Instruction/ maintenance manual of the product TDK 15.6 Festool
Go to page of 20
1 465 297_002 Manual de instrucciones Página 14 - 19 IMPORTANTE: Lea y comprende todas las instrucciones antes de usar. Guide d’utilisation Page 8 - 13 IMPORTANT: Lire et comprendre toutes les instructions avant de démarrer les travaux. Instruction manual Page 2 - 7 IMPORTANT: Read and understand all instructions before using.
2 GENERAL SAFETY RULES Read and understand all instructions . F ailure to follow all instructions listed below , may result in electric shock, fire and/or serious personal injury . SAVE THESE INSTRUCTIONS Work area 1 Keep your work area clean and well lit.
3 Technical data Cordless drill/screwdriver TDK 12 TDK 15.6 Motor voltage 12 V 15.6 V Idle-running speed • 1. speed 0 – 430 rpm 0 - 450 rpm • 2. speed 0 – 1400 rpm 0 - 1500 rpm Max torque • Soft case 20 Nm 25 Nm • Hard case 28 Nm 36 Nm Adjustable torque • 1.
4 Wall mounting LC 45 The charger LC 45 has two longitudinal slots on its rear by which it can be suspended on walls using two screws (e.g. button-headed or flat head screw with a shaft diameter of 5 mm). Screw both screws into the wall 96 mm apart until the screwhead is protruding from the wall by appro x.
5 - Pull the unlocking ring (2.3) forwards, press the chuck onto the drill spindle up to the stop and release the unlocking ring. R emo v al: - Pull the unlocking ring forwards and remove the chuck. Changing tools: - T urn the clamping sleeve (2.2) anti-clockwise to open the clamping jaws (2.
6 LED red – steady: temperature of battery pack is outside permissible limit. It is essential that you read the instructions in the Chapter „Maintenance - Care“. Bit storage well Y ou can insert several bits or bit extensions into the bit magazine (4.
7 Warranty Conditions of 1+2 Warranty Y ou are entitled to a free extended warrant y (1 year + 2 years = 3 years) for y our Festool power tool. Festool shall be responsible for all shipping costs during the first year of the warranty . During the second and third year of the warranty the customer is responsible for shipping the tool to Festool.
8 RÉGLES DE SÉCURITÉ GÉNÉRALES Vour devez lire et comprendre toutes les instructions. Le non- respect, même partiel, des instructions ci-après entraîne un risque de choc électrique, d’incendie et/ou de blessures gr aves. CONSERVEZ CES INSTRUCTIONS Aire de travail 1 Veillez à ce que l’aire de travail soit pro- pre et bien éclairée.
9 Caractéristiques techniques Perceuse-visseuse TDK 12 TDK 15.6 T ension du moteur 12 V 15.6 V Vitesse à vide: • 1 ère vitesse 0 – 430 tr/min 0 - 450 tr/min • 2 ème vitesse 0 – 1400 tr/min 0 - 1500 tr/min Couple max.
10 Le chargeur LC 45 convient au chargement de la batterie utilisée. Seul l’utilisateur est tenu responsable des dommages qui résulteraient d’une utilisation non conforme aux prescriptions.
11 Mandrin de perceuse BF-FX Le mandrin de perceuse sert à serrer les forets et les embouts. Montage : - Placez le mandrin de perceuse sur l'axe (2.5) puis tournez-le jusqu'à ce que le six pans (2.4) du mandrin de perceuse s'enclenche dans le logement de l'axe.
12 Si vous utilisez un pack d’accumulateurs NiMH chaud (>37°C), il sera seulement chargé a vec un courant de charge réduit. Dans ce cas, le temps de charge sera prolongé. La DEL (3.2) indique à chaque fois l’état de service du chargeur. DEL jaune - éclairage continu: le chargeur est prêt à fonctionner .
13 - Dévissez le cache (5.4) et déposez les anciens charbons. - Appuyez sur la tôle de maintien (5.3) des nouveaux charbons jusqu’à ce qu’elle s’enclenche dans les encoches (5.1), avant de revisser le couvercle. - Faites tourner la machine à vide pendant quelques minutes pour que les nouveaux charbons prennent bien leur place.
14 NORMAS GENERALES DE SEGURIDAD Lea y entienda todas las instrucciones. El incumplimiento de una sola de las instrucciones aquí listadas, puede tener como resultado una descarga eléctrica, fuego y/ o lesiones personales serias. CONSERVE ESTAS INSTRUCCIONES Espacio de trabajo 1 Mantenga su espacio de trabajo limpio y bien iluminado.
15 Datos técnicos Taladro atornillador TDK 12 TDK 15.6 Potencia del motor 12 V 15.6 V V elocidad en vacío: • 1ª marcha 0 - 430 rpm 0 - 450 rpm • 2ª marcha 0 - 1400 rpm 0 - 1500 rpm Par de apri.
16 • Botón apretado de izquierda a derecha = el taladro atornillador gira hacia la izquierda; • Botón en posición media = bloqueo de conexión. Conmutación del engranaje ¡Conectarlo sólo con la máquina parada! Con el interruptor desplazable (1.
17 Portabrocas BF-FX El portabrocas sirve para sujetar las brocas y las puntas de destornillador . Montaje: - Coloque el portabrocas en el husillo portabrocas (2.5) y gírelo hasta que la clavija hexagonal (2.4) del portabrocas se enclave en la toma hexagonal interior del husillo portabrocas.
18 El tipo de acumulador empleado (NiCd o NiMH) lo detecta el cargador automáticamente. El proceso de carga lo controla un micro-procesador . Si se emplea un acumulador de NiMH en estado caliente (>37°C), se carga sólo con corriente de carga reducida.
19 - Desatornillar la protección (5.4) y retirar las escobillas desgastadas. - Presionar la chapa de soporte (5.3) de las nuevas escobillas hasta que se encla ven en las entalladuras (5.
20.
An important point after buying a device Festool TDK 15.6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Festool TDK 15.6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Festool TDK 15.6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Festool TDK 15.6 you will learn all the available features of the product, as well as information on its operation. The information that you get Festool TDK 15.6 will certainly help you make a decision on the purchase.
If you already are a holder of Festool TDK 15.6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Festool TDK 15.6.
However, one of the most important roles played by the user manual is to help in solving problems with Festool TDK 15.6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Festool TDK 15.6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
