Instruction/ maintenance manual of the product MKP 2000 Extron electronics
Go to page of 35
User ’ s Manual Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Extron Electronics, Eur ope Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 Extron Electronics, Asia 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.
Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock.
MKP 2000 Remote Control Panel • Quick Start Guide QS-1 Install and set up the MKP 2000 as follows: Step 1 T urn all of the equipment off and disconnect it from the power sour ce. Step 2 Install the cables to and from the control panel in a wall, podium, or desk.
MKP 2000 Remote Control Panel • Quick Start Guide Quick Start Guide — MKP 2000, cont’d i MKP 2000 Remote Control Panel• Table of Contents Chapter 1 • Introduction .......................................................... 1-1 About the MKP 2000 Remote Control Panel .
ii MKP 2000 Remote Control Panel • Table of Contents T able of Contents, cont’d MKP 2000 Remote Control Panel 1 Chapter One Introduction About the MKP 2000 Remote Control Panel 68-971-01 A 01 05 All trademarks mentioned in this manual are the pr operties of their respective owners.
MKP 2000 Remote Control Panel • Introduction MKP 2000 Remote Control Panel • Introduction Introduction This manual provides installation and operation instructions for the Extron MKP 2000. About the MKP 2000 Remote Control Panel The MKP 2000 is a network-r eady remote contr ol panel that can control any Extr on matrix switcher.
MKP 2000 Remote Control Panel • Introduction MKP 2000 Remote Control Panel • Introduction Introduction 2 Chapter T wo Installation MKP Installation Overview UL Requirements for Wall Box Installati.
MKP 2000 Remote Control Panel • Installation MKP 2000 Remote Control Panel • Installation Installation 2-3 UL Requirements for W all Box Installation The following Underwriters Laboratories (UL) requirements pertain to the installation of the MKP 2000 into a wall or furniture (figure 2-1).
MKP 2000 Remote Control Panel • Installation MKP 2000 Remote Control Panel • Installation Installation, cont’d Preparing the site, installing the mud ring or wall box Choose a location that allows cable runs without interference. Allow enough depth for both the wall box and the cables.
MKP 2000 Remote Control Panel • Installation MKP 2000 Remote Control Panel • Installation Installation, cont’d 2-6 7a . If you are using a mud ring , follow the directions, if any , that came with the mud ring to attach the clips that fasten the ring to the wall or furniture (figur e 2-3).
MKP 2000 Remote Control Panel • Installation MKP 2000 Remote Control Panel • Installation Installation, cont’d 3 . Mount the MKP’s faceplate to the mud ring or wall box with machine screws (figure 2-5). M K P 200 0 4 5 6 1 23 7 8 9 B A C K 0 CANC EL INPUT OUTPUT TAKE R Figure 2-5 — Mounting the MKP to the wall box 4 .
MKP 2000 Remote Control Panel • Installation MKP 2000 Remote Control Panel • Installation Installation, cont’d Control connections The MKP has two RS-232 ports; a Host port ( 1 ) and a Switcher port ( 2 ); and an Ethernet (LAN) port ( 3 ).
MKP 2000 Remote Control Panel • Installation MKP 2000 Remote Control Panel • Installation Installation, cont’d TP cable termination It is vital that your Ethernet cables be the correct cables, and that they be pr operly terminated with the correct pinout.
MKP 2000 Remote Control Panel • Installation Installation, cont’d MKP 2000 Remote Control Panel 3 Chapter Thr ee Local Operation Front Panel Controls and Indications Front Panel Operations Rear Panel Resets 2-14 Power supply wiring Figure 2-12 shows how to wir e the connector .
MKP 2000 Remote Control Panel • Local Operation MKP 2000 Remote Control Panel • Local Operation Local Operation 3-2 Front Panel Controls and Indications MKP 2000 456 123 789 BACK 0 CANCEL INPUT OU.
MKP 2000 Remote Control Panel • Local Operation MKP 2000 Remote Control Panel • Local Operation Local Operation, cont’d When an input or output outside the available range for this MKP or the connected matrix switcher is selected, the LED display shows N - A .
MKP 2000 Remote Control Panel • Local Operation MKP 2000 Remote Control Panel • Local Operation Local Operation, cont’d 1 9 21 6 8 .2 5 42 5 3 .. 2 5 52 5 5 .0 0 00 0 0 .. 0 0 00 0 0 .0 0 00 0 0 .. 0 0 00 0 0 . . . . . . . . . . . . . 0 0 00 0 0 .
MKP 2000 Remote Control Panel • Local Operation MKP 2000 Remote Control Panel • Local Operation Local Operation, cont’d 3-8 Control panel security lockout (executive mode) The front panel security lockout limits the MKP’s front panel operation to input and output selection only (IP addr ess modification is locked).
