Instruction/ maintenance manual of the product DD24DT Fisher & Paykel
Go to page of 9
DishDra wer® Installation instructions DD24D T models US CA Impor tant! SA VE THESE INSTR UCTIONS The models shown in this document may not be available in all mark ets and are subject to change at any time. F or current detail s about model and specification availability in your c ountry, please go to our website www.
Product dimensions (inches (mm)) Pre nished L CD DD24DT Pre nished Flat door DD24DT Integrated DD24DT A overall height* of product 34 - 36 ⁄” (863.
2” x 4” P ARTS SUPPLIED Clamp (1) Wire clip (2) Phillips 16 mm screws (9) Drain hose support (1) Moisture protection tape (1) (to prevent moisture damage) Drain hose joiner (1) To p mounting brack.
30 mm 3 2 1 4 5 6 7 7 8 8 13 17 14 15 15 16 9 12 11 11 10 A Ensure the draw er is removed and then rotated count er- clockwise to prevent kinked hoses. Before r efitting the drawer , ensure the hoses are not twisted and the latches at the rear of each draw er runner are facing for ward.
1 2 ROUTE THE HOSES 7 OR Tie together to avoid kinking. (1,1) -2- 599632C DD24D TALL installA2 USCA.indd 15/4/09 11:51:16 AM (1,1) -2- 599632C DD24D TALL installA2 USCA.
2 1 1 3 3 optional (x2) 30 mm 1 2 3 4 5 5 5 ” ( 150 mm) 2 1 1 3 3 optional optional (x2) If top mounting brackets are being used, ensure they’r e securely fitted before sliding pr oduct into cavity. If top mounting brackets are being used, ensure they’r e securely fitted before sliding pr oduct into cavity.
OPTIONAL 1 2 3 4 4 optional max. ¾ ” (19 mm) 4 3 5 19 19 9 1 2 8 6 7 2 1 4 5 4 3 x 4 1 2 3 A C C B B A 1 Ensure product is level and aligning with cabinetry. Using the most appropriate length Hexagonal socket supplied, fully extend levelling feet up to r equired distance by hand.
29 ½” - 34 ¾” (750 - 882.5 mm) 1 ½” (38 mm) 1 max. 4 ¾” (120 mm) 2 1 6 5 4 7 2 29 ½” - 34 ¾” (750 - 882.5 mm) 1 3 6 5 4 5 6 5 4 5 A If space is limited for fixing, push hose through drain hose support to required height DishDraw er® with W aste Disposal 29 ½ ” - 34 ¾ ” ( 750 - 882.
Check all parts are installed. Ensure product is level , securely fastened to the cabinetry and opens and closes freely . The DishDrawer® must be free t o fully close with no resistance from the cabinetr y . Ensure inlet hose to water supply has rubber washer fitt ed and is tightened a fur ther half turn after seal contact.
An important point after buying a device Fisher & Paykel DD24DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher & Paykel DD24DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher & Paykel DD24DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher & Paykel DD24DT you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher & Paykel DD24DT will certainly help you make a decision on the purchase.
If you already are a holder of Fisher & Paykel DD24DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher & Paykel DD24DT.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher & Paykel DD24DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher & Paykel DD24DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
