Instruction/ maintenance manual of the product PR258 Fender
Go to page of 4
THE SOUN D THA T CREA TES LEGENDS P/N 047277 Owner , s Manual Bronco Amp TYPE: PR 258.
The Fender BRONCO amplifier is a unique combination of radical new distortion sounds and time tested Classic Fender sounds, packaged together in a solid-state configuration which is both easy to use and inherently reliable.
A. INPUT — A high impedance, high sensitivity plug-in connection for instruments. B. NORMAL VOLUME — Adjusts the overall loudness of the Normal Channel. C. GAIN — Adjusts the amount of preamp amplification in the Drive Channel . Cleaner sound is achieved at lower gain settings; high gain settings will produce more sustain and distortion.
Bronco Specifications PART NUMBER: 120V VERSION: 22-3104 230V VERSION: 22-3164 INPUT IMPEDANCE: Greater than 1 Meg Ohm NOMINAL INPUT LEVEL: 100 mV POWER OUTPUT: 15 Watts R.M.S. RATED LOAD IMPEDANCE: 8 Ohms POWER REQUIREMENTS: 120V VERSION: 120 VAC 60 Hz.
An important point after buying a device Fender PR258 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fender PR258 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fender PR258 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fender PR258 you will learn all the available features of the product, as well as information on its operation. The information that you get Fender PR258 will certainly help you make a decision on the purchase.
If you already are a holder of Fender PR258, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fender PR258.
However, one of the most important roles played by the user manual is to help in solving problems with Fender PR258. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fender PR258 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
