Instruction/ maintenance manual of the product MLC 62 RS D Extron electronic
Go to page of 4
Product Category IMPORT ANT : Go to www .extron.com for the complete user guide and installation instructions before connecting the product to the power source. MLC 60 Series • Setup Guide for the MLC 62 RS D, MLC 62 IR D, and MLC 64 RS VC D The MLC 60 D Series are keypad controllers for use in classrooms and meeting facilities.
MLC 60 Decora Series • Setup Guide (Continued) 2. Change the faceplate, buttons, and volume control knob as needed. a. (MLC 64 RS VC D only) If changing the faceplate on the MLC 64 volume control module, first remove the volume knob: 1. Rotate the knob until the dot on the knob is aligned with the bottom edge of the volume icon on the faceplate.
Product Category z Port B IR/S (RS models) or Port A IR (IR models): Connect a display device, switcher , or up to two IR emitters to this port. On RS models, you can configure Port B IR/S for either serial or IR communication, using the MLC 60 Series configuration program.
68-2166-50 Rev . A 11 11 Extron USA - W est Headquarters + 800.633.9876 Inside USA/Canada Only +1.714.491.1500 +1.714.491.1517 FA X Extron USA - East +800.633.9876 Inside USA/Canada Only +1.919.863.1794 +1.919.863.1797 FA X Extron Eur ope +800.3987.6673 Inside Europe Only +31.
An important point after buying a device Extron electronic MLC 62 RS D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic MLC 62 RS D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic MLC 62 RS D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic MLC 62 RS D you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic MLC 62 RS D will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic MLC 62 RS D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic MLC 62 RS D.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic MLC 62 RS D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic MLC 62 RS D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
