Instruction/ maintenance manual of the product SPL-6000P Fender
Go to page of 7
Power Amplifiers Fr om Fender Pr o Audio Owner's Manual for SPL-6000 P/N 038866.
This procedure applies to stereo, mono, or bridged opera- tion into a full-range loudspeaker system which uses a pas- sive high-level crossover (or none at all).
1. FRONT P ANEL A - PEAK LED INDICATOR The red Peak LED Indicator illuminates when the output volt- age of the amplifier reaches clipping (maximum output volt- age). The threshold for the peak indicator automatically adjusts for load impedance and supply voltage variations.
G - MODE SELECT MONO BRIDGED/STEREO This two-position switch (left rear panel) selects either the mono bridge or normal stereo mode. With the button in the "in" position, the amplifier is in the mono bridged mode.
Power and audio signal cables are the most common sources of sound system failure. Well-made and carefully maintained cables are essential to the reliability of the entire system.
CAUTION: NEVER use coiled cords for speaker hookup, even in an emergency. Coiled guitar-type cords usually have higher internal resis- tance than the speakers themselves. This is due to the light-gauge wire used to keep the coil cords flexible. These cords will prevent most of the power from reaching the speakers.
SPECIFICA TIONS DESIGNATION TYPE PR 200 OUTPUT POWER Stereo Continuous sine wave output power, both channels driven +/- 1dB, 20 Hz to 20kHz, THD < 0.
An important point after buying a device Fender SPL-6000P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fender SPL-6000P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fender SPL-6000P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fender SPL-6000P you will learn all the available features of the product, as well as information on its operation. The information that you get Fender SPL-6000P will certainly help you make a decision on the purchase.
If you already are a holder of Fender SPL-6000P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fender SPL-6000P.
However, one of the most important roles played by the user manual is to help in solving problems with Fender SPL-6000P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fender SPL-6000P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
