Instruction/ maintenance manual of the product DTS 400 Q Festool
Go to page of 16
1 469 535_001 Manual de instrucciones Página 12 - 16 IMPORTANTE: Lea y comprende todas las instrucciones antes de usar. Guide d’utilisation P age 7 - 11 IMPORTANT: Lire et comprendre toutes les instructions avant de démarrer les travaux. Instruction manual P age 2 - 6 IMPORTANT: Read and understand all instructions before using.
2 General safety rules Read and understand all instruc- tions. Failure to follow all instructions listed below may result in electric shock, fi re and/ or serious personal injury. SAVE THESE INSTRUCTIONS 1) Work area safety a) Keep work area clean and well lit.
3 Symbols V volts A amperes Hz hertz W watt ~ alternating current n 0 no load speed Class II Construction rpm revolutions per minute spm strokes per minute Intended use The sanders are designed for sanding wood, plas- tic, composite materials, paint / varnish, fi lling material and similar materials.
4 The switch (1.1) acts as an ON / OFF switch (I = ON / 0 = OFF). 1.1 Electronic control ELECTRONIC The D TS 400 EQ has an electronic control with which the rotational speed can be varied step-free. This allows the sanding speed to be adapted to the optimum level according to the material concerned (see "W orking with the tool").
5 Always use original F estool sanding materials! Working with the tool Always secure the workpiece in such a manner that it cannot move while being sanded. Never ov erload the tool by using too much pressure! The best sanding results are achieved when applying moder ate pressure.
6 only to the original consumer purchaser , that the specifi ed tool will be free from defects in materials and workmanship for a term of one year from the date of procurement. F estool makes no other warr anty , express or implied, for Festool portable power tools.
7 Régles de sécurité générales Assurez-vous de lire et de bien com prendre toutes les instructions. Le non-respect, même partiel, des instructions ci- dessous peut entraîner un risque de choc électri- que, d’incendie et/ou de blessures gra ves.
8 Symbole V V olt A Ampère Hz Hertz W W att ~ T ension alternative n 0 Vitesse de rotation à vide vous tr av aillerez mieux et avec plus de sécurité à la vitesse pour laquelle il est prévu. b) N’utilisez pas un outil électroportatif dont l’interrupteur est défectueux.
9 et des matériaux similaires. Les métaux et du matériau comportant de l’amiante ne doivent pas être usinés. En raison de sa taille, de son poids et de sa puis- sance, la machine est adaptée notamment au traitement de petites surfaces ainsi qu’aux tr avaux au-dessus de la tête.
10 place du dispositif d’auto-aspir ation. Pour ce faire, le fl exible d’aspiration (Ø 27 mm (4.1)) de l’aspi- rateur est monté sur le manchon d’aspir ation. 4.1 Fixer l’abrasif Stickfi x est un système de fi xation de type auto-agrippant.
11 permet de protéger et de ranger des outils et des appareils complémentaires. Les Systainer sont empilables et peuvent être solidarisés. En outre, il se fi xent sur les aspirateurs CT F estool.
12 Normas generales de seguridad Lea y entienda todas las ins- trucciones. El incumplimiento con las instruccio- nes aquí referidas puede resultar en una descarga eléctrica, fuego y/o lesiones personales serias. CONSERVE ESTAS INSTRUCCIONES 1) Seguridad del espacio de trabajo a) Mantenga limpio y bien iluminado su puesto de trabajo.
13 ~ rensión alterna n 0 revoluciones por minuto en v acío Clase II Construcción rpm revoluciones por minuto opm orbitas por minuto Símbolos V voltios A amperios Hz hertzios W vatios 4) Uso y cuidado de la herramienta a) No sobrecargue el aparato.
14 Uso conforme a lo determinado En cuanto a su determinación de uso, las lijador as están previstas para el lijado de mader a, plástico, materiales compuestos, pintura/barniz / nogalina, masilla de emplaste y materiales similares. Con este útil no se deben trabajar metales ni mate- riales que contengan amianto.
15 Dispositivo de aspiración ex- terna, con aspirador A fi n de evitar un frecuente cambio del turbofi ltro durante tr abajos de lijado relativamente largos, en lugar del dispositivo autoaspir ador se puede conectar un aspirador F estool. Par a ello se cala el tubo fl exible de aspiración (Ø 27 mm (4.
16 Accesorios, herramientas ¡P or razones de seguridad, sola- mente deben emplearse accesorios y herramien- tas originales de F estool! Los números de pedido para los respectiv os accesorios y herramientas se encuentr an en su catálogo F estool o en la Internet, www.
An important point after buying a device Festool DTS 400 Q (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Festool DTS 400 Q yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Festool DTS 400 Q - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Festool DTS 400 Q you will learn all the available features of the product, as well as information on its operation. The information that you get Festool DTS 400 Q will certainly help you make a decision on the purchase.
If you already are a holder of Festool DTS 400 Q, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Festool DTS 400 Q.
However, one of the most important roles played by the user manual is to help in solving problems with Festool DTS 400 Q. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Festool DTS 400 Q along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
