Instruction/ maintenance manual of the product UV-500C Field Controls
Go to page of 4
UV-AIRE™ AIR PURIFYING SYSTEM Mode l: UV-500C READ THESE INSTRUCTIONS CAREFULLY AND COMPLETE LY BEFORE PROCEEDING WITH THE INSTALLATION LEAVE THE INSTALLATION INSTRUCTIONS WITH THE OWNER/OPERATOR OF THE DEVICE AFTER OPENING THE CARTON, UNPACK AND INSPECT THE UNIT AND LAMP FOR DAMAGE.
Page 2 I. INDICATION FOR USE This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or co ndition nor for use in the mitigation, treatment, or pr evention of any disease or condition. II. GENERAL INFORMATION Model Volts Amps Hz Watts Lamp Intensity at 1 meter Recommended Max Sq.
Page 3 10. Slide the filter drawer out of the base. Remove one the four filters from its plastic bag and place it in the drawer with arrow/carbon side u p. (See Figure 6) 11. Slide the filter drawer with filter back into the base unit. Press firmly until drawer catches.
Page 4 3. Disconnect t he lamp connection, then rotate l amp-mounting knob counter-clockwi se and pull the lamp out of the unit. (See Figure 10 & 11) 4.
An important point after buying a device Field Controls UV-500C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Field Controls UV-500C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Field Controls UV-500C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Field Controls UV-500C you will learn all the available features of the product, as well as information on its operation. The information that you get Field Controls UV-500C will certainly help you make a decision on the purchase.
If you already are a holder of Field Controls UV-500C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Field Controls UV-500C.
However, one of the most important roles played by the user manual is to help in solving problems with Field Controls UV-500C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Field Controls UV-500C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
