Instruction/ maintenance manual of the product 2WSHLCD-5P Firstech, LLC.
Go to page of 22
HRw@YPPmh@rI RwYPPfmrMR MUp HRw@s@h@lcd@rIMus@s RwshlcdMUp t@@.
By Firstech, LLC 2 t@o@c t@o@c i T kHI@c T w.
5 By Firstech, LLC By Firstech, LLC 4 Introduction Kit(s) Contents Thank you for purchasing a CompuStar system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the following manual.
7 By Firstech, LLC By Firstech, LLC 6 Remote Reference 2W900FMR-2nd-5P (2-W ay 900MHz) Applicable to the following models 2W900FM -AS(DT) (alarm and remote start) 2W900FM -A(DT) (remote start w/out al.
9 By Firstech, LLC By Firstech, LLC 8 Quick Reference When servicing or loaning your vehicle to others, the CompuStar system should be placed in Valet Mode. Valet Mode prevents the system from remote starting and disables all alarm functions. IMPORT ANT : While in Valet mode the CompuStar will still lock and unlock power lock systems.
11 By Firstech, LLC By Firstech, LLC 10 Quick Reference STEP 1 : Enter remote programming mode by holding down buttons (II + III) for 2.5 seconds. The remote will beep once and the LCD will read “Prog” to indicate that you have successfully entered programming mode.
13 By Firstech, LLC By Firstech, LLC 12 Quick Reference Rw@r@b@f Quick Reference Qw@r@b@f Button Duration Additional Programming Function / Description Required 0.
By Firstech, LLC 14 15 By Firstech, LLC Quick Reference Qw@r@b@f Remote LCD(liquid crystal display) Diagram and lcons If you would like additional information on the functionality of your 1way companion remote, please visit the support page at www.
By Firstech, LLC 16 17 By Firstech, LLC c@iM Remote LCD(liquid crystal display) Diagram and lcons Lock/Arm - Unlock/Disarm This icon indicates whether the system is locked/armed or unlocked/disarmed. While armed, the system will monitor the doors, trunk, hood, shock sensor, and aux inputs.
By Firstech, LLC 18 19 By Firstech, LLC a@iM Remote LCD(liquid crystal display) Diagram and lcons Siren This icon will be displayed if the siren is turned on. Turning the siren off only applies to the chirps when arming, disarming, or remote-starting.
By Firstech, LLC 20 21 By Firstech, LLC a@iM Remote LCD(liquid crystal display) Diagram and lcons Shock Sensor Bypassed This icon will be displayed when the shock sensor is bypassed by pressing buttons I+III for 2.5 sec. Impact to the vehicle will not be detected at this time.
By Firstech, LLC 22 23 By Firstech, LLC General System Functions General System Functions Tap button (I) for 0.5 seconds to lock/arm and unlock/disarm. If your vehicle is locked, tap button (I) to unlock; if your vehicle is unlocked, tap button (I) to lock.
By Firstech, LLC 24 General System Functions Activating Reservation Mode STEP1 : While the vehicle is running, place the transmission in neutral, set the emergency / parking brake, and remove pressure from the foot brake. STEP2 : Remove the key from the vehicle s ignition.
27 By Firstech, LLC By Firstech, LLC 26 General System Functions t@@b@q When in range of your vehicle, the remote will display the vehicle’s temperature and vehicle battery voltage upon tapping button (IV).
29 By Firstech, LLC By Firstech, LLC 28 Advanced System Functions d@l@O@i@c@d@l Tap buttons (I+IV) simultaneously for 0.5 seconds to turn on and off drive lock (also known as ignition controlled door locks).
31 By Firstech, LLC By Firstech, LLC 30 Advanced System Functions c@c@O@rps@Hr@p@sI The RPS is an optional feature. The car call/RPS feature uses a remote paging sensor that is designed to be mounted on the inside of the windshield.
33 By Firstech, LLC By Firstech, LLC 32 Advanced System Functions s@v@s The optional Secure Valet Switch prevents the alarm from being put into valet mode through cycling the ignition on/off five times.
35 By Firstech, LLC By Firstech, LLC 34 a@j@m@ The CompuStar systems have a built in mode that would require you to keep your remote separate from your key chain. This featur e also requires additional labor. Please consult your installer for more details.
37 By Firstech, LLC By Firstech, LLC 36 p@@RwYPPfmrMR MUp STEP 1 : Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7 seconds. The vehicle s parking lights will flash once with the successful completion of this step.
39 By Firstech, LLC By Firstech, LLC 38 While the alarm is armed, the LED will blink slowly. While the siren is going off, the LED will indicate the specific zone that was triggered. Upon disarming the alarm after it has been triggered, the amount of siren chirps will indicate the specific zone.
41 By Firstech, LLC By Firstech, LLC 40 Firstech, LLC. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR.
43 By Firstech, LLC By Firstech, LLC 42 Notes Notes.
An important point after buying a device Firstech, LLC. 2WSHLCD-5P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Firstech, LLC. 2WSHLCD-5P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Firstech, LLC. 2WSHLCD-5P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Firstech, LLC. 2WSHLCD-5P you will learn all the available features of the product, as well as information on its operation. The information that you get Firstech, LLC. 2WSHLCD-5P will certainly help you make a decision on the purchase.
If you already are a holder of Firstech, LLC. 2WSHLCD-5P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Firstech, LLC. 2WSHLCD-5P.
However, one of the most important roles played by the user manual is to help in solving problems with Firstech, LLC. 2WSHLCD-5P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Firstech, LLC. 2WSHLCD-5P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
