Instruction/ maintenance manual of the product 1FET-211 W Fagor
Go to page of 12
W ASHING MACHINE INST ALL A TION , OPERA TING AND MAINTENAN CE INSTRUCTIONS INST ALL A TIONS-, GEBRAUCHS- UND PFLEGEANLEITUNG FÜR EINE W ASCHMASC HINE NÁV OD K INS T ALA CI POUŽITÍ A ÚDRŽBĚ PRA.
2 Page 3 Strona 27 . 35 EN PL RU Warning : Before installing and using your appliance, please carefully read this Guide to Installation and Use, which will allow you to quickly familiarise yourself with its operation.
3 EN 1 / INTRODUCTION TO YOUR MACHINE Control panel Handle for opening the lid (remains locked during the cycle) Lever for raising the machine on castors (depending on the model) Drain hose Cross clam.
4 EN 2 / INSTALLING YOUR MACHINE D 10 D 1 1 D 12 10 mm 3/4 D 3 F G 1 1 2 2 13 a b a b 1 2 1 2 A D 4 D 7 D 8 D 9 D 5 D 6 •REMOVING THE TRANSPORT CLAMPS Important : Before using the machine in any way, you must first perform the following operations.
5 EN 3 / PREPARING YOUR WASHING AND YOUR MACHINE ➀➁ ➃ ➂ ➀ Pre-wash container (powder) ➁ Wash container (powder or liquid) ➂ Softener ➃ Bleach : POWDERED DETERGENT : LIQUID DETERGENT cl D 13 D 1 4 •CONNECTING TO THE ELECTRICITY SUPPLY Important: For your safety, you must comply with the instructions below.
6 EN 4 / PROGRAMMING YOUR MACHINE •PROGRAMMING Information: All the buttons are on micro- switches and do not remain depressed. In any case, the”Start/Pause” button cannot cancel a programme.
7 EN 4 / PROGRAMMING YOUR MACHINE •Maintaining your machine’s performance (Maintaining the pump filter): You must clean the drain pump filter regularly (for how to do this, see the section “CLEANING THE PUMP FILTER”). Important : Your machine’s performance can be affected if you do not clean the pump filter regularly.
8 EN 4 / PROGRAMMING YOUR MACHINE •DETAILS OF THE OPTIONS •Prewash Specially designed for heavily soiled washing (mud, blood, etc.). A specific initial agitation in cold water precedes a phase of heating to 30°C. This agitation phase in cold water enables the particles soiling the washing to be removed before the water is heated.
9 EN 5 / MAINTAINING YOUR MACHINE 2 1 CLANG 1 2 A D 1 5 D 20 D 21 D 22 D 23 D 24 D 25 D 16 D 1 7 D 18 D 19 •CLEANING THE PUMP FILTER (Option 1) The way to access your pump filter may differ according to the model of the machine (see options 1 and 2).
10 EN 6 / INCIDENTS AND MEANING OF PARTICULAR LIGHTS FLASHING •MESSAGES INDICATED BY THE VARIOUS LIGHTS FLASHING •Incidents indicated, which you can rectify yourself In this section, we explain how you can rectify these incidents very easily yourself.
.
G1722-01 10/05 Translation agency ALIZÉ Traduction.
An important point after buying a device Fagor 1FET-211 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fagor 1FET-211 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fagor 1FET-211 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fagor 1FET-211 W you will learn all the available features of the product, as well as information on its operation. The information that you get Fagor 1FET-211 W will certainly help you make a decision on the purchase.
If you already are a holder of Fagor 1FET-211 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fagor 1FET-211 W.
However, one of the most important roles played by the user manual is to help in solving problems with Fagor 1FET-211 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fagor 1FET-211 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
