Instruction/ maintenance manual of the product MLS 304 Extron electronic
Go to page of 2
Power Supply Replacement Instructions for the MLS 304/306/406 1. Disconnect the power cord from the switcher . 2 . If the switcher is rack mounted, remove it fr om the rack. 3 . Remove the 14 screws (8 on the top and 3 on each side) that secur e the switcher ’s top cover , as shown below .
If the optional 5-wire power output cable needs to be installed, r eplace the power supply’s power output cable with the cable shown below . A switcher PCB with part #20-601-xxx and the MLS 306’ s PCB both use a 6-pin power output connector .
An important point after buying a device Extron electronic MLS 304 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic MLS 304 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic MLS 304 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic MLS 304 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic MLS 304 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic MLS 304, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic MLS 304.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic MLS 304. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic MLS 304 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
