE P ANEL BRACKET T O P ANEL 6 89 7 1 2 1 2 ⁄” (16 mm) x14 1 2 Electrical Shock Hazard WARNING ! Connect the integrated badge ground (earth) wire to one of the two tabs provided on the panel bracket.
If , af ter installation, the front panel of your DishDraw er is not correctly aligned with the front panels of surrounding cabine try , it can be adjusted as follows.
DET A CH CONTROLS L OOSEN P ANEL BRACKETS REMO VE FRONT P ANEL 45 3 2 DISCONNE CT FROM PO WER SUPPL Y Electrical Shock Hazard WARNING ! Disconnect the DishDrawer from the pow er supply. F ailure to follow this warning may result in electrical shock, injur y or re.
SLIDE BRA CKETS TO SUIT ABLE HEIGHT SET TING RE CONNE CT CONTR OLS REA TT ACH P ANEL TIGHTEN P ANEL BRACKETS 6 89 7 1 2 Electrical Shock Hazard WARNING ! Connect the ground (earth) wire of the controls to one of the two tabs provided on the panel bracket.
RE CONNE CT THE POWER SUPPL Y 10 www . sherpaykel.com www . sherpaykel.ca www. sherpaykel.co .nz w ww . sherpaykel.com.au www. sherpaykel.co .uk w ww . sherpaykel.ie 590018A US CA NZ AU GB IE 03.10 (2,2) -2- 590018A DD36SDD90S DoorPanelPrep USCANZGB.
An important point after buying a device Fisher & Paykel DD90S(H)TI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher & Paykel DD90S(H)TI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher & Paykel DD90S(H)TI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher & Paykel DD90S(H)TI you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher & Paykel DD90S(H)TI will certainly help you make a decision on the purchase.
If you already are a holder of Fisher & Paykel DD90S(H)TI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher & Paykel DD90S(H)TI.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher & Paykel DD90S(H)TI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher & Paykel DD90S(H)TI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
