Instruction/ maintenance manual of the product JMP 9600 HD Extron electronic
Go to page of 4
This guide provides quick start instructions for an experienced installer to set up and operate the Extron ® JMP 9600 HD and JMP 9600 2K Media Players. NOTE: For full installation, configuration, and operation details, see the JMP 9600 Media Player User Guide , available at www .
2 f L TC Input and Output connectors — L TC Input connector — Connect an external L TC sync signal to this RCA connector for the media player to function as a sync slave of another device.
3 l Dual Redundant AC Power Input connectors — Connect standard IEC power cords between one rear panel AC Power Input connector and a 100 to 240V AC, 50-60 Hz power source. WARNING : Physically disconnect both power cables from the player before opening the case for servicing.
68-19 43 -50 Rev A 10 10 4 Load and Play a Pr esentation Load and play a presentation as follows: NOTE The player must be correctly configured for the clip or playlist that you select using the Settings > Video submenu, or else the player does not load the selected clip or playlist and the LCD reports ERROR.
An important point after buying a device Extron electronic JMP 9600 HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic JMP 9600 HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic JMP 9600 HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic JMP 9600 HD you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic JMP 9600 HD will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic JMP 9600 HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic JMP 9600 HD.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic JMP 9600 HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic JMP 9600 HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
