Instruction/ maintenance manual of the product CG-406 Fagor
Go to page of 6
ES - MANUAL DE INSTRUCCIONES PT - MANUAL DE INSTRUÇÕES EN - INSTRUCTIONS FOR USE FR - MANUEL D’UTILISA TION DE - GEBRAUCHSANWEISUNG IT - MANUALE DI ISTRUZIONI EL - ENTY¶√ √¢∏°πøN HU - H.
8 1 2 3 4 9 7 12 11 10 6 5 1. T apa del depósito 2. Botón para abrir 3. Nivel de agua 4. Depósito 5. T apa de la jarra 6. Jarra de cristal (modelo CG-306, CG-314, CG-406, CG-412) 7. Placa calefactora (modelo CG-306, CG-314, CG-406, CG-412) 8. Control del aroma (modelo CG-416 TH) 9.
9 1. W ater container lid 2. Open button 3. W ater level 4. W ater container 5. Jug lid 6. Glass jug (model CG-306, CG-314, CG-406, CG-412) 7. Hotplate (model CG-306, CG-314, CG-406, CG-412) 8. Aroma control (model CG-416 TH) 9. Rotary filter support 10.
10 Select the minimum length of cord required to plug it into its electrical socket. • Do not touch the hot surfaces of the appliance. Use the handles. Do not allow the cord to touch the hotplate. • In the event that the appliance cord becomes damaged, contact an authorised Service Centre to have it replaced.
• With model CG-306, CG-314, CG-406, CG-412, when the coffee is made, the cof fee jug will remain hot due to the thermostat cycle to activate the water heater (7). • With model CG-416 TH, the thermal jug (1 1) will keep the coffee hot even when you switch off the cof fee maker .
coffee maker . Wait until all of the solution has filtered through to the jug. • Repeat this operation two or three times, depending on how much limescale there is in your coffee maker . • After you have removed the limescale, operate your coffee maker two or three times with just water so as to remove any vinegar left behind.
An important point after buying a device Fagor CG-406 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fagor CG-406 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fagor CG-406 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fagor CG-406 you will learn all the available features of the product, as well as information on its operation. The information that you get Fagor CG-406 will certainly help you make a decision on the purchase.
If you already are a holder of Fagor CG-406, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fagor CG-406.
However, one of the most important roles played by the user manual is to help in solving problems with Fagor CG-406. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fagor CG-406 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
