Instruction/ maintenance manual of the product BXR 300C Fender
Go to page of 7
THE SOUN D THA T CREA TES LEGENDS P/N 040294 Owner , s Manual BXR 300C BXR 300R.
INTRODUCTION The Fender BXR 300 AMPLIFIER is the most recent effor t in state of the art bass amplifier technology , and is a member of the FENDER BXR series.
The front panel contains all items necessar y for system operation and obser vation. Please read this section of the manual carefully to make sure you understand all the operational features of your new Fender BXR 300. The Front Panel is similar for both the 300R and 300C.
(L) SPEAKER: Speaker connections are four ohms minimum. The two jacks are wired in parallel. The BXR 300 is not designed for speaker impedance lower than 4 ohms total. (M) TWO SPEED F AN: The two speed fan normally runs at low speed, and will automatically go to high speed when things get loud.
T otal Impedance 4 Ohms BXR 410 SPEAKER OUTPUT INPUT INPUT IMPEDANCE 8 OHMS IMPEDANCE 8 OHMS FIGURE #2 BXR 410 T otal Impedance 4 Ohms BXR 115 BXR 115 SPEAKER OUTPUT INPUT INPUT IMPEDANCE 8 OHMS IMPED.
SUGGESTED FIRST TIME OPERA TION If this the first time you’ve used a FENDER BXR 300 we suggest that you tr y the following first time control setting procedure. Be sure the speaker is connected with a speaker cable (not an instrument cable) and the line cord is plugged into a suitable power source.
SPECIFICA TIONS POWER AMPLIFIER SECTION: Power output 300 W atts Rated load impedance 4 Ohms Distortion at rated power Less than .05% Damping factor , at 4 Ohms Greater than 100 Power bandwidth 20 Hz - 20 kHz Input sensitivity 1.
An important point after buying a device Fender BXR 300C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fender BXR 300C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fender BXR 300C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fender BXR 300C you will learn all the available features of the product, as well as information on its operation. The information that you get Fender BXR 300C will certainly help you make a decision on the purchase.
If you already are a holder of Fender BXR 300C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fender BXR 300C.
However, one of the most important roles played by the user manual is to help in solving problems with Fender BXR 300C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fender BXR 300C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
