Instruction/ maintenance manual of the product CS-18 Fender
Go to page of 8
Fr om Fender Pr o Audio Owner's Manual for CS-18 Subwoofer P/N 051342 REV A CONTRACTOR SERIES LOUDSPEAKER SYSTEMS CONTRACTOR SERIES LOUDSPEAKER SYSTEMS.
Fender Musical Instruments 7975 North Hayden Road, Scottsdale, Arizona 85258 U.S.A. Fender knows the importance of sound reinfor cement. From the loudspeaker enclosur e to today's professional touring concert systems, the need to communicate, to make the connection between the person speaking and the audience is foremost in our mind.
13-Ply Baltic Birch Cabinet 800W Program Power Handling 40 Hz to 400 Hz Frequency Response 98 dB Sensitivity @ 1W / 1m One 18” (46 cm) Cast Frame W oofer with 4” (10 cm) V oice Coil and 109 Ounce .
The two 4-Pole Speakon ™ connectors and the two 1/4" phone jacks are wired in full parallel so that any one of the connectors may be used as an input and the other connector as an output to another subwoofer. This allows the multiple cabinets to be "daisy chained", eliminating the need for several long runs of speaker cable.
MONITOR AMP OUT MAIN AMP OUT MON. AMP IN MAIN AMP IN MAIN OUT POWERED MIXER PCN-2 ELECTRONIC CROSSOVER INPUT HIGH OUT LOW OUT FULL RANGE INPUT C-12 or C-15 FENDER TRIPOD ST AND C-18 - ∞ - ∞ - ∞ - ∞ - ∞ - ∞ 5 After the speaker system has been placed, the crossover point needs to be set for maximum benefit.
B IN C-12 or C-15 MONITOR OUT MAIN OUT UNPOWERED MIXER SP A-13000 A IN A OUT M-500 MONITOR AMPLIFIER IN OUT SPL 1285 MK-II MONITOR SPEAKER FULL RANGE INPUT FULL RANGE INPUT INPUT LOW OUT HIGH OUT SPL .
MONITOR OUT MAIN OUT UNPOWERED MIXER M-500 MONITOR AMPLIFIER IN OUT SPL 1285 MK-II MONITOR SPEAKER SPL 1285 MK-II MONITOR SPEAKER IN A Out C-12 or C-15 SUBWOOFERS INPUT LOW OUT HIGH OUT C-18 PCN-2 ELE.
MODEL CS-18 PART NUMBER 071-1310-300 MAXIMUM dB SPL OUTPUT LONG TERM 124 dB DRIVER 18" (46 cm) cast frame woofer 4" (10 cm) voice coil 109 ounce (3.
An important point after buying a device Fender CS-18 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fender CS-18 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fender CS-18 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fender CS-18 you will learn all the available features of the product, as well as information on its operation. The information that you get Fender CS-18 will certainly help you make a decision on the purchase.
If you already are a holder of Fender CS-18, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fender CS-18.
However, one of the most important roles played by the user manual is to help in solving problems with Fender CS-18. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fender CS-18 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