MKP 2000 Remote Control Panel • Local Operation Local Operation, cont’d MKP 2000 Remote Control Panel 4 Chapter Four SIS Operation RS-232 Links Ethernet Link Host-to-MKP Instructions MKP-Initiated.
MKP 2000 Remote Control Panel • SIS Operation MKP 2000 Remote Control Panel • SIS Operation SIS Operation RS-232 Links The MKP’s rear panel 3-pole, 3.
MKP 2000 Remote Control Panel • SIS Operation MKP 2000 Remote Control Panel • SIS Operation SIS Operation, cont’d This message means that the switcher requires an administrator or user level passwor d before it will perform the commands entered via this link.
MKP 2000 Remote Control Panel • SIS Operation MKP 2000 Remote Control Panel • SIS Operation SIS Operation, cont’d Symbol definitions for MKP SIS commands = CR/LF (carriage return/line feed) (0x0.
MKP 2000 Remote Control Panel • SIS Operation MKP 2000 Remote Control Panel • SIS Operation SIS Operation, cont’d Command/response table for MKP SIS commands (continued) Command ASCII Command Re.
MKP 2000 Remote Control Panel • SIS Operation MKP 2000 Remote Control Panel • SIS Operation SIS Operation, cont’d Command/response table for MKP SIS commands (continued) Command ASCII Command Re.
MKP 2000 Remote Control Panel • SIS Operation SIS Operation, cont’d MKP 2000 Remote Control Panel 4-14 5 Chapter Five HTML Operation Download the Startup Page System Status Page System Settings Pa.
MKP 2000 Remote Control Panel • HTML Operation MKP 2000 Remote Control Panel • HTML Operation HTML Operation 5-3 5-2 5 . Press the keyboard Enter key . The MKP checks to see if it is password protected. If the MKP is not password pr otected, proceed to step 7 .
MKP 2000 Remote Control Panel • HTML Operation MKP 2000 Remote Control Panel • HTML Operation HTML Operation, cont’d 5-5 5-4 System Status Page The System Status page (figure 5-2) provides an overall view of the status of the MKP , including various IP addresses, the status of the Host and Switch RS-232 ports, and the voltage.
MKP 2000 Remote Control Panel • HTML Operation MKP 2000 Remote Control Panel • HTML Operation HTML Operation, cont’d 5-7 5-6 IP Settings section Unit Name field The Unit Name field contains the locally-assigned name of the MKP . This name field can be changed to any valid name, up to 24 alphanumeric characters.
MKP 2000 Remote Control Panel • HTML Operation MKP 2000 Remote Control Panel • HTML Operation HTML Operation, cont’d 5-9 5-8 Authorized inputs and authorized outputs Y ou can use the Authorized Inputs and Authorized Outputs drop boxes to narr ow the number of inputs and outputs that are controllable fr om the MKP .
MKP 2000 Remote Control Panel • HTML Operation MKP 2000 Remote Control Panel • HTML Operation HTML Operation, cont’d 5-11 5-10 Passwords Page Access the Passwords page (figure 5-5) by clicking the Configuration tab and then the Passwords link on the left side of the System Settings page.
MKP 2000 Remote Control Panel • HTML Operation MKP 2000 Remote Control Panel • HTML Operation HTML Operation, cont’d 5-13 5-12 7 . Click the Browse button. An open file window appears (figure 5-7). Figure 5-7 — Firmware upgrade open file window 8 .
MKP 2000 Remote Control Panel • HTML Operation HTML Operation, cont’d MKP 2000 Remote Control Panel 5-14 Special Characters The HTML language reserves certain characters for specific functions. The MKP will not accept these characters as part of its name, passwords, or locally cr eated file names.
MKP 2000 Remote Control Panel • Reference Data MKP 2000 Remote Control Panel • Reference Data Reference Data A-3 A-2 Specifications Control/remote — keypad Extron remote key pad control .. (2) 3.5 mm, 3-pole captive screw connectors General External power supply .
MKP 2000 Remote Control Panel • Reference Data MKP 2000 Remote Control Panel • Reference Data Reference Data , cont’d A-5 A-4 Mounting and Cabling Specifications Electrical box cutout Any standard box that meets the local electrical codes can be used, but boxes from dif ferent manufacturers can have different size openings.
MKP 2000 Remote Control Panel • Reference Data Reference Data , cont’d Extron Comm-Link cable W ire specifications for Extron Comm-Link cable (figure A-2) are as follows: A (red) = 18 A WG B (viol.
An important point after buying a device Extron electronics MKP 2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronics MKP 2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronics MKP 2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronics MKP 2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronics MKP 2000 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronics MKP 2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronics MKP 2000.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronics MKP 2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronics MKP 2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
